That center area you could make it into a rock climbing obstacle course?
@TandTRCКүн бұрын
I've been trying to decide what to do there.
@joshuaclark34144 күн бұрын
Hold up. I’ve been watching your jelly test for years it feels like and now I find you doing RC? My kind of guy! 😂
@TandTRC4 күн бұрын
Appreciate ya, brother. All about some fun!😎👊
@clutchcargo12394 күн бұрын
Haven't been paying much attention to NASCAR. I used to love it until they went woke and literally forgot who their fans are. The woke NFL style made for TV rules crap lost me. NASCAR used to be fun. This car looks to be fun with any body styling. Racing a bunch of friends inside a big hanger or gymnasium would be a blast.
@TandTRC4 күн бұрын
Same here. I don't watch any sports anymore. I have a clear Chevy body for it that I gotta paint up.😎👊
@steelpunisher69444 күн бұрын
Very cool new addition. Like you I used to way back in the 90s and early 2000s but know nothing about it now. I’m eager to see how much speed you can get out of it. 👍🇺🇸🇺🇸
@TandTRC4 күн бұрын
Appreciate ya, brother!😎👊
@randylivengood31124 күн бұрын
The electronics from the Typhon Grom BLX should swap right in there in about 10 minutes. I’m temped to get one of these to try that out
@TandTRC4 күн бұрын
I have a set sitting here for that exact purpose.😎👊
@randylivengood31123 күн бұрын
@@TandTRCI can’t wait to see the results. I just stopped by my local hobby shop and they had one of these Bass Pro Shops cars left. Kind of kicking myself for not grabbing it!
@TandTRC3 күн бұрын
@@randylivengood3112 I finally found some adjustable links in stock for this one. Not really a need but I figured I may as well get it all fancy.
@PaulomarcosgodriGodri4 күн бұрын
Very Nice
@TandTRC4 күн бұрын
😎👊
@diggernash14 күн бұрын
BoLink was based not far from where I grew up. I had fun pan car that was insanely fast for the 80s. When you spun it, it became an airplane. It survived until the late 90s when my 5 year old daughter curbed it wide open. I can assure you that a carbon fiber chassis can be turned into pieces of carbon fiber...lol.
@TandTRC4 күн бұрын
🤣
@l.a.38874 күн бұрын
Another cool car 👍👍
@TandTRC4 күн бұрын
😎👊
@motobator18954 күн бұрын
That looks cool, also been “out of the loop” lol on NASCAR
@TandTRC4 күн бұрын
💫
@dietrichjohnson95564 күн бұрын
IS Losi the What used to be Team Losi in the 80's? They made screaming fast 1/12 scale cars in the 80's. Used to race them on inside road coarse tracks. If the company is the same they made stellar cars in the 80's. Never had the rubber road tires they were all hard foam then but they had great traction on the smooth flat tracks.
@TandTRC4 күн бұрын
Same company but I imagine they have changed hands/ownership over the years.😎👍
@charlesmorgan18794 күн бұрын
Nice ! 20 doesnt sound fsst till your beatin and bangin around a track with other cars...but mo speed mo better !
@TandTRC4 күн бұрын
True!💥🚗🚘🚕🚓💥
@spike--4 күн бұрын
All the stupid rules and scoring has made NASCAR unwatchable.
@TandTRC4 күн бұрын
Yeah, I've seen some clips and things where it's a lot different now.
@diggernash14 күн бұрын
They simply refuse to stand the windshields up and put more spoiler on them. The lead car should be a sitting duck on every track 1 mile and longer. I think the drivers don't like other cars closing on them, and going by, like they are dragging a parachute.
@LuckyDog350X4 күн бұрын
That is a cool little unit, doggone pebbles took er out 😆If you like this style of running too you maybe might like the Aarma Infraction, lots of high speed donuts, ripping, drifting/sliding.
@TandTRC4 күн бұрын
The bigger scale would probably deal with the grass patches and pebbles for sure.
@hoesanboats4 күн бұрын
i want one just to put a porche body on it and brushless
@yuvgotubekidding4 күн бұрын
I was waiting for you to replicate your run in the Durango. 😆👍🇺🇸😎👊
@TandTRC4 күн бұрын
😆😆😆
@GreyShooter4 күн бұрын
Now you're speaking my language! Looking forward to Dayton. 🏁🇺🇲 This is very cool. 😎 ps..Truex retired last year. Rowdy Nation here.🏁🏁🏁
@TandTRC4 күн бұрын
These things are sweet looking. Definitely gonna get it movin faster.😎👊
@johnricci79355 күн бұрын
It’s says on the box 40mph + ?
@TandTRC4 күн бұрын
No
@Shedseller-i7u7 күн бұрын
Junk
@TandTRC7 күн бұрын
I'm definitely not feeling too good about it after this. They supposedly sent out the cvd replacement, so we'll see how it goes after I get it fixed.
@RCredneck857 күн бұрын
I upgraded to a hobbywing quicrun 10BL120 with a 3652 4000kv motor
@TandTRC7 күн бұрын
Nice. I bet it moves out now.
