5 ай бұрын
Пікірлер
@Fredhobby 18 сағат бұрын
Hi, great video! Can this orange pi do video looper? Can it use raspberry pi os? Thank you
@pi1325 Күн бұрын
I wanna connect from my android phone and tablet. Where doni need to enter that ip? In google chrome i can connect to ha with that ip but not to smb. NVM. Samba is shown in sidebar and you can add files feom there, without connecting to a PC
@alvinl8488 Күн бұрын
Thanks for this video! Helped me out a lot!
@rippedray Күн бұрын
how do you get that window to open to be able to do the ssh for windows?
@miroslavradumilo Күн бұрын
I've build it using same components and procedure as you described. Also used the code from your site and changes mode: mono to channel: mono. Installig of code is working fine. However, when I turn "use wake word" switch to on, audio crackles.
@nickdenolf Күн бұрын
Very nice! Thumb up from me... I installed the new alpha build Home-Assistant-Matter-Hub and it actually works very good... I can now also use voice commands through Google to control the lights... Any idea if other way around is possible? For example trigger a voice command 'dishwasher done' towards the google hub when home assistant detects it is done ???
@刘森-f9d 2 күн бұрын
Can Uconsole use cm5 directly, or do you need a new adaptor board?
@SmartHomeCircle 2 күн бұрын
@@刘森-f9d adapter board is required to power it on..
@Trident_Euclid 2 күн бұрын
Did you run Home assistant bare metal or containerized/VM?
@SmartHomeCircle 2 күн бұрын
@@Trident_Euclid containerized.
@Solskogen 2 күн бұрын
What did you put on top of the thermal paste?
@SmartHomeCircle 2 күн бұрын
@@Solskogen its a copper shim. I have added a link in the video description.
@bm-cy7ek 19 сағат бұрын
@@SmartHomeCircleok dear
@lichao622 3 күн бұрын
The wake-up word is openwake, but can stt and tts support customization? Instead of using Wisper and Piper. Because I use funasr for stt and edge tts for tts
@dennischen8887 3 күн бұрын
Can this work with the gpi case 2?
@SmartHomeCircle 2 күн бұрын
I can't definitely say if it would work or not.
@ApexNick 4 күн бұрын
For speaker: mode: mono , do you mean speaker: channel: mono, or speaker: i2s_mode: {something other than mono) ? This is causing errors. Thank you
@SmartHomeCircle 3 күн бұрын
Yes.. ESPhome has changed this since I made the video. I will update it to the latest configuration in the article.
@SmartHomeCircle 3 күн бұрын
@ApexNick I updated the article with the updated configuration. Thank you for letting me know 🙂
@ApexNick 3 күн бұрын
@@SmartHomeCircle thank you. I'm going to build the one with LED strip. Just waiting for the s32 terminal breakout board to arrive. Never realized before you can't just plug them in to a regular breadboard
@SmartHomeCircle 3 күн бұрын
@@ApexNick can you may be check my latest voice assistant video using ESP32-S3? Currently that is something that is trending with on device wake word.
@jeremyjohnson8703 4 күн бұрын
So the Type-C is PD only, no data?
@SmartHomeCircle 4 күн бұрын
Yes. Only PD..
@jeremyjohnson8703 4 күн бұрын
@SmartHomeCircle bummer. Was excited about an actually viable x86 sbc but that's a deal breaker.
@jleroux61 4 күн бұрын
Thank you for your video. Very interesting. Could you do a video on your setup of the Home Assistant Voice Assistant Performance on orange pi 5 max? Did you use supervisor? Thanks
@SmartHomeCircle 4 күн бұрын
@@jleroux61 I used Home Assistant container on it. I also ran Whisper and Piper containers on it and checked the performance. I have videos on my channel to run HA as a container and also my videos around the Voice Assistant has the container setup videos also. So you can check those out. You can also check my site where these are also in the form of articles..
@thorstenhansgehrig 4 күн бұрын
Would be nice if a link to an working configuration would be always updated... mine was working earlier and broke through updates... now i have a hard time to adjust myself... would be happy if an updated working config would be somewhere
@SmartHomeCircle 4 күн бұрын
@@thorstenhansgehrig can you check the video description, there is a link to my article which contains the updated configuration.
@thorstenhansgehrig 4 күн бұрын
@@SmartHomeCircle And this does also throw an error... seems no longer working. Is this only me?
