Mark! Glad everyone is ok and yes 2nd Amendment shall not be infringed. Couldn’t agree more!
@thepeyotecoyote59944 күн бұрын
Some folks are nuts!
@slowls75078 күн бұрын
Did you add clear coat at the end or is it just the c series?
@thepeyotecoyote59944 күн бұрын
Just c series
@thetoneknob44939 күн бұрын
i used a lil bit of Vaseline and some uchigo powder..uchigumori is a Japanese natural wet stone used by sword polishers and in powder form it has many uses, i used it to lap the bolt and action for a silky smooth finish that greatly improved cycling the bolt. its a rem mod of 1917. and i picked it over a budget option as it was only tagged at 199$ and was the cheapest 30-06 in the shop because it was not original anymore. it has an old weaver k4 that has a custom reticle on it and turned out to be a full house custom build from the action up with a med heavy 25 inch barrel..im still surprised how good a deal i got that day..the stock is worth more than that lol.and it shoots tiny groups!
@jayw9479 күн бұрын
The dial locks works with no problems
@socopatriot1715 күн бұрын
We still watch them! Keep them coming brother
@mateoh.373516 күн бұрын
I thought there was a physical key backup in case the keypad quits working? If there isn’t that’s pretty lame.
@thepeyotecoyote599414 күн бұрын
There is but slow to open in an emergency
@myvenusheeler9 күн бұрын
You do realize NO UL rated safe that uses an electronic lock has a key backup. If it did it would never get a UL burglary rating.
@AlwaysSlimShadyBro21 күн бұрын
They are awesome
@powelloutdoorservicesllc502422 күн бұрын
Great info they have a Father's Day sale on the safes.. I'm going to shoot my shot.
@tomcarvelli646422 күн бұрын
If you don't have a buffing wheel you can get the same results with Mothers Mag and Aluminun Polish. 2000 grit snadpaper will also work. Polish after using 400 or 600 grit sandpaper to knock off the rough spots. A popcicle stick with fine sandpaper will work on the inside of the receiver. I recently did it to a Ruger Hawkeye stainless. It is now smoother than a Tikka.
@thepeyotecoyote599414 күн бұрын
Little work goes a long way
@just_julian22 күн бұрын
The Daniel Defense DDM4V7 California compliant model comes with a factory installed mag lock system that can still hold the bolt open. I just used the hellfire takedown pin and that's it. Solid option for anyone who is curious
@thepeyotecoyote599414 күн бұрын
Nice
@1833said22 күн бұрын
You ever consider that its finished like that for a reason 🧐
@thepeyotecoyote599414 күн бұрын
Do tell if you think you know? I know its extra work to smooth the machine marks driving up the price
@1833said13 күн бұрын
@@thepeyotecoyote5994 It helps gas relief and gives dirt/debris somewhere to go and helps the action of the bolt/ cartridge extraction ps the process to flute a bolt is way more expensive than a fine tumble for a smooth finish…..🫠 educate yourself stay safe
@cristhered752225 күн бұрын
I got a anderson 556 ar15 for under 500 in california yeah okay
@lartiga26 күн бұрын
This is the best Ca compliant kit by far: kzbin.info/www/bejne/jHiqnKSkgc6CotU
@earldelsantoАй бұрын
California gun laws are so rediculous. For that one reason alone i wouldnt live there. I lived there back in 1967 threw 1975......back when cal was cool
@thepeyotecoyote599424 күн бұрын
Yup it sucks
@wes2393Ай бұрын
great vid. that sound almost reminds me of the running your fingernail across one of those old holographic notebook covers. just curios, what made you choose 600 grit vs a higher grit?
@thepeyotecoyote599414 күн бұрын
Its fast you can use higher grit just takes longer
@cowycowy2469Ай бұрын
🎉thanks….
@KYRebeiАй бұрын
Definitely do not use an aftermarket magazine. I purchased a used one for $199 and had nothing but jams. I did not know until I sent it to Bersa for repair that it had an aftermarket magazine in it. They replaced it with a Bersa magazine, and sent it back, within 3 weeks, in a nice box which I did not have at the time of purchase. One other caution using ammo... Do not use cheap Eastern European ammo such as Herzog.
@thepeyotecoyote599414 күн бұрын
I use them mine are ok but I have heard that
@juncho1977Ай бұрын
How about using polishing compound? Would that work quicker than oil?
@AngelGarcia-jo9ssАй бұрын
That's sweet!
@thepeyotecoyote599414 күн бұрын
Very!
@cornpop8570Ай бұрын
Thats what happens when you vote for Democrats. 👎🏼
@cornpop8570Ай бұрын
Leave California and never go back best thing i ever did and i definitely do not miss it.
@matthewlewis-zw3tfАй бұрын
Thanks buddy. I want the firestorm for edc concealed.
@thepeyotecoyote599414 күн бұрын
Nice gun for the money
@johnlong7504Ай бұрын
Thanks for your nice info-clip and yes, I'll do that to my Ruger American Rifle .308 I have received yesterday.
@pete3882Ай бұрын
I'm in the market for a safe. I will go with manual lock. After hearing about your issue, I guess I will skip this company.
@myvenusheeler9 күн бұрын
Buy an American Security safe.
@buisnessemail9109Ай бұрын
Just go featureless
@thepeyotecoyote599414 күн бұрын
I agree
@buisnessemail910913 күн бұрын
When im in public range in CA no flash hider 3d printed juggernqut grip and no front vertical grip its.