@lornefrancis92317 күн бұрын
Looks awsome I have 2 stampeed vxl one I have used up to 6s very easily, but 4s all day just needs dtiveshafts but that one got new shafts but its basically a stampeed which isn't a bad thing at all .body rocks
@TandTRC7 күн бұрын
Nice. I'll probably end up putting the 3s VXL motor in this one.😎👊
@lornefrancis92317 күн бұрын
@TandTRC for sure plenty if power and bolts write in .gets a little hot on 3 s sometimes but geared write 2 s on 3 s system is great .I havnt seen anyone cut the plug off the 2 s motor and run it 3 s to see how long it last .
@P.Trim698 күн бұрын
Stay safe from ur ole hillbilly buddy
@P.Trim698 күн бұрын
Here's a few feed the machine it's ALG dinner comments
@TandTRC8 күн бұрын
Appreciate ya, brother!😎👊
@P.Trim698 күн бұрын
And I'm pretty dog gone happy with this video another great production .
@P.Trim698 күн бұрын
Tools you had me rolling.😅 . Mount Mount. Just like home. Love ya brother keep up the great work.
@P.Trim698 күн бұрын
Yes Sir I liked it in real thing to that's when they starting to be cages. Lol that's what ur saying now. Stomper bully , USA 1. All bigfoots ,grave diggers. Yes Sir good ole Days 87- 95. Yeah buddy. Stay safe from ur ole hillbilly buddy
@TandTRC8 күн бұрын
Fun stuff!
@MaxD808x8 күн бұрын
Awesome, where can I buy one ?
@TandTRC8 күн бұрын
I got this one from my localish hobby shop. I see that A-Main has them in stock online though.
@staysmallrc9 күн бұрын
Brother, I have been asking the same question: Where is the trim? Started sane as you with the little rcera Bell 206 but with optical flow, and it's awesome except in the wind, but here in New Mexico, it's always windy! Just got the 206 version of your huey, and it's a beast compared to the little guy. It also doesn't stop without stick input. I overran tree lines and learned real quick! It's perfect for what it is. Us rookie pilots gotta learn trigger control! He he ret. LEO. Dig your channel! Stay small is mine, a lot harder to hit! 🤙😅
@TandTRC9 күн бұрын
Thank you sir. Appreciate that! I'd love to get a bigger GPS one, but that's a lot of cash to risk.😆
@staysmallrc9 күн бұрын
@TandTRC no doubt! 😎
@dietrichjohnson955610 күн бұрын
Can. You change your main gear vs pinion. When i ran RC10s changing the main gear made more influence on speed pinion changed torque more
@TandTRC10 күн бұрын
Yeah, I can. I was just trying to go the fast, easy route with the pinion change.😂 The more I run it though, I think I might just need to go with a stronger motor. I think I'm right at the edge of giving up too much low end if I gear it up much more with this motor.
@robertschofield998110 күн бұрын
I only have one question. Why is this only 1:10? The USA-1 is solid axel at a disadvantage. So why can't any RC brand do this. 1:7 or 1:8 minimum, same suspension as this. This would give big foot fans the best of both advantages. At the moment - I'm still waiting for this. There's always a flaw!
@TandTRC10 күн бұрын
I actually love the solid axles for the look, but these independent setups definitely give you better bashing performance.
@robertschofield99819 күн бұрын
@TandTRC solid axels roll easier & can't perform on bumps as well. I used to have Tamiya Juggernaut 2. So I know this size situation. The older big foot was RWD same as Blackfoot, Monster beetle etc.
@MidWesternShootingEnthusiast10 күн бұрын
This looks awesome! I want one!
@TandTRC10 күн бұрын
I think it's sweet!
@weilandlawncareservice559210 күн бұрын
Nice looking rig Tools, I always loved Big Foot As a kid. Have you tried out the little Redcat MT-18 yet? They are a sweet little scale monster truck for sure. You can add rear steer. I picked up both colors. They are a blast to run in the basement.
@TandTRC10 күн бұрын
I haven't but I thought about getting that Edelbrock one.😆😆
@rcgeneration82410 күн бұрын
I used to own an original Traxxas Stampede. I bought the kit version from my local hobby shop, the last one they had. So much fun to build and run. I really appreciate this version even though now my son and I are into crawlers/trailriders. I must say that I loved your video/review. Heck, I love where you live its breathtaking! Anyway I wish Traxxas would produce kit versions of this model. Thank you sir for such a refreshing video, take great care. Greetings from Texas. 👋🏻
@TandTRC10 күн бұрын
Thank you sir. Appreciate that. Building and modding these things is definitely a huge part of the fun. I do have a big pile of parts sitting here to do a TRX4MT build soon. Just waiting on a few last things.😎👊
@YellowHammer2610 күн бұрын
👍👍That’s a great looking truck
@TandTRC10 күн бұрын
💥😎👊💥
@tobalgiger10 күн бұрын
Wow this car seems to be a beast! Lovely track also!
