Пікірлер
@TheManInTheRing
@TheManInTheRing 4 сағат бұрын
Watched a lot of videos the last two days but I kept coming back to yours. I love the look, the reliability and low maintenance aspect. I love my factory wheels. You just hit all the important aspects. Thanks man
@katrenahunter1750
@katrenahunter1750 2 күн бұрын
This was very helpful! Thank you . I'll be trying this tomorrow. I'll come back and leave another review. Hopefully, I didn't do too much damage when I overfilled my mower with oil.
@backcountrybuilds
@backcountrybuilds 2 күн бұрын
@@katrenahunter1750 best of luck. Feel free to reach out with any questions.
@katrenahunter1750
@katrenahunter1750 2 күн бұрын
@backcountrybuilds will do! Thank You!
@evv4239
@evv4239 2 күн бұрын
I used to have mine straight piped but the tickets weren’t worth it😂 it’s a cool first car but I’m going to sell mine when I find a good deal on a newer Mustang hopefully
@jamescannon4917
@jamescannon4917 6 күн бұрын
I buy parts from Partzilla.
@jamescannon4917
@jamescannon4917 6 күн бұрын
I've got a 2002 I bought new an I figured out over the years it pays to use genuine Yamaha parts. They cost more but there worth it in the long run.
@backcountrybuilds
@backcountrybuilds 6 күн бұрын
@@jamescannon4917 that’s for sure. I learned that lesson with Hondas early on!
@barry8458
@barry8458 9 күн бұрын
Yup ..I agree….because you know you going to have to wrench it sooner than later…😳
@backcountrybuilds
@backcountrybuilds 9 күн бұрын
@@barry8458 oh yeah… check out my other video of it - carb clean, belt exploded, cracked exhaust, blown tire, etc Hahahha. Still a blast. Thanks for watching!
@barry8458
@barry8458 9 күн бұрын
@@backcountrybuilds …it’s all gud when u can wrench it yourself 👍🏼…BTW..I’ve bought a used Honda….all I can say is ..” lucky I can weld “….lol
@nickcentrone1679
@nickcentrone1679 10 күн бұрын
Buds, get a bench, I hate seeing people work off the floor. My back hurts just watching this. Lol
@backcountrybuilds
@backcountrybuilds 10 күн бұрын
@@nickcentrone1679 hahaha yes sir… I’ve got a big bench now! Thanks for watching.
@feltdoctor
@feltdoctor 10 күн бұрын
Nice machine but can am far superior
@backcountrybuilds
@backcountrybuilds 10 күн бұрын
@@feltdoctor gotta pay to play though. Do have to say I’ve never disliked a Can Am I’ve ridden hahaha. Thanks for watching!
@mikefrommaine8638
@mikefrommaine8638 9 күн бұрын
I've ridden a b force for the day , fun machine
@backcountrybuilds
@backcountrybuilds 9 күн бұрын
@@mikefrommaine8638 I rode one in Alaska a few years back and swore I’d own one. Definitely not disappointed!
@Rockcrawling101
@Rockcrawling101 11 күн бұрын
My brother has that four wheeler vin matching and even the redneck hitch
@YAJBEATSofficial
@YAJBEATSofficial 16 күн бұрын
What exhaust set up is that bro?
@backcountrybuilds
@backcountrybuilds 14 күн бұрын
Stock headers, no cats, true dual straight pipes to MBRP tips! Thanks for watching.
@Gkitchens1
@Gkitchens1 17 күн бұрын
My mustang came straight piped, and my neighbors don’t seem to mind but I constantly feel it’s just too loud for the people around me and that actively stops me from enjoying it. My wife absolutely loves it straight piped and is resisting me putting mufflers back on it but some times I really want to.
@backcountrybuilds
@backcountrybuilds 17 күн бұрын
@@Gkitchens1 I feel that. When I got my truck, I put a nasty Flowmaster muffler on it. After about 50k miles I ended up putting the stock exhaust back on for reasons you identified. Thanks for watching!
@user-david6265
@user-david6265 17 күн бұрын
And get a MSD distributor with spark plugs MSD
@backcountrybuilds
@backcountrybuilds 7 күн бұрын
Opted to go with Holley Terminator setup
@user-david6265
@user-david6265 17 күн бұрын
Please fix the timing 😢
@backcountrybuilds
@backcountrybuilds 14 күн бұрын
I’ll do you one better… ripped the junky 80s small block out and a 6.0L LQ4 is going in this place. Thanks for watching!