@user-rq2yk3rr6vАй бұрын
Never be compliant
@thepeyotecoyote599414 күн бұрын
Well you know
@rogerpayne3161Ай бұрын
I would give you 5 stars but never ever do what you did without after polishing use a can of brake cleaner to get all that grit that is embedded into the bolt washed off. It will embed itself in the railways and you will never get it out!!
@thepeyotecoyote599414 күн бұрын
Hasnt been an issue
@1handor22 ай бұрын
C'mon Man get Phut out of Kommifornia , its so sad that you people don't move on. Freedom is something you can't achieve in a Communist State
@thepeyotecoyote599414 күн бұрын
Your right in due time
@1handor213 күн бұрын
And I'm not saying you should stop fighting but the point is you need to take your taxes your fees that you pay for in gas and goods and services, you need to take that money elsewhere all it's doing is being collectively used against you for them to arbitrarily write legislation to take whatever power citizens might have away from them enough people moving enough funds are lost at some point they'll have to figure out a different plan and hopefully that means citizens will gain back more of that state
@jorge665182 ай бұрын
Thank you for showing us your effort. Came out really nice! Congrats,and keep doing contents!
@IndependentArmz2 ай бұрын
move from California
@eliaaronoct2 ай бұрын
Why are you flippin people the bird in this video.....?
@thepeyotecoyote599414 күн бұрын
?
@shanelowe39022 ай бұрын
What. A. Pain. They definitely need to support their poor product.
@toytech16792 ай бұрын
Sucks to hear about such terrible service. It's all about just taking your hard earned money. Not that it's any consolation now, but I have never liked digital devices of any kind. My safes have the mechanical dials. A lot less likely to fail.
@sinistar4262 ай бұрын
As quiet as it can be made, during the time that it counts "loading a round" itll make all kinds of noise popping a shell in the chamber.
@KevinBoyles-ui6xm2 ай бұрын
Man that turned out great looking
@thepeyotecoyote59942 ай бұрын
Thank you sir!
@anibal1342 ай бұрын
big hands? get the Bersa Thunder 380 Plus 15+1, bigger grip for sure, double stack, will fit better in your hand
@thepeyotecoyote59942 ай бұрын
unfortunately not in CA 10 round only
@anibal1342 ай бұрын
@@thepeyotecoyote5994 can you get it from a different State?
@thepeyotecoyote599413 күн бұрын
Not in ca
@tubero372 ай бұрын
😅😅 I did exactly the same modification with the Juggernaut and the AR maglock. I also didn't like that I couldn't lock the bolt open.
@thepeyotecoyote59942 ай бұрын
yup pinned and finned is the way and its only 12 bucks for a finned grip
@joejordan12592 ай бұрын
I own 2 of them. And unfortunately, I have to say they are complete junk. They have a slide problem that the gunsmiths can't fix and you can't disassemble it without the possibility of taking hours for that slide to catch complete piece of junk very dangerous to use no quality control anymore. I'm gonna spend some money and get me a sig 380, at least I know. I can put the slide back on haha, ha.
@thepeyotecoyote59942 ай бұрын
interesting most folks like them did you contact Bersa?
@marladogoz3 ай бұрын
How long did this take you?
@thepeyotecoyote59942 ай бұрын
a couple of hours not to bad
@user-su1rw1ic5h3 ай бұрын
Hate that happened to ya,, especially the finish
@thepeyotecoyote59942 ай бұрын
pretty strange! Thanks for watching
3 ай бұрын
I left New York when I was 18 and I’ve been in Florida 20 years and it’s the best state in the country who in their right mind would live in that fucking dump of California. I just looked over at my 21 loaded 30 round magazines and smiled.
@thepeyotecoyote59942 ай бұрын
I am a native I stay to care for my elderly parents
@OneofMyTurns3 ай бұрын
You could also do the same thing to your hammer if it’s SS. Make it shine like a mirror!!
@Diondjg13693 ай бұрын
Sorry gonna say it ! As a free , non criminal, felon, American my rifles will operate as per specs! CA leos/ government agencies do use these tools nor do I. Freedom.
@thepeyotecoyote59942 ай бұрын
different set of rules for them but what if the restrictions were the same?
@STAGG45703 ай бұрын
I'm currently studying this for my class @ SDI. Your bolt turned out super neat! I never knew how the process actually took place. I'm sure there are possibly machine's that are run by computer's to do this process, but what's the fun in that..? :) Thanks for the video.
@thepeyotecoyote59942 ай бұрын
Good luck!!
@gameadd1ct2133 ай бұрын
Thanks for this. Next I want to know how to eliminate this incredibly loud noise from the safety switch which alerted a deer and cost me last year.
@NPHTV123 ай бұрын
Thinking of getting the gen 4 with kingpin im really not liking this juggernaut kit on my ar15
@thepeyotecoyote59942 ай бұрын
Get a finned grip much faster
@NPHTV122 ай бұрын
@@thepeyotecoyote5994 ended up with gen 4 maglock a lot smoother , I don’t like the fin grip much
@pitsnpistols10053 ай бұрын
This was the first firearm I ever purchased back in 2014, I payed 299.99 before transfer fees! Great beginner gun, learned gun safety and tbh, the safety bright me so much peace of mind as a newby!
@janemarkham41333 ай бұрын
REAL NICE 1911, GREAT VEDIO!!!! THANKS BROTHERMAN!!!!😀👍👍🤟🤘
@ruggedmohawk3 ай бұрын
can you share you’re parts list?
@thepeyotecoyote59942 ай бұрын
i linked the places to buy below do you have any specific questions?
@user-iv5lr7bt1r3 ай бұрын
Did you have any problems when you split your rifle? Like paint filling the gap? I’m thinking on doing this did you have to run a razor down the seem?