@TandTRC10 күн бұрын
It seems like a good one so far.😎
@tobalgiger10 күн бұрын
I love this car. I have the 2wd and it makes me smile every time I take it out for a spin! Onboard camera ir really cool!
@TandTRC10 күн бұрын
Appreciate that! I'm definitely gonna be doing some more stuff with this one.😎👊
@OffWorldAmbience11 күн бұрын
Does that come ready to run? Good video truck looks good.
@TandTRC11 күн бұрын
Appreciate that! You still have to get a battery and charger for it.😎👍
@brandiwynter11 күн бұрын
That's a beautiful Bigfoot. I like the onboard camera, what kind is it? I've wanted to put one on mine if they aren't too $$$. Comparing the trucks out there it seems like this one is a bit more $$$ than it should be but I do love Bigfoot. I remember back in the late 80's or early 90's we had a shop in our small town that the guy did a lot of custom fabrication which was far less uncommon at the time. One day I saw a truck on a trailer pulling into their shop and it was a small Ford Ranger compact size Bigfoot. It had the classic Bigfoot paint job and was sitting on comically small tires to keep the center of gravity lower I guess. The trailer also had the moster tires as well. If I remember correctly it was called something like Baby Bigfoot, Little Foot or some play on the Bigfoot name. I always assumed it was probably owned by the Bigfoot folks because otherwise they would catch hell for an almost exact copy other than being a compact ford truck. Had a crazy cool mini monster truck chassis and everything. I have no idea what ever happened to it and I've never seen or heard of it since but it was cool to see at the time. This little RC reminded me of it is why I mentioned it. Anywho, I guess I know what my next RC on the wishlist is lol.
@TandTRC11 күн бұрын
Nice! I know they had a Ford Aerostar van Bigfoot too at one time. This camera is perfect because it's so small and does 4k, but it's expensive. It was right at 400 bucks. There are a bunch of cheaper options out there that would work too. I just got this one so I could use it for other shots too. You definitely pay a Traxxas and Bigfoot tax for this one.😆
@charlesmorgan187911 күн бұрын
Very nice ! Like the in car and close up ground views.
@TandTRC11 күн бұрын
Thank you sir.😎👊
@LongBeard6711 күн бұрын
Some anodized blue shocks springs and accessories would be sharp!
@TandTRC11 күн бұрын
Yeah, I might have to dress this one up some.😎👊
@lbmullinax938711 күн бұрын
Sweet...Bigfoot always a favorite...git er dun Tools
@TandTRC11 күн бұрын
💥😎👊💥
@RCBasherLiMa11 күн бұрын
Man the bl2s brushless system is so bad lol , it’s basically a brushed system with those speeds
@TandTRC11 күн бұрын
You don't notice it too much on small spaces like this, but you definitely do on a wide open run.
@applefordguy7611 күн бұрын
New subscriber, love your shirt, we can be friends 😊 Love all my Arrma machines!
@TandTRC11 күн бұрын
Appreciate that!😎👊
@gamedogrc11 күн бұрын
I own one and only broke a suspension arm pin. Replacements got to me in 4 days. Sucks yours broke so easy. Mine broke after a runaway that hit a parked car tire 😂😂 i still think its the best mini you can get for the money as the mini maxxis 250 for 2S. Great Video.
@TandTRC11 күн бұрын
Thank you sir. I did get a reply from them that they were sending out a new cvd. Probably gonna be delayed with Christmas and all. I actually ordered some myself from Amazon that are labeled as a different brand but the same exact part number. I wanna wait until I get the ones from them though so I can do a review on the service and all. I'm wondering if I should go ahead and order some of the alloy upgrade ones from them too.
@gamedogrc10 күн бұрын
@TandTRC cant wait to check out that vid.
@gamedogrc11 күн бұрын
Wish It Came With The 3S Velineon System Though.
@TandTRC11 күн бұрын
Yeah, I got one sitting here that I was gonna put in the Mini Maxx, but I might use it for this.
@gamedogrc10 күн бұрын
@TandTRC yea id leave mini maxx 2s alone so you dont have to wrestle with the diffs.
@gamedogrc11 күн бұрын
Traxxas Hit It On The Money W This Truck. I Gotta Get One In The Future. Slapped You With A Sub Bro. Great Video.
@TandTRC11 күн бұрын
Appreciate that!😎👊
@ejlucas9311 күн бұрын
Gonna have to get me one!
@TandTRC11 күн бұрын
Sweet truck 😎👊
@GreyShooter11 күн бұрын
😎👍👍👍👍🇺🇲
@TandTRC11 күн бұрын
💥😎👊💥
@asplenia11 күн бұрын
Awesome review! Keep up the great work! Asplenia.
@TandTRC11 күн бұрын
Appreciate that 😎👊
@mattsmith180211 күн бұрын
Tools you inspired me. In 08, i bought a couple of totes of nitro rc cars from a coworker, and they have been sitting in my basement ever since. I got the ofna buggie running today! Now, onto the traxxis