@pilocontreras9665
@pilocontreras9665 19 күн бұрын
Thanks for the information! I just ordered the part and will be watching this video again when replacing!
@backcountrybuilds
@backcountrybuilds 19 күн бұрын
@@pilocontreras9665 Made the video because I knew it would help at least one person, glad it did! Kind of a pain, so don’t hesitate to reach out if you have any questions
@phoenixarizona8441
@phoenixarizona8441 23 күн бұрын
Sell me the katana if you still have it
@backcountrybuilds
@backcountrybuilds 23 күн бұрын
@@phoenixarizona8441 I wish! Ended up moving across the US, and the bike stayed in the Midwest!
@ellybean5868
@ellybean5868 24 күн бұрын
0
@backcountrybuilds
@backcountrybuilds 20 күн бұрын
1
@savagesoldier9627
@savagesoldier9627 27 күн бұрын
Beautiful sound
@backcountrybuilds
@backcountrybuilds 20 күн бұрын
Thanks for admiring! It makes me smile…
@brutis5727
@brutis5727 27 күн бұрын
331 stroker ford?
@backcountrybuilds
@backcountrybuilds 25 күн бұрын
Small block Chev
@victorortega2718
@victorortega2718 29 күн бұрын
You got the tick yet ?
@backcountrybuilds
@backcountrybuilds 28 күн бұрын
@@victorortega2718 oh yeah. She joined the party around 80k miles… hahahaha. Thanks for watching.
@victorortega2718
@victorortega2718 28 күн бұрын
@backcountrybuilds damn man hate to hear it I had exhaust leak fix it ... but now I keep hearing a tick I think maybe lifters now you ever fix it ?
@backcountrybuilds
@backcountrybuilds 28 күн бұрын
@@victorortega2718 this is the second 5.7 Hemi I’ve owned and the last one had the same issue. Exhaust headers bolts prone to snapping off inside the block. Same thing happened to this truck! Not urgent but definitely annoying hahaha
@victorortega2718
@victorortega2718 28 күн бұрын
@backcountrybuilds yeah man I love the truck but dammit 😫 lol
@fredberger2451
@fredberger2451 29 күн бұрын
Very nice, my brother in Law had one, was alot of fun
@akgamer8466
@akgamer8466 Ай бұрын
Picked up one of them myself. Got an 09 m8 hcr. Glad to see they rip good
@backcountrybuilds
@backcountrybuilds Ай бұрын
@@akgamer8466 oh hell yeah. Have fun and ride safe
@Gilbertajallecruz
@Gilbertajallecruz Ай бұрын
Such a BEAUTIFUL car!!!🫡
@backcountrybuilds
@backcountrybuilds Ай бұрын
Thanks for watching!
@rentonwright2441
@rentonwright2441 Ай бұрын
Nice s197👍
@backcountrybuilds
@backcountrybuilds Ай бұрын
Thanks man. She’s a 50 footer for sure, but definitely fun haha
@taylorsampson5434
@taylorsampson5434 Ай бұрын
Got a 2017 Ram 1500 3.6 V6 with 33k miles (was trying to get out of a car with a lot of problems) what kind of lift do you recommend to fit on 35s? (I’m new to this)
@backcountrybuilds
@backcountrybuilds Ай бұрын
A lot of guys are running Rough Country. Word on the street is they’re increasing quality recently but are still on the cheaper side if I’m not mistaken. Obviously I went with the Fabtech kit which is kinda bougee up there with BDS and all that. Depends on what you’re looking to do with it, but I’ve had really good luck quality wise with mine… but I sure paid for it hahaha. Best of luck, man!
@taylorsampson5434
@taylorsampson5434 Ай бұрын
@@backcountrybuilds ya. I want to put 35s on it but I’m not sure what the right tires are for my truck just yet and how to know what I should choose
@backcountrybuilds
@backcountrybuilds Ай бұрын
@@taylorsampson5434 what a lot of guys do, including me, is when you’re first starting out instead of going for the big lift kit right of the hit, try out a leveling kit. Rough country sells a pretty inexpensive 2.5” or 2.0” leveling kit, which will allow you to fit 33s and have them look right. I know you said you’re looking for 35s, which I’d be the first guy to tell you to go for it, but maybe especially with the V6 it wouldn’t be a bad idea to get some additional clearance for 33s with the leveling kit, try out some nice 33x12.5xR20s and you won’t hate yourself trying to move some heavy 35s with the V6. Then down the road if you want to go bigger, you can upgrade from there. A lot of people sell their used 33s on marketplace and Craigslist too. I think it’d be worth it because it’s safest to buy new tires, but here’s some good brands: Nitto, BFGoodrich, Toyo, Goodyear. Also check out customoffsets website, you should be able to put your truck into their website and see what it would look like with different wheel/tire combos. Hope this helps!