@SmartHomeCircle 4 күн бұрын
@@thorstenhansgehrig Give me sometime. I'll update what I have currently running.
@SmartHomeCircle 4 күн бұрын
@thorstenhansgehrig I updated this blog with the latest configuration that I am currently running. It also has the timer functionality in it. smarthomecircle.com/add-timers-to-voice-assistant-on-device-wake-word-home-assistant
@cagrsimsek601 5 күн бұрын
Hello I want to use both HomeAssistant and OpenMediaVault on Raspberry Pi 5. How can I do this?
@SmartHomeCircle 4 күн бұрын
Technically You could install OMV first and then run HA as a docker container. But the PI5 is too slow to run both and may not perform well.
@LivnlargeCO 6 күн бұрын
I have been working on getting my ESP32-cam into frigate for over a week, and your guide has gotten me closer than any previous...so first and foremost, thank you. The key that I never saw anywhere prior was the addition of the input_args: "" line! Maybe there have been some changes in the year since you made this video as I am using Frigate V: 0.14.1 but I am unable to get recordings or any detection. Of note is that my config will fail if I enter the output_args: section. I did my research and tried a few options from the Frigate output args presets, but still cannot get anything into the config. Would you be able to offer any assistance?
@superangrybrit 6 күн бұрын
ROOBI is awesome!
@jackipiegg 6 күн бұрын
Why is there no power consumption review? Since you use home assistant, you should get a smart meter and show us the power consumption.
@SmartHomeCircle 6 күн бұрын
I completely forgot to add it to my video. Ill update my article with my findings. So at idle it uses 10 to 11 watts of energy while on stress test it went upto 21 watts.
@bm-cy7ek 19 сағат бұрын
He forgot, what does you not understand jackipig?
@DimuthuRW 6 күн бұрын
can you please share repository address please
@SmartHomeCircle 6 күн бұрын
Check the article in the video description..
@張三-q8q 6 күн бұрын
Pi is sucks but best OS & software supported, which choice is clear😇
@esteban1754 7 күн бұрын
Hello, do you know how I can make the fan turn on at 50 degrees C because turning it on at 70 is a high temperature and turning it off at 40 C, thank you, I don't know much about this.
@CarstenWurtzDrone 7 күн бұрын
I had already done this for one device earlier, but I forgot how to do it :) Googled it and found your video, which was much better described than the first video, which I forgot. Thumps up from my end, as this was very well done. I'll see more of your videos in the future - you seam to be a very good educator.
@SmartHomeCircle 7 күн бұрын
Thanks you for such kind words. 😄 Such feedback keeps me going. Thank you once again.
@ozkantuzemen 8 күн бұрын
What's the thickness of the copper plate? It's a shame that it's not available anywhere apart from 4gb ram and the producer delays replenish the stocks.
@SmartHomeCircle 7 күн бұрын
I brought the 0.5 mm thickness for this. I have added a link in the video description to buy this.
@ozkantuzemen 7 күн бұрын
@@SmartHomeCircle I took a picture of the gap and let ChatGPT to calculate the height. The result was 0.69mm. I bought also 0.8mm copper plate just to be safe, if the SBC will be back in stock, I'll test it with that.
@SmartHomeCircle 7 күн бұрын
@@ozkantuzemen no issues. Dont forget about the heatsink paste. That could take up some space, maybe 0.1 mm
@bishalscreation 9 күн бұрын
Does it also work with ESP 32 and arduino nano
@SmartHomeCircle 8 күн бұрын
@@bishalscreation it would work with ESP32
@bishalscreation 8 күн бұрын
@SmartHomeCircle thank you
@Chookz85 9 күн бұрын
Was following this and it was working great until it tells me no more data centres are available on the trial version (when trying to select Central European)
@SmartHomeCircle 7 күн бұрын
Can you try again. May be they are available now?
@danielo2641 10 күн бұрын
I really like the esp32 voice assistant you built! It is possible to stream music (for example from Spotify) directly from the voice assistant? Would be a perfect replacement for Amazon Echo. 😁
@ronniemethod1242 10 күн бұрын
is it useful for home assistant for 3 bedroom apartment ?
@SmartHomeCircle 10 күн бұрын
It is definitely more powerful than the raspberry pi 5. You can run Home Assistant with the local voice assistant components like Whisper, piper on it and with quicker response times compared to the Raspberry pi 5. I have shown this in the video.
