Brian Reynolds

Пікірлер

@Pizza-xi3fs 27 күн бұрын

how fast

@brianreynolds4153 13 күн бұрын

I haven’t tested that yet. I will come back and comment the speed when I test

@bass_and_bass3323 Ай бұрын

Need to change up all the connectors and upgrade the all the wiring ...even comming off the battery's..those battery's would work but im shure the have a built in bms ..you could upgrade to a charger with a built-in bms a ditch the ones in the battery's.. to keep it to true shed built form just make it work😅 would make good content too ...keep up the good work

@zavenador9781 Ай бұрын

i think you should call it the "Workshed"

@brianreynolds4153 29 күн бұрын

I love it. Workshed it is

@stubby7934 2 ай бұрын

Carb is meant to have air drawn through it, not pushed through it...if you want it to work properly, it should be before the turbo rather than after it. Of course, if you're not making boost, then it probably wont matter much beyond messing with the A/F richness. Go have a look at Cars & Camera's turbo setups on their carts, if you need more details.

@brianreynolds4153 Ай бұрын

It’s always a work-in-progress. I will definitely check out some more videos for inspiration.👍🏻

@marcosfachini5246 2 ай бұрын

Keep it up 💯

@marcosfachini5246 2 ай бұрын

The mixture gets poor when u rev it, that may be bc the turbo is doing some pressure and that's pushing back the fuel in the carb

@Harpeia 2 ай бұрын

A valiant attempt :)

@brianreynolds4153 2 ай бұрын

I’ll get it working one of these days

@therealbikerz 2 ай бұрын

Hello there. How are you? Would it be okay if I featured this clip in my next episode. Full credits + notification. Thank you so much in advance!

@brianreynolds4153 2 ай бұрын

Yes, that’s fine with me

@therealbikerz 2 ай бұрын

@@brianreynolds4153 thanks!

@therealbikerz 2 ай бұрын

Hey there. Itt's me again, sorry for the possible delay and any mistakes. I've used it in my latest episode. Feel free to check it out, thanks!

@alainfrancois5302 3 ай бұрын

The video lacks the details that I'm looking for, but do you use the upper rubber bushing on the rear coil over installation?

@brianreynolds4153 3 ай бұрын

Yes you use the bushing! You’ll have to use something to wedge it in since it is tight.

@GeorgeGardner-n7w 3 ай бұрын

What did you use to get the bushing in to the adjuster?

@brianreynolds4153 3 ай бұрын

I used a 2 foot pry bar

@saravess6910 4 ай бұрын

Hey I know that place! It’s my house! ❤

@jakerook6248 5 ай бұрын

I run a 17/42 on my bar Raven, and it seems like the ideal setup. Comfortable at 55-60, and still enough torque to top out 5th. Top speed now at 75 mph when pinned 😁

@brianreynolds4153 5 ай бұрын

I’ve swapped back and forth from 17/42 and the 38. Depending on where I need to go. I have the 450ss for the longer rides now

@jakerook6248 5 ай бұрын

@@brianreynolds4153 nice 👍 I wanna get a kpx 259 for my next bike and turn it into a sumo for the longer rides. I wish I could do it with a klx or a CRF, but I'm too poor to afford a new one like I can with the lifan being half the price 😅😅

@ayrabface7226 6 ай бұрын

I have a headache from ur camera

@brianreynolds4153 5 ай бұрын

I need to get a helmet mic. Work in progress

@Harpeia 6 ай бұрын

Thanks youtube for randomly suggesting more vids of my favourite thing in the world :'D Although, most work on the 450ss/sr I've seen so far is exhaust switching. Am I the only one that likes the stock exhaust sound more than anything else? Sure it's ugly and bulky and heavy but I genuinely like it more than anything else so far.

@brianreynolds4153 4 ай бұрын

Nothing is wrong with liking the stock exhaust

@mannygotdahits6534 7 ай бұрын

BRO COVER THAT LICENSE PLATE BRODIE!

@mannygotdahits6534 7 ай бұрын

atleast for youtube videos

@brianreynolds4153 3 ай бұрын

I thought about that after posting it but my plate is different now. Just went and got a new one in case lol

@airgunbubba2505 7 ай бұрын

I like the unique camera angle. Reminds me of Midnight Club :) How do you like the 450SS? I went into to purchase one 2 weeks ago but rode out on a 2023 CLX 700 sport. Basically same price as the 450ss as i got last years model. I love it. Kudos on the great content, keep up the good work.

