Can't wait to get mine! So excited about this one!
@robertsegura6451Ай бұрын
Sold! I'll be ordering one as soon as possible, the magnets were what cinched the deal.
@elementdriven6382Ай бұрын
Awesome! That’s what sold us on it too. FYI, we’re having our first ever sale this weekend so you can save a few bucks.
@brianthompson9241Ай бұрын
That is a great looking bag!
@elementdriven6382Ай бұрын
Thanks Brian!
@TheMarialm66Ай бұрын
Great info thank you!!!
@runuphillАй бұрын
What I will never understand is how the wind / highway speeds can rip these mouldings clear off the Element. 😑
@elementdriven6382Ай бұрын
Usually it’s a combo (in my opinion) of improperly mounted trim (glued on after fasteners/trim tabs get broken) and the lack of slope on our windshields. The air is looking for the quickest escape once hitting the windshield at decent speeds so additional airflow is forced to the sides of the glass versus over the top.
@youmebornfree2 ай бұрын
Honda has some great engineering but this has to be one of the dumbest designs they have ever come up with.
@elementdriven6382Ай бұрын
Honda engineering is impressive, but typically it’s the trim getting reinstalled improperly that, I believe, causes the trim to go into fling mode.
@Michael-ep9jd5 ай бұрын
Hey man do yall have a install video
@elementdriven6382Ай бұрын
Hi. Sorry on the late reply. We currently do not have an install video for the Ghost Key kit.
@scottfree70285 ай бұрын
Over-engineering at its finest.. two clip system is bad enough! But 3?!? Wtf!!?? 💪🏼 👏 👏 Nice Job sir! Your patience outweighs the strength of these plastic clips for sure!👍🏻
@MOOMOO27286 ай бұрын
What is this called? Rear hatch plastic panel and screws
@elementdriven63826 ай бұрын
The product is a hatch release kit. Are you referring to the name of the large plastic panel?
@dougblum24726 ай бұрын
Great video, helpful. Suggestion- zoom out some!
@Thomas-sc2pf7 ай бұрын
Hi Nick, thanks for this video. My original honda element key is apparently very worn and has started having issues inserting into the ignition. Honda in Seattle quoted $320 + tax. BUT they dont guarantee that it is just a key issue and not an ignition issue, which will be much more expensive and then need to rekey the locks on the doors. I'm wondering how much this push to start kit would run to have it installed at Gresham Honda? Seems like that may be the way for me to go if it is affordable relative to the ignition/rekey replacements. Thanks in advance!
@elementdriven63826 ай бұрын
Jeff from ElementDriven. In my experience, it’s the ignition switch that commonly fails and not the key being worn. The push-to-start kit is a good alternative from having you not be able to turn the key in the ignition at some point. You can contact Gresham Honda and ask to have Nick do the install. Here’s the link to the kits we offer: elementdriven.com/products/ghost-key-plug-and-play-push-to-start-conversion-kit?_pos=1&_psq=push&_ss=e&_v=1.0
@simonoutdoors49697 ай бұрын
Need a video on how to install the light bar mount kit before i commit to buying it. I cant really tell what modifications need to be done to this pillar and how it is installed
@elementdriven63826 ай бұрын
If you’d like to contact me through our site, I can send you the instructions. elementdriven.com/pages/contact-us It involves drilling ink your A-pillar to mount the brackets. I run a SportERack and have my light bar mounted to it. No drilling. elementdriven.com/products/diode-dynamics-stage-series-led-18-30-42-inch-light-bars?_pos=2&_psq=light+bar&_ss=e&_v=1.0
@JonWuClimbs8 ай бұрын
Is it possible to lock yourself out if you exit theough the rear hatch?
@elementdriven63828 ай бұрын
When in doubt, always take your keys with you. But you should be fine since you exited from it unlocked, unless your auto-lock activates. You do have to hit unlock on your fob to open the rear hatch from inside.
@JonWuClimbs8 ай бұрын
@@elementdriven6382 That makes sense. I wasn't sure if you have to unlock with the fob before you can use your mechanism to open the hatch. Thanks!