@manfredzimmer1199 10 күн бұрын
Good Job 👍👍👍
@SmartHomeCircle 10 күн бұрын
@@manfredzimmer1199 thank you 🙂
@chloeho9655 11 күн бұрын
I found out that a containerized version of Home Assistant doesn't contain the Add-Ons feature. Been trying to configure the Home Assistant OS or Supervised version on my Ubuntu server but I'm getting stuck... is there an alternative for Home Assistant Containerized or Core?
@SmartHomeCircle 10 күн бұрын
Home Assistant Addons are basically containers the Home Assistant run and manage. So you can run the addons as containers along with the Home Assistant container. I do this as I am running Home Assistant as a container as my daily driver. However, Sometimes it difficult to run an addon as container. Like sometimes HA builds the docker image on the HA instance itself. Like for this video I could not run the microphone addon as a container. But whisper and piper I could run them as containers. I have added the docker compose files for whisper and piper in the article that I have linked in the video description.
@chloeho9655 10 күн бұрын
@ thank you so much for your respond and help on this! will definitely check them out!
@goodcitizen4587 11 күн бұрын
Cool info, thanks!
@SmartHomeCircle 11 күн бұрын
Glad it was helpful! 🙂
@rodrigosiviero2558 11 күн бұрын
just want to thank you, you are one of the only ones who covers HA addons and integrations with docker. Keep up the good work your tutorials are really good.
@SmartHomeCircle 11 күн бұрын
@@rodrigosiviero2558 thank you . 🙂
@anilv3724 11 күн бұрын
It would be good to be put in a rack as a server also do some cluster projects. Please do compare it with Radxa X4
@SmartHomeCircle 11 күн бұрын
Yes.. the video is coming out soon..
@nitinkumar29 12 күн бұрын
The provided link page say it is depreciated 😢 and new project from the drveloper doesn't look the same. Can you please update to new project?
@SmartHomeCircle 11 күн бұрын
I will make a video about it. Currently the deprecated project works. It was deprecated recently. The new one is in alpha phase and might have bugs. So once it's at least in the beta phase I will make a video. So stay tuned.
@biosim5 7 күн бұрын
Theres another "updated" model by the same developer. In the same page the dude show the link
@nitinkumar29 7 күн бұрын
@@biosim5 I have tried to installed and could commission the bridge with success. It had initially some issue with connection but I have then restarted the HA and reloaded the addon and then could connect and commission. It doesn't look the same as previous one though. It had a bug also which I reported the developer and developer fixed it so all good.
@radimek100 12 күн бұрын
I have the same entities in zigbee automation as those in mqtt. Sensitivity and time settings
@SmartHomeCircle 10 күн бұрын
Nice. 👍
@guytas 12 күн бұрын
Thanks. But something is strange for me. When I ssh from another terminal, it works for logging in, but the prompt is like this: \[\e]0;\u@\h:\w\a\]\W $ and all the commands do nothing except invalid commands return zsh: command not found`abcde Any clue what this is? by the way, it works from within the HA terminal.
@SmartHomeCircle 10 күн бұрын
I guess its something related to how your terminal setup. What terminal are you using? Even though the output is "\[\e]0;\u@\h:\w\a\]\W $ " , the "$" tells that you are already accessing Home Assistant.
@alanaland1990 13 күн бұрын
Excellent video with just the right amount of detail for someone setting up Fully Kiosk for the first time. Thanks and cheers from Oz.
@SmartHomeCircle 12 күн бұрын
Glad I could help..🙂
@davidegiorgi1672 13 күн бұрын
hi, beautiful project, I made everything including the 3D printing, but when I go to give the voice command the microphone part doesn't seem to work... I put the pins as in your diagram and tried to change the channel writing from left to right ...do you have any idea why I can't get hey jarvis to start?
@SmartHomeCircle 10 күн бұрын
Can you make sure that the wires to the microphone are short? Like shorter than 10 cms. Also you can try to see what is recorded from the microphone by putting this option in the configuration.yaml file. ``` assist_pipeline: debug_recording_dir: /config/shared/assist_pipeline ``` This will record the audio as files in this location : /config/shared/assist_pipeline Use this option with caution as it may fill up the space very fast. So dont forget to remove it after you have finished debugging.