@RobertHiggins-gv5jc 7 ай бұрын

Looking good 👍.... let's see some Pop offs.....

@PapiDimple 7 ай бұрын

How do the cams work

@brianreynolds4153 7 ай бұрын

What do you mean by cams

@rhyme4637 7 ай бұрын

@@brianreynolds4153 he probably meant the dash cams in the front&back of the bike

@brianreynolds4153 7 ай бұрын

It’s a KENWOOD motorcycle camera and you have to wire the power and ground(my power is spliced into the tag light) and run the camera wires. It comes with an app and you can save video on the app. It does not allow “download to phone” but has an SD card you can pull out and take videos off of

@brianreynolds4153 8 ай бұрын

Exhaust Mod: www.ebay.com/itm/166511773759?mkevt=1&mkpid=2&emsid=e90001.m164960.l179213&plmtId=700008&mesgId=3037&mkcid=8&ch=osgood&bu=45543253118&trkId=5be0a628-c03e-3a97-9c88-a43642a0621c&cnvId=700003&recoId=166511773759&recoPos=1 Tidy tail: a.co/d/et62D7Z Tidy tail: a.co/d/et62D7Z Camera: KENWOOD STZ-RF200WD Motorsports... www.amazon.com/dp/B09JZW2HW1?ref=ppx_pop_mob_ap_share

@judge831 8 ай бұрын

Sounds amazing

@rogerurbanek1564 8 ай бұрын

I just started riding yesterday. How do you get your shifting to be so smooth? Are you just skipping the clutch when at certain times?

@judge831 8 ай бұрын

For my bike, I preload the shifter and pull the clutch level just enough to make the shifter engage easily

@rogerurbanek1564 8 ай бұрын

@@judge831 I’ll give it a try. Thanks.

@brianreynolds4153 8 ай бұрын

I feel like it’s hard to shift clutchless. Kinda like something engages when you don’t have the clutch pulled. I haven’t skipped the clutch yet.

@dirtbikelunatic 8 ай бұрын

Hello! Would it be okay to use it in compilations and maybe on some of ours Social Networks? You will get full credit for it. Thanks

@brianreynolds4153 8 ай бұрын

You’re more than welcome to!!

@dirtbikelunatic 2 ай бұрын

@@brianreynolds4153 Thanks a lot :)

@StreetMotoZ 8 ай бұрын

The truck driver was on the phone. lol! They are everywhere! Way to keep your speed in check and aware of your surroundings!

@brianreynolds4153 8 ай бұрын

Thank you, I appreciate that. Pretty new to riding so I’m glad I didn’t panic brake

@StreetMotoZ 8 ай бұрын

@@brianreynolds4153 You did awesome. It is good to do some quick stop practice to get the muscle memory in place. You may already know this but just saying in case.

@TheTrueHonoredOne 8 ай бұрын

Guys like that kill us bikers! Glad you were not speeding and were aware!

@brianreynolds4153 8 ай бұрын

I just got done telling a coworker that I’m glad I wanted going fast around those corners. God was on my side for this one

@jlselby231 8 ай бұрын

Would you post PNs of things your using? Im specifically interested in the tail tidy and cam

@brianreynolds4153 8 ай бұрын

Thank you for reminding me to put links on this video! Dashcam is KENWOOD STZ-RF200WD Motorsports... www.amazon.com/dp/B09JZW2HW1?ref=ppx_pop_mob_ap_share

@brianreynolds4153 8 ай бұрын

Tidy tail: For CF-MOTO 450SR SR 450SS 450SRS... www.amazon.com/dp/B0CWDH5345?ref=ppx_pop_mob_ap_share

@moto-stars 8 ай бұрын

Hey! May I use this video in my new episode? Watermarked and linked to your channel ofc

@brianreynolds4153 8 ай бұрын

Yes sir!!

@moto-stars 8 ай бұрын

@@brianreynolds4153 Thank you!

@Tim-turbo-o 8 ай бұрын

be safe. Your riding environment is very scenic.

@brianreynolds4153 8 ай бұрын

Gotta ride like everyone is out to kill me. I do enjoy the country roads in my area!

@JessicaSimonson1976 8 ай бұрын

I plan every shift at 6000 on tach.

