@@sunny5rising kzbin.info/www/bejne/a3qUlnpqbr2hiqM Measurement with a 3D probe, only in Mach
@zztop85924 күн бұрын
Those fckn car companies should be made to put a real frame under their vehicles, not a subframe!
@wong-wongcreative31165 күн бұрын
I'm from Indonesia, I really like the videos you make. Very helpful for those who are just learning CNC machines. thank you 🙏🙏🙏🙏
@sunny5rising5 күн бұрын
Thank you. Glad you enjoy the videos and glad they are helping. :)
@emh11415 күн бұрын
Bro thanks for the video and the humor
@sunny5rising15 күн бұрын
You're Welcome. Glad you enjoyed it.
@derjungemensch5902Ай бұрын
I had to brake hard in my 2010 dodge caliber after years of northern road salt and my front subframe snapped.
@sunny5risingАй бұрын
Scary stuff for sure!
@belfalcon1692Ай бұрын
Hello Sir, great job with those scripts but, unfortunately I can't find them. Is there a procedure to have access and download those sripts. Thanks. Regards
@sunny5risingАй бұрын
In the description of the video are links to the files. If you still have issues, you can email me at [email protected] and I'll email them to you.
@belfalcon1692Ай бұрын
@@sunny5risingThank you for such a quick answer and I've just found them meanwhile. I'm gonna use them with a homemade CNC based on a EC500 ethernet controller. Is there anything I should take care of using those scripts on a ethernet controller? Regards.
@sunny5risingАй бұрын
The version marked USB should work fine for you. Do test with loose parts to make sure it works as you expect. If you have issues, you can email me.
@raulmarin1544Ай бұрын
hi charlie do you know why when I home homes twice second time at a lower speed please help.
@sunny5risingАй бұрын
If possible, take a short video and send it to [email protected] or upload it to KZbin so I can see exactly what's going on.
@Bo-Ta-Ай бұрын
Works without cables ? Hm....
@sunny5risingАй бұрын
No, this video is just building the switch assembly. The wiring is a few videos later.
@Bo-Ta-Ай бұрын
@@sunny5rising good idea ! But better on the construction ( not bends cables ) it's secured on the construction or body of z axis. I make right know small cnc at home. I like to make z axis hard limit switch on fixed construction, not movable construction. All limit switch is on fixed construction
@jaimevillada9150Ай бұрын
Gracias por compartir. Esto también sirve para mah3 torno ? BENDICIONES.
@sunny5risingАй бұрын
I'm not sure if this works for Mach3 lathe.
@jaimevillada915022 күн бұрын
@@sunny5rising no funciona, 😭🙏🏼💪🏼
@jaimevillada915022 күн бұрын
@@sunny5rising muy frustrante 😥
@sunny5rising22 күн бұрын
I understand.
@jaimevillada9150Ай бұрын
Saludos desde Colombia Me complace mucho ver sus videos y su risa contagiosa. Estoy buscando la manera de hacerlo para un torno🙏🏼💪🏼👍🏼👏🏼
@sunny5risingАй бұрын
Thank you. Yes, you can edit the lathe screenset. The original lathe screenset name is 1024.lset
@jaimevillada9150Ай бұрын
Hello, I want to implement that nice system in lathe mach3. can you help me?
All scripts work on my starmacnc 6060 with Ethernet connection. Thanks!
@sunny5risingАй бұрын
Excellent! Thank you.
@lightlight6580Ай бұрын
Very helpful video, my friend. Detailed explanation . Walking through process. Well done
@sunny5risingАй бұрын
Thank you. Glad you enjoyed the video.
@jaimevillada9150Ай бұрын
Esa el la mejor risa de internet CNC, gracias por compartir.
@sunny5risingАй бұрын
Thank you. I'm glad you enjoyed it.
@robertulmer875Ай бұрын