@karylclaroni22889 ай бұрын
Best how to video ever. Especially for such a complicated task. Thank you so much!
@elementdriven63829 ай бұрын
Thank you and appreciate the positive comments.
@cindymcdevitt95210 ай бұрын
Thank you for the detailed description. I have had to replace mine numerous times and it was a nightmare. When Safelite came in and replaced my windshield they just ripped them off . I screamed and they were like,”they get old and brittle”. They were brand new pillars. I was ticked. Ordered new ones and wanted to find a good video for installation and removal. You did a great job. Glad I waited to install them.
@elementdriven638210 ай бұрын
We’re glad the video helped and that we could provide assistance in making sure your trim stays on.
@JayJay-tz3dg10 ай бұрын
Installed mine on 06 Honda element. Won’t start. What wire was used at brake pedal? I get a green key illuminated and won’t start
@DoubleSmackJacksSmackAttack11 ай бұрын
I've noticed with every junkyard E I come across that both sides of the A pillar trim are missing, this would explain why. I'll have to pull a spare set for myself just in case of an emergency next time I find them in good shape (or at all!)
@giselleplantbasedvegan9174 Жыл бұрын
I’m looking to replace the upper rubber trim of the windshield, it has loosened. I also noticed the top roof trim that meets the windshield on the side seems loose. I wonder if I need a clip for that. Would you have a suggestion for where I can get the rubber trim? I found some that was $30 but they wanted $70 for shipping.
@elementdriven6382 Жыл бұрын
If the upper rubber windshield trim has loosened, you may be able to reinsert it. Otherwise, see what the Honda part number is and search best cost with realistic shipping for that part number. Another option is to stop by a glass shop to see if they can help. If you’ve had your windshield replaced recently, then I’d suggest you hit up that shop up for the fix.
@lance7989 Жыл бұрын
❤THANK YOU SIR!!!!! YOU ARE A LIFE SAVER!!!!!!!
@elementdriven6382 Жыл бұрын
You’re very welcome. Glad you found it useful.
@beesang1906 Жыл бұрын
Thanks so much. The clips are outrageously expensive so I appreciate the glue bandaid. I had the top and bottom clips intact, and they snapped right on. The rest are attached by the adhesive (which in Summer 2003, was $3-something a tube at Wally, $7+ at auto parts store!). Will hit the junkyards later and try for both trim sides (or ask for new for Christmas… and birthday!). Thanks again!
@elementdriven6382 Жыл бұрын
Glad we were able to help some and appreciate the feedback.
@motorjed Жыл бұрын
Thank you for this - super useful, replacing mine today 👍
@robothead1024 Жыл бұрын
amazing video!
@tomsweeney8433 Жыл бұрын
Are you selling those
@rebeccaromine5170 Жыл бұрын
This is a very fine video, Dave would have never figured out the clips! Thanks you so much for the post GREAT
@elementdriven6382 Жыл бұрын
Who’s Dave? And glad we can help!
@cliffords.8341 Жыл бұрын
@@elementdriven6382 Dave's not here! 🤣
@branscoset Жыл бұрын
yas
@MichaelThurman-JNX Жыл бұрын
For those who have lost their trim to the wind... just wanted to share that if you buy the replacement trim new from Honda, it includes all the clips.
@elementdriven6382 Жыл бұрын
Correct, but it includes only the white clips not the gray or green units.
@martinelantraratedn Жыл бұрын
OK and how to reinstall it?
@branscoset Жыл бұрын
framing hammer and self tapping screws.
@elementdriven6382 Жыл бұрын
Check our channel for the install video, plus I’ll add the link in the description too.
@brianthompson9241 Жыл бұрын
Thank you! Sounds like it’s a good idea to have a few spare parts handy anytime we touch our aging plastics.
@elementdriven6382 Жыл бұрын
It wouldn’t hurt.
@brianthompson9241 Жыл бұрын
Pretty cool! Now, how about a remote start option?
@elementdriven6382 Жыл бұрын
Not with this kit and working out of the box, I’m afraid. But there’s probably people out there can that could figure it out.