@WiseUpRiseUp42
@WiseUpRiseUp42 Ай бұрын
I got a 2013 Premium 5.0 for 18,000$ with 100,000 miles one of my dream cars 😍
@backcountrybuilds
@backcountrybuilds Ай бұрын
What an absolute steal. The 4.6L kept me out of trouble… what color did you end up with?
@MannJaso
@MannJaso Ай бұрын
Nice dude.. I got my 2011 gt/cs I think i was 16,600 with 86k miles love the car to death but man I miss the hell out my 07 gt I had that got totaled 2 years ago
@backcountrybuilds
@backcountrybuilds Ай бұрын
@@MannJaso sorry to hear that man. Sounds like quite the upgrade though!
@Stevegotit
@Stevegotit Ай бұрын
Mustangs are the noise makers of the car world. Nice little car though
@backcountrybuilds
@backcountrybuilds Ай бұрын
Thanks! Definitely trouble…
@WiseUpRiseUp42
@WiseUpRiseUp42 Ай бұрын
I got a 2013 5.0 noise and I’ll take you to grapple bees
@RamzyTheDad
@RamzyTheDad Ай бұрын
Sounds and looks so good
@backcountrybuilds
@backcountrybuilds Ай бұрын
Thanks man
@RamzyTheDad
@RamzyTheDad Ай бұрын
@@backcountrybuilds hang on you only paid $12,500 for this? WHAT?!
@Lost_C7
@Lost_C7 Ай бұрын
Clean bro!! I’m trying to pick up a c6 this year just looking for that perfect one to pull the trigger
@backcountrybuilds
@backcountrybuilds Ай бұрын
Be patient! Love me a C6… my mom actually has a C5 since I was a kid hahaa. I usually buy cars/Jeeps in stock form and put a ton of money into making them my own… turned out this GT CS was a turnkey version of the setup I was looking for. Best of luck!
@Lost_C7
@Lost_C7 Ай бұрын
@@backcountrybuilds oh snap a diamond in the ruff good find brother🤙🏻
@tjporras526
@tjporras526 Ай бұрын
How is maintenance and reliability?
@backcountrybuilds
@backcountrybuilds Ай бұрын
Maintenance is not bad. Annoying to get the jack under a lowered car… gotta drive it up on blocks. Other than that, it’s like working on a loud Crown Vic.
@PioneerMuzik
@PioneerMuzik Ай бұрын
🔥🔥
@monarchrescue4356
@monarchrescue4356 Ай бұрын
Sound is AMAZING 😮😮😮
@backcountrybuilds
@backcountrybuilds Ай бұрын
I agree. Thanks for watching!
@jessjoshwyatt3571
@jessjoshwyatt3571 Ай бұрын
Lmao that's the exact amount i spent on my supercharged 2007 mustang gt-cs!
@backcountrybuilds
@backcountrybuilds Ай бұрын
Daaaaang. How many miles?
@forcedtomakeanaccount7628
@forcedtomakeanaccount7628 Ай бұрын
Clean set up, sounds nice
@backcountrybuilds
@backcountrybuilds Ай бұрын
Thanks!
@Shooobe
@Shooobe Ай бұрын
Great video! I recently picked up a 2000 RM125 and I am definitely running rich. Lots of spooge. I am trying to lean it out and was wondering if loosening my air screw would help? Loosening it more would bring more air to my knowledge but was trying to see how much to loosen it? I'm in the midwest and it's been quite hot this summer. Any recommendations on number of turns?
@backcountrybuilds
@backcountrybuilds Ай бұрын
Hi, thanks for watching. Glad you enjoyed! I’d first try doing some research on injection oil ratios. I’ve always run 32:1, which is pretty rich, but I’d rather have some spooge than a smoked engine! Best of luck.