@MotoMedicine904 8 ай бұрын

The silencer goes between the muffler and the link pipe. Undo the springs and take the muffler off then drop that silencer into the muffler at the hole that meets the link pipe and then put the muffler back on. The difference in size will hold it in the pipe

@brianreynolds4153 8 ай бұрын

It just seemed to wiggle in that spot so I assumed it wasn’t where it goes. Ended up using the tighter springs and it worked. Thank you!

@BasedFK 8 ай бұрын

keep the vids poppin homie

@MasonWood-s5c 8 ай бұрын

New edition to your channel... that only has 26 subscribers!! LOL Is that even considered a channel?

@BasedFK 8 ай бұрын

get a life

@nicholas1116 8 ай бұрын

A channel is a channel man, no need to be a rude sack of shit to a nice dude talking about his bike.

@MasonWood-s5c 8 ай бұрын

@@BasedFK Thank you for taking time out of your exciting life to read the boring comments, then feel the need to fire off. LOL

@brianreynolds4153 8 ай бұрын

Just a place to post the thing I do. Thank for watching!

@ImBransolo 8 ай бұрын

Get yourself a little dead blow hammer or rubber mallet 😂

@Noah_mcclish 10 ай бұрын

This helps a lot

@brianreynolds4153 9 ай бұрын

Very glad to hear that!

@gumpy313 10 ай бұрын

did the rear shock bolt give you any trouble trying to put it in?

@brianreynolds4153 9 ай бұрын

It did! I ended up using the jack to lift up on the suspension to line up the bolt

@mr.somebody1493 11 ай бұрын

Where did you get the sprocket ?

@brianreynolds4153 9 ай бұрын

Here are all the Amazon links for the sprockets I have bought: JT Sprockets JTR269.35 35T Steel... www.amazon.com/dp/B000GTV5U4?ref=ppx_pop_mob_ap_share JT Sprockets JTR269.42 42T Steel... www.amazon.com/dp/B0068O5N5Y?ref=ppx_pop_mob_ap_share JT Sprockets JTF259.17 17T Steel... www.amazon.com/dp/B004DNA0KA?ref=ppx_pop_mob_ap_share

@mr.somebody1493 9 ай бұрын

Thanks. @@brianreynolds4153

@chrismcclure71 Жыл бұрын

Actually of course

@jeffwilliam7500 Жыл бұрын

6 speed or 5?

@brianreynolds4153 Жыл бұрын

It comes with 5 gears stock

@jeffwilliam7500 Жыл бұрын

Sweet thanks

@sthembisomhlongo6822 Жыл бұрын

Nice. 👌🏾

@kentmorgan6129 Жыл бұрын

looks good

@Jarda_B Жыл бұрын

I would not say that because if the suspention travels up the uper swing arm will push on your leg from underneath, One of the bigest problems I was forced to solve, but he really dont even tried to come up with better solution.

@brianreynolds4153 8 ай бұрын

Pushing on my leg was not the issue. Bump steer was😂😂

@GoKartsorGoneFishin Жыл бұрын

Cool build ..I dig it

@brianreynolds4153 Жыл бұрын

Glad you liked it. It’s getting another change currently. I will try to get the video up by Christmas. I have a few more changes before it’s done

@mikeg7599 Жыл бұрын

Good job! You inspire me to start work on my atv.

@brianreynolds4153 Жыл бұрын

YES!!! Don’t let the cold season stop you. Get that thing ready for the summer!

@fairleighlansing2121 Жыл бұрын

🙌 *Promo SM*

@marcelrivero4509 Жыл бұрын

i did all the mods to mine as well 17t front 43t rear, 28mm nibbi carb, and exhaust and ive gotten it to 76 mph but it took a lot to get there. 60 mph is its sweet spot, I have the 300cc cylinder that im yet to install....loving the bike

@brianreynolds4153 Жыл бұрын

Do you have the link to the 300cc? I been looking for one but haven’t pulled the trigger

@marcelrivero4509 Жыл бұрын

@brianreynolds4153 i bought it off of ebay. I looked this morning but the seller who whole is unavailable. If I find another ill post the link for you

@markcollins5026 Жыл бұрын

Man. does your gear indicator still work !

@brianreynolds4153 Жыл бұрын

Yes! The only thing that doesn’t work is the “N” light.

@keckerson6396 Жыл бұрын

I live in south jersey and I was able to register mine👍 I use it to commute to work. I did all of the mods and I love mine! Close to 6500 miles already. With all of the mods I have hit 74. 17/43 sprockets Mikuni carb 115 main/22.5 pilot Nibbi coil E3 spark plug Exhaust Running rottella T5 oil Pro taper bars/ grips Fog lights Oil cooler Oil catch can for blow by and a cone filter. ( I don’t use the air box) Better clutch springs It runs great, I have about 2300 into it. Mine is blue 👍 The only thing that I have changed so far is the nibbi coil ($15) I do oil changes every 1500 miles and adjust valves every other oil change if needed.