@davidegiorgi1672 10 күн бұрын
@@SmartHomeCircle hi i used dupont standard , microphone not working
@SmartHomeCircle 10 күн бұрын
Ok.. let me know if it works with a new microphone. You can buy it with the links in the video description.
@j.jordens4700 13 күн бұрын
This is what exactly I was looking for.
@SmartHomeCircle 13 күн бұрын
@@j.jordens4700 Glad I could help. 🙂
@jurekchlebowski1469 15 күн бұрын
Best description I have encountered on YT so far, step-by-step and detailed and in an acceptable pace. Thanks!
@SmartHomeCircle 13 күн бұрын
Glad I could help 🙂
@nocipoci 16 күн бұрын
Thank you for this explanation. Unfortunayely i just get an almost blang page when opening the WebUi. Did i miss something ?
@SmartHomeCircle 16 күн бұрын
@@nocipoci can you try refreshing? Sometimes it takes time to load.
@nocipoci 16 күн бұрын
I get a plus sign on the right to make a new bridge ??? No green interface at all..
@nocipoci 16 күн бұрын
Running hass on a Pi
@SmartHomeCircle 16 күн бұрын
@@nocipoci try following the video again. May be you missed something. I dont remember clicking on a plus symbol.
@nocipoci 16 күн бұрын
Will do
@guegiurm 17 күн бұрын
hi, great video! well done. I purchased the material as per the guide but I wonder, the LED strip is connected to the D1 mini which powers it, but the strip I purchased is the 5 meter one with 60 LEDs per meter. Powered by the D1 mini alone? Does the LED strip not need additional power? thanks
@SmartHomeCircle 17 күн бұрын
You can either cut 1 mtr from it and use it with the d1 mini directly or if you plan to use the 5 mtrs then you will have to power it with an external power supply of 5v. The D1 mini cannot provide the high current required for 5mts.
@ivanpesenti7977 18 күн бұрын
hi , great tutorial but i have a little problem : when the washer run the icon on card are black i cant see what kind of program washer making . you know why? tx for all
@SmartHomeCircle 17 күн бұрын
Do the other icons come up? Most of the time it's usually the id of the washer that is not configured properly in the card. Can you try checking it once again. I hope it works for you.
@mouhssinemhe4194 19 күн бұрын
Thank you for this video; about LG integration Still can't login
@SmartHomeCircle 17 күн бұрын
Ya.. same here. Not sure why..
@martinlupac5026 19 күн бұрын
Great video . And how do I do all this when I use Google Generative AI assistant for conversation and M 5 Stack Atom Echo as satellite? I'm a beginner, could you send me some specific examples of how to do it? I'm going crazy and I don't really know what I'm doing anymore, I'm so confused :-) Thank you very much Martin, Czech Republic
@SmartHomeCircle 10 күн бұрын
If you are using the Google Generative AI assistant like gemini, then you can just configure it in the voice assist pipeline as the conversation agent. I have a video on the Atom Echo here: kzbin.info/www/bejne/hpDJYqqaaNurmKM Hope that helps.
@anandaramansivakumar2517 20 күн бұрын
This is an amazing tutorial, spot on!
@KingMaky 20 күн бұрын
Great video! One question - so there's no way to integrate with HomeKit without Google Home? In my case I only have Home Assistant & HomeKit so I'm not sure how to integrate it.
@SmartHomeCircle 19 күн бұрын
Homekit belongs to the apple ecosystem. It does not work with Google home.
@KingMaky Күн бұрын
@ Sorry I wasn’t clear - I meant, there’s no way to connect this to HomeKit through this add on without having Google Home?
@galdakaMusic 20 күн бұрын
Matter? 52€? No Thanks 😂😂
@SmartHomeCircle 17 күн бұрын
😄
@finereplicawatch 20 күн бұрын
nice project and thanks for shearing it with us. the response is VERY SLOW. Can you please share with us where you have installed the whisper and pipper? Can you please share you hardware specifications? The response of your installation is very fast comparing to my installaton
@SmartHomeCircle 17 күн бұрын
I am using an Intel i5 system with 12gb ram. Whisper requires something more powerful than a Raspberry Pi 5. Also I am using the small-int8 model which is accurate 95% of the time. I hope that helps.
@alfadex50 20 күн бұрын
will it be detected as a player in HA?
@SmartHomeCircle 19 күн бұрын
Check my recent video. You can update the yaml to use it as a player.