@Shooobe
@Shooobe Ай бұрын
@@backcountrybuilds I run Amsoil Dominator at 32:1! Bottle recommendation is 50:1 while Suzuki recommends 32:1. Maybe less oil would help spooge?
@backcountrybuilds
@backcountrybuilds Ай бұрын
@@Shooobe it’s a 2smoker, let her spooge!
@Shooobe
@Shooobe Ай бұрын
@@backcountrybuilds you’re right lol. I’ll stop worrying about it. Thanks for the help!
@juantristan_la_muerte
@juantristan_la_muerte Ай бұрын
Love it when you cover the speed
@backcountrybuilds
@backcountrybuilds Ай бұрын
No speeding on this channel. That would be illegal. Thanks for watching!
@MrLyniek
@MrLyniek Ай бұрын
Hej, what kind of exhaust muffler is this, it's sounds great 😮
@backcountrybuilds
@backcountrybuilds Ай бұрын
Vance & Hines 1 into 2. Thanks for watching!
@jimstansbury6013
@jimstansbury6013 Ай бұрын
It would be worth more to go back stock
@backcountrybuilds
@backcountrybuilds Ай бұрын
Not shopping for resale value! This project isn’t a flip by any means. Thanks for watching!
@jimstansbury6013
@jimstansbury6013 Ай бұрын
@@backcountrybuilds being a 138 car if you go back stock even without the original engine you would be able to recoup and money you spent and a fair amount of the labor. If it was a 69 year car then that would be a different story. Anyway have fun
@clarkd2742
@clarkd2742 Ай бұрын
Good clear explanation, thank you.
@backcountrybuilds
@backcountrybuilds Ай бұрын
Thanks for watching!
@LakeishaMorrow
@LakeishaMorrow Ай бұрын
I wonder if this is whats going on with my moms jeep. Runs like shit around 1k to 2/5 then once you step on it a little more it will smooth out till it sputters again just replaced a throttle sensor did nothing. now im leaning towards some kind of fuel issue, but now im thinking its just misfiring like a mf lol.
@backcountrybuilds
@backcountrybuilds Ай бұрын
You might be right. How many miles on her? It was definitely worth the spark plugs and coil pack for peace of mind, too. Some guys say the injectors go bad at a certain mileage. Best of luck!
@LakeishaMorrow
@LakeishaMorrow Ай бұрын
@@backcountrybuildsJust over 240k lol
@backcountrybuilds
@backcountrybuilds Ай бұрын
@@LakeishaMorrow brandy new hahaha
@LakeishaMorrow
@LakeishaMorrow Ай бұрын
@@backcountrybuilds oh yeah lol. That's what's got me pissed she actually runs like a top for a bout 3 minutes when you first start it up then it will feel almost like the tran slips and it will run real rough and won't accelerate right it just jerks till you give her some more and we'll I already said all that lol
@markhill8276
@markhill8276 Ай бұрын
Quick question if you have time, i have a Big Bear 400 4v4 2007, just trying to find where the "neutral" wire plugs in because my neutral light at times is difficult to come on and i think that might be a connection issue.
@markhill8276
@markhill8276 Ай бұрын
love your video
@backcountrybuilds
@backcountrybuilds Ай бұрын
Thanks for watching! Glad you enjoyed.
@iRemainNameless
@iRemainNameless Ай бұрын
Looks great. I am getting my 2015 1500 lifted 6" this week and like your choice of tires and rims. What tires and rims are you using? All of this is so new to me, it's like learning a new language. At exactly 6:32. Those are 35's? Can you tell me what tires/rim size/name, any offset numbers and anything else I'd need to have that set up of tires and rims? I appreciate this. Thank you again.
@backcountrybuilds
@backcountrybuilds Ай бұрын
6:32 those are 35x12.5xR20 Firestone Destination MTs. I’ve had three different tires on this truck since I bought it. First was Nitto Trail Grapplers, then Firestone Destination (couldn’t get the Trail Grapplers because of COVID), now I’ve got Nitto Ridge Grapplers. The Trail Grapplers are my favorite. They look and perform the best and last the longest but are far more expensive. Good luck with the install! My rims are factory Ram wheels from a black 2017 Tradesman. I have to run at least a 0.25” wheel shim to clear the wheels. I have opted to run 1.5” hub-centric wheel spacers to give it the stance/look I like. Hope this helps.