@josuemelendez5441 8 ай бұрын

Have you ever hopped on 295

@keckerson6396 8 ай бұрын

Yes, obviously staying in the right lane. Staying at 65. I now have 7500 miles on my bike👍

@keckerson6396 8 ай бұрын

Only on for about 5-10 miles. I normally keep it at 63mph. I have a 45 minute commute at that speed most of the time. I don’t care if people pass me, I can get the bike to 74 but it is screaming and I don’t like to keep it there.. 63 can go all day long

@josuemelendez5441 8 ай бұрын

@@keckerson6396 I just brought a tbr7 and I used to live in Camden but moved to voorhees so I really can’t ride her around not having a tag I got a temporary on for now and it has some upgrades to it cdi box exhaust spark plug I’m gonna order a nibbi carb for it and I do have a sprocket that came with the bike but for some reason it just stays at 60 on the gauge and she was screaming

@keckerson6396 8 ай бұрын

Did you change your sprockets? I’m running a 17/43. The set up is more for top end speed. it won’t have as much Low end torque. But I wasn’t looking for that.

@bh251cc Жыл бұрын

did you notice any performance changes?

@brianreynolds4153 Жыл бұрын

No unfortunately not. It sounds better tho! So it’s still worth the time and money.

@audiomonster303 Жыл бұрын

I remember pulling a wheelie on my bmx as a kid and the front tire fell off!! CRASH!

@brianreynolds4153 Жыл бұрын

I hope to very do that!

@audiomonster303 Жыл бұрын

In the future I will just add the 300cc setup, that would make 65 mph achievable I think with 3- 4000rpms or so. Its only 229cc stock.

@brianreynolds4153 Жыл бұрын

I have been looking for a 300cc kit for the Hawk/Tbr7 but can’t find one that is not Chinese cheat. Any recommendations?

@audiomonster303 Жыл бұрын

@@brianreynolds4153 Bro the bike is chinese, no such thing as a non chinese part for it lol

@brianreynolds4153 Жыл бұрын

@@audiomonster303 touché

@audiomonster303 Жыл бұрын

@@brianreynolds4153 I am more concerned with where to buy it safely, is aliexpress a good site? If so its the place

@audiomonster303 Жыл бұрын

@@brianreynolds4153 And just so you are aware it only raises it to a true 250cc, not 300. Still worth doing to achieve the extra 21 CCs

@audiomonster303 Жыл бұрын

Im pretty sure those are just caps on the stock carb that can be drilled out to access the screws?

@brianreynolds4153 Жыл бұрын

I did put bigger jets in. I believe I have a 32 and a 115 in it. It’s a cheap Amazon carp

@brianreynolds4153 Жыл бұрын

I should have said I bought an Amazon aftermarket carb

@audiomonster303 Жыл бұрын

just got one on order, should be here next week! keep the updates coming it helps us Tao owners know what happens when mods happen! And what mods to or not to do

@brianreynolds4153 Жыл бұрын

Let’s go!! Get the sprocket (front and rear), new carburetor and you’ll be ready to go

@audiomonster303 Жыл бұрын

I like the stock sprockets, the road I will be driving is 0nly 35 mph. I just plan on fishing, and collecting elk sheds and riding trails no highway. Luckily I live in the mountains already! @@brianreynolds4153

@mucahitk4674 Жыл бұрын

the catalytic converter light is on on the screen, i changed it, does it go off?

@brianreynolds4153 Жыл бұрын

Unfortunately I will forever have a check engine light

@bh251cc Жыл бұрын

@@brianreynolds4153An O2 spacer might work

@abrahamescoto1912 Жыл бұрын

You need to tune your car after throwing on a high flow cat. Tuning it will turn the check engine light off and will properly flash your ecu to the proper modifications. I have a b8.5 with a HFC and a stage 2 tune and I don’t have a check engine light

@xJ.M Жыл бұрын

Good vid bro, any other mods done?

@brianreynolds4153 Жыл бұрын

Not really. It’s got a lot of miles so it’s not worth spending the money on. I will probably do suspension soon since it’s pretty old.

Ең жақсы KZbin

Пікірлер