I think this is a great video, thank you, but nobody mentions the magnetic ABS rings that don't come on the new discs. You must remove them from the back of the old discs and put on the new. It's a really important step otherwise the ABS warning light, and the service soon spanner will illuminate permanently without them.
@JUrtanschannel3 күн бұрын
But do you think anyone sells those discs without it for this Megane 2 model? I looked online and my part seller sells just with abs ring and bearing, or without bearing and so without abs ring, since the ring is within the bearing.
@shaunussyКүн бұрын
@@JUrtanschannel 100% eurocarparts uk, 2 weeks back for my megane cc 2006 diesel. The discs can and are sold without bearings on autodoc, but I bought discs from euros, and whilst they have bearings, the magnetic abs rings are slipped over the back and not part of the bearing.
@karatecorgi76853 күн бұрын
oh my god, i ALWAYS forget my window and jave to briefly turn on electric to shut it, almost every trip 😂 im hoping this will work for me too! my car is renault scénic 2 but the keycard is identical so... 🤞🤞?! hahah, rhank you for the video :D
@bornwellmachando225811 күн бұрын
Thank you brother. This week I want to change my car gearbox oil
@Tutancomeon114 күн бұрын
Please can you write me the shedule of the wire
@Mar_OOnn22 күн бұрын
Driver side. 5 min And Done, but my arm Is broken 😂
@timanderson251725 күн бұрын
So useful. Thanks. Will be doing on my Megane 1.6dci. I'm glad I'm not the only one who hits their head, drops the drain plug and spills oil. Authentic and real. Love it.
@Danis49827 күн бұрын
Ufňukaný jako děvka,kamerou svihas sem a tam,vůbec se na to nedá koukat a hlavně tě poslouchat
@olivcarpentier424529 күн бұрын
Terrible car, terrible video.
@Alecross1Ай бұрын
Thank you!
@gabrieleantenucci6845Ай бұрын
Thanks a lot! You really helped me!👍
@yan24toАй бұрын
👍🏼 new sub.
@wams467Ай бұрын
What are the fuses for the interior lights ?
@JUrtanschannelАй бұрын
To be honest, idk and I dont have the car anymore to check, but I would start by inspecting what else besides interior light does not work, probably the fuse is linked to something else as well, and secondly I would guess that if it is fuse, then I would go and look into the fuse box next to the steering wheel, under the light swithes, if it is fuse problem at all, from my exp with Megane 2, well 3 times i had some issues seemed caused by blown fuse, but all 3 times faulty was cables with corrosion or connection with corrosion, it is funny that metal body is very good against corrosion for Renault, but wirings, aiaiai... :D just have to check for blueish cables where cable color is not blue
@wams467Ай бұрын
@@JUrtanschannel Okay, thank you very much for your help
@2160pАй бұрын
hi there, do you remember all the bulb types/sockets/watts for the cluster? i want to get rid off the green and have a blue lighting
@josipmarketanovicАй бұрын
Bravo
@walterturner6559Ай бұрын
Good video. I didn’t have paint inside. I had rust from cleaning with water. Sanded everything, work fine now.
@MrTadimirasАй бұрын
Finally a video that helped! 🚗🚗🚗
@hazharshahabzadeh887Ай бұрын
Tnx , was very helpful 😊
@77DaWe772 ай бұрын
Thanks you very much for this video. I can't believe i done it. Because of you! Sorry for my english 😂 thank you!!! 🤩💪😁
@JUrtanschannel2 ай бұрын
Thanks!
@absaxoclar2 ай бұрын
this didn't work for my unit but hearing this accent say to use two knives was hilarious to me
@Erazor9872 ай бұрын
I have 2008/9 Megane Sedan in this same color,and same problem with light,but I will take him to my mechanic,my hands are too big,plus I have problem with that smaller light at the same spot,recently chanched bulb and it worked for 3-4 days before it went out. I noticed it was shining a lot brighter than it should be before it went out.
@tonyzs75902 ай бұрын
Bought this car used in 2018 and I only found out today about this feature! Thank you!
@ValleysOfSaturn2 ай бұрын
Very nice video. Nissan Note is an incredibly good car. One remark - you should have removed that beautiful and shiny watch from your hand before doing the work. ;)
@iacobfidos49892 ай бұрын
Thank you for posting, will help me a lot tomorrow when helping my friend with his car 💪🏽
@whiteeagle81402 ай бұрын
The smartplug was on the app screen, and i could turn it on, and even set a timer. Then i pulled it out of the socket, because i need it upstairs. And now it says network not initialized? I find it very irritating that you can only get a plug in with brute force, you almost have to demolish the thing.