@iRemainNameless
@iRemainNameless Ай бұрын
@@backcountrybuilds Perfect. I rewatched the video and wrote down all of that. I missed the tires thank you for telling me what they are. I am gonna look for the Grapplers. That you show side and front back profiles of the truck helps. It’s perfect. Thank you again. I appreciate your reply. I remember watching your video when I first bought my truck 6 months ago wondering about lifting, and now I’m deleting the air suspension and lifting your video came up first again. You helped me greatly with your info in the video. I’ll link a video when it’s complete to show the result. Cheers 🤝
@John_439
@John_439 Ай бұрын
Love this video just got basically this exact same truck.
@backcountrybuilds
@backcountrybuilds 28 күн бұрын
Thanks for watching! Glad you enjoyed. Best of luck with the new truck!
@angeloc4722
@angeloc4722 Ай бұрын
Runs really good
@backcountrybuilds
@backcountrybuilds 28 күн бұрын
Thanks! Not bad for a Chinese knockoff carb, right?
@jorgerobles2443
@jorgerobles2443 Ай бұрын
Just looking at your build scares me. I just acquired a 1970 Chevy Chevelle Malibu. From the first and only Owner, she got it as a graduation present and handed it down to me now I’m really scared to even just take one bolt off from looking at your video because it’s been sitting for the last 30 years
@backcountrybuilds
@backcountrybuilds Ай бұрын
Haha you’ll be fine! PB blaster…
@ragingbull1267
@ragingbull1267 Ай бұрын
Let it smoke, keeps mosquitoes away !
@backcountrybuilds
@backcountrybuilds 28 күн бұрын
Hahaha not a bad point! Thanks for watching.
@KarlsBerg87
@KarlsBerg87 Ай бұрын
this happened to me, i Overfilled to the max, the oil was foaming and white smoking, also the filter for the air entry and the filter was pouring oil out, filter was full of oil, and now that i empty it, is no smell of gasoline in the oil removed, but now the exhaust pipe is leaking black oil when on.
@backcountrybuilds
@backcountrybuilds Ай бұрын
Ok, sounds like if you follow this video you should be in good shape! First step, fill the oil to the proper level (safe line). Don’t be afraid to double check it! Make sure the mower is on a level surface. Also if you just ran the mower, wait a few minutes to let the oil seep back to give you a true reading of the oil level. Remove your air filter, since it’s likely oil clogged like you said! There’s a tube (PCV valve) that dumps excess oil back into the filter housing. It’s worth the $10 for a new air filter! Then, since it was overfilled, it likely clogged the spark plug with oil. Remove the spark plug, pull the pullcord until no more oil comes out. Then put in a new spark plug. Once you’ve got the oil clogged filter removed, oil to the correct safe zone level, oil out of the spark plug hole, and a fresh/clean spark plug, fire it up! It’ll probably smoke until the excess oil burns off, but after a few minutes you should be back in business and the smoke should stop. Once the smoke stops, let it sit for a couple minutes and recheck the oil level! Best of luck.
@KarlsBerg87
@KarlsBerg87 Ай бұрын
@@backcountrybuilds thanks I'll buy the spark plug today, but what to do with the black oil that appear to be burning inside in the piston, that black come from exhaust pipe
@backcountrybuilds
@backcountrybuilds Ай бұрын
@@KarlsBerg87 it’s likely excess oil that made its way from the crankcase into the combustion chamber. With any luck after the oil is at the correct level, the heat of the motor should burn the excess oil out of the combustion chamber and the smoke should stop.
@Titanic19127
@Titanic19127 Ай бұрын
So? You put back the stock lights? Or stock looking?
@backcountrybuilds
@backcountrybuilds Ай бұрын
Stock looking! Smoked lenses.
@Diego-gs3gq
@Diego-gs3gq 2 ай бұрын
Year of plastics?
@backcountrybuilds
@backcountrybuilds Ай бұрын
I believe they’re off the 09 as well!
@fredberger2451
@fredberger2451 2 ай бұрын
I hear ya on the crotch rockets , lots of fun but scary as hell if you’re not careful, just a matter of when ya fall off lol, great seeing you’re doing good bud. Nice country side your at very cool.
@backcountrybuilds
@backcountrybuilds 2 ай бұрын
That’s for sure. As always, thanks for watching. Definitely a beautiful spot to be at! Have a great day.