TaoTao TBR7 35T Sprocket Upgrade

[@keckerson6396]

I live in south jersey and I was able to register mine👍 I use it to commute to work. I did all of the mods and I love mine! Close to 6500 miles already. With all of the mods I have hit 74. 17/43 sprockets Mikuni carb 115 main/22.5 pilot Nibbi coil E3 spark plug Exhaust Running rottella T5 oil Pro taper bars/ grips Fog lights Oil cooler Oil catch can for blow by and a cone filter. ( I don’t use the air box) Better clutch springs It runs great, I have about 2300 into it. Mine is blue 👍 The only thing that I have changed so far is the nibbi coil ($15) I do oil changes every 1500 miles and adjust valves every other oil change if needed.

[@josuemelendez5441]

Have you ever hopped on 295

[@keckerson6396]

Yes, obviously staying in the right lane. Staying at 65. I now have 7500 miles on my bike👍

[@keckerson6396]

Only on for about 5-10 miles. I normally keep it at 63mph. I have a 45 minute commute at that speed most of the time. I don’t care if people pass me, I can get the bike to 74 but it is screaming and I don’t like to keep it there.. 63 can go all day long

[@josuemelendez5441]

@@keckerson6396 I just brought a tbr7 and I used to live in Camden but moved to voorhees so I really can’t ride her around not having a tag I got a temporary on for now and it has some upgrades to it cdi box exhaust spark plug I’m gonna order a nibbi carb for it and I do have a sprocket that came with the bike but for some reason it just stays at 60 on the gauge and she was screaming

[@keckerson6396]

Did you change your sprockets? I’m running a 17/43. The set up is more for top end speed. it won’t have as much Low end torque. But I wasn’t looking for that.

[@jakerook6248]

I run a 17/42 on my bar Raven, and it seems like the ideal setup. Comfortable at 55-60, and still enough torque to top out 5th. Top speed now at 75 mph when pinned 😁

[@brianreynolds4153]

I’ve swapped back and forth from 17/42 and the 38. Depending on where I need to go. I have the 450ss for the longer rides now

[@jakerook6248]

@@brianreynolds4153 nice 👍 I wanna get a kpx 259 for my next bike and turn it into a sumo for the longer rides. I wish I could do it with a klx or a CRF, but I'm too poor to afford a new one like I can with the lifan being half the price 😅😅

[@marcelrivero4509]

i did all the mods to mine as well 17t front 43t rear, 28mm nibbi carb, and exhaust and ive gotten it to 76 mph but it took a lot to get there. 60 mph is its sweet spot, I have the 300cc cylinder that im yet to install....loving the bike

[@brianreynolds4153]

Do you have the link to the 300cc? I been looking for one but haven’t pulled the trigger

[@marcelrivero4509]

@brianreynolds4153 i bought it off of ebay. I looked this morning but the seller who whole is unavailable. If I find another ill post the link for you

[@chrismcclure71]

Actually of course

[@Charles-yv9wy]

What front sprocket are you running?

[@brianreynolds4153]

Sorry for the late reply. I have a 17 tooth in the front. The 17 does not have clearance issues but any bigger will

[@marcelrivero4509]

@@brianreynolds4153 I'm runny 17t front and 43t in the back. Seems to work very good

[@mr.somebody1493]

Where did you get the sprocket ?

[@brianreynolds4153]

Here are all the Amazon links for the sprockets I have bought: JT Sprockets JTR269.35 35T Steel... www.amazon.com/dp/B000GTV5U4?ref=ppx_pop_mob_ap_share JT Sprockets JTR269.42 42T Steel... www.amazon.com/dp/B0068O5N5Y?ref=ppx_pop_mob_ap_share JT Sprockets JTF259.17 17T Steel... www.amazon.com/dp/B004DNA0KA?ref=ppx_pop_mob_ap_share

[@mr.somebody1493]

Thanks. @@brianreynolds4153

[@jeffwilliam7500]

6 speed or 5?

[@brianreynolds4153]

It comes with 5 gears stock

[@jeffwilliam7500]

Sweet thanks