@spacecaptain9188 Жыл бұрын
How do you reconnect the exterior door release? It looks like you can only open it from the inside, now?
@elementdriven6382 Жыл бұрын
The exterior door release cable is only temporarily disconnected to slide on our cable. It gets reconnected so you have both interior and exterior access.
@humertonoriega6462 Жыл бұрын
Saludos desde Tijuana México 👍🏻🇲🇽 Cuánto cuesta? Dónde lo puedo comprar?
@elementdriven6382 Жыл бұрын
Gracias. They are on sale this month (February). Here’s the link: elementdriven.com/collections/anniversary
@pnw_element9822 Жыл бұрын
Awesome 👏
@BK-gh9us Жыл бұрын
Thanks for showing this... KZbin is good for virtually any question you could possibly think of.
@elementdriven6382 Жыл бұрын
You’re welcome. YT is turning into the go-to place for quick education on DIY and how-to info.
@brianthompson9241 Жыл бұрын
Would that fit if the rear seats are installed? And upright?
@elementdriven6382 Жыл бұрын
Yes. You just wouldn’t be able to flip-up the table with the seats up. I tried to design it for a variety of uses/formats and for those who like to keep their rear seats in.
@ReadySetElement Жыл бұрын
@ElementDriven thank you I feel like this product is designed for me 🙏 Can't wait to order one 🙌
@flyingdiscproductions Жыл бұрын
do you have a link to the drawings?
@elementdriven6382 Жыл бұрын
Are you referring to the written instructions? They can be found in our Glovebox section on our site, here: elementdriven.com/pages/elementdriven-rear-hatch-latch-release-kit-install-instructions
@tubertots Жыл бұрын
Hello, I ordered the "WindshieldTrimKit by RobDeezy" from the ElementDriven website, and there are no instructions for installation, or a video that I can find here on your KZbin Channel. Any help here?
@elementdriven6382 Жыл бұрын
Hi. Thanks for your order. I sent the instructions your way. Cheers
@tubertots Жыл бұрын
@ElementDriven I got.them, Thank you!
@NinthElement Жыл бұрын
These are so amazing! If I did not have my floor covered up, I would so use these. Good product. Cheers!
@elementdriven6382 Жыл бұрын
Thanks! Glad you like ‘em. If you ever get another Element…;-)
@brianthompson92412 жыл бұрын
Thank you Jeff!
@elementdriven63822 жыл бұрын
Happy to share, Brian.
@ReadySetElement2 жыл бұрын
I have this and it's awesome. Just updated my car with the window shelfs made a video on our channel 🤙
@petepete69122 жыл бұрын
All you need is some heavy duty nylon string and a button. Tie one end of the nylon string through the loop in the latch above the o. e. cable and run it toward the driver' side.. Punch a tiny hole through the plastic door panel in any convenient spot. Run the other end through that hole, leaving some slack hanging toward the interior. Replace the panel and pull on the string. The latch will open, and spring back. Finally, tie the button to the string, taking up enough slack so the button pulls against the interior panel. The only tools required are a pair of scissors to cut the string and an awl to punch a hole in the plastic. I even found a 1 inch diameter gray plastic button to match the interior!
@sebastiankarrethdemiguel5167 Жыл бұрын
what kind of button do you have in mind?
@petepete3389 Жыл бұрын
@@sebastiankarrethdemiguel5167 I used a gray two hole coat button about 1 inch in diameter
@JamesJones-vt3jt2 жыл бұрын
Where can I get that from my Honda Element I got 2007
@elementdriven6382 Жыл бұрын
elementdriven.com/products/rear-hatch-release-kit
@pricklypearradio92762 жыл бұрын
This was so easy to install!!! So happy to have added this to my Green Bean!!! So fun! Thank you!
@elementdriven63822 жыл бұрын
So happy to hear how easy it was for you! Thanks for letting us know and hope you have a great year with your E!
@pricklypearradio92762 жыл бұрын
Can’t wait to order one! New to the Element family!!!
@elementdriven63822 жыл бұрын
Congrats on joining the E family! Let us know how we can help make it all that you want it to be.