@joeoehm43412 ай бұрын
It's a very nice report! I have a question about the refrigeration circuit for the monoblock with R32. Do you also have a 5/16" SAE connection on the suction side for filling, evacuation, suction, etc.? - as with air conditioning systems or split systems with R32? Or is it different? Normal refrigeration systems have 1/4" SAE connections on the high and low pressure side, which can be opened via Retalock valves and of course the solenoid valve for refrigerant line OPEN or CLOSED. So far I have not been able to find any information on this and I have never installed a monoblock R32 and of course it will have to be serviced at some point and the refrigerant circuit will have to be worked on.
@fredsapps37942 ай бұрын
Works!!! Cool. I used a normal non sharp kitchen knife. Do not be afraid to push hard. I did one side at a time
@laxesa49612 ай бұрын
Thx
@bikkojisedi3 ай бұрын
You could spray it without removing it??? Right?
@INTERNA93 ай бұрын
WORKS!
@DingoCraft_3 ай бұрын
Somebody stole my car radio
@jandrozdzynski8103 ай бұрын
Just thanks bro
@guervan3 ай бұрын
Super utile merci beaucoup !!
@muntmunt17023 ай бұрын
Instructions unclear. Can you please write down step by step how to and what buttons to press
@ferencdarabos99313 ай бұрын
Hulladék
@mattbowd3 ай бұрын
Also deadlocks the doors (and if you have a sunroof, it will close that as well)
@life-is-excellent88613 ай бұрын
What is the solution? You spend too long saying that it does not work, but you show no anwer that I can see
@JUrtanschannel3 ай бұрын
Answer is different hdmi cables and if you got different model cameras, try to swap them in places. As well hdmi booster helps a lot, I have been using them a lot for cables that are not optical fiber (i ve opted out for them since they are no more that expensive)
@willgorut873 ай бұрын
As Megane II owner I can tell you that it is easier if you introduce the probe from the pollen filter enclosure. You can use something like a steel wire flexible enough to go through the tube until its end back and forth and put some water in it so that the dirt is easily washed out.
@morandfm3 ай бұрын
Hi, Thank you so much for this video ! I disassembled the motor as you show it and I found so much paint in it. One of the motor brush was completely stuck in paint. Maybe I will need to replace it by a new one. I search on Internet but the only ones that looks similar are for washing machine and they looks too big. Refering to your channel, you looks as a very good mechanic. I thought that maybe you could help me to find the good model of those motor brush. I live in Canada but I can order from anywhere worldwide as long as I am sure to order the right item. I thank you in advance for any help you could give me or my husband (Michel) who already wrote you for the same matter. I am better in searching internet or to manage my KZbin channel. Please answer me first if you don't mind.
@MichelCarrier-ut2oh3 ай бұрын
Thanks for this video. Last time I washed my paint sprayer, I forgot to put back the red washer in the nozzle. What a mess !! The paint went inside my motor and I tried to clean it the best way I could but I didn't succed. After seing your video, I desassemble the motor and I found so much dryed paint in it that it couldn't work. One of the motor brush was completely coverd of paint. I soak the parts in hot water with black soap for a few hours and scrub every little parts with a dentist tool and a needle. I finnaly got all the paint off. I think that I should remplace the motor brush that was full of paint because I dammaged it in scrubbing the paint. Do you hage an idea of the motor brush model I should order ? I search on internet but the only similar motor brush I found were for washing machines and they seams to be too big. Thanks for your help.
@JUrtanschannel3 ай бұрын
Hi there, I dont know exact dimensions/part number of the brushes, but I suggest you to take one out and if hardware or electronic tool shop does not have the same one, buy little bigger and just file the new one to the original size. Of course it is not the best solution, but if you do good job, it will be as good as original, if you wont file it quite a close to original dimensions, it may overheat and melt the plastic where brushes are located and destroy the motor. Sorry for not beining able to help.
@germanshitboxenjoyer3 ай бұрын
Did it on my 2.0. Engine stopped dying. P0130 error in OBD disappeared. All for 10€ and 3 minutes of work. Thank you.
@user-rx9yu1nt2j3 ай бұрын
Exact same issue, and this video was really helpfull to disassemblyle and fix. Nice job! The exact problem with my sprayer was that the paint insixe the motor prevented one of the spring loaded brushes from moving to contact the rotor. Clearly a design flaw that allows paint to get to the motor and cause this issue with normal use. What I don't know is, how do you prevent it from happening again? It's. It like you should run water through the motor to clean it.
@charliegabriel91644 ай бұрын
thanks. it helps a lot.
@huragan794 ай бұрын
To jest kurw@ chore
@Phabeana4 ай бұрын
Same procedure for d3300?
@kuttamaakri4 ай бұрын
Thank you. It still works in2024 😂
@zozekMain4 ай бұрын
good job, don't replace but repair👍👍
@vasijey22714 ай бұрын
Excellent
@user-ut2do7pi8i4 ай бұрын
Hey thanks much I just watched your video and was able to fix mine.
@Ledav14 ай бұрын
Thx so much for this video👌 you saved me 200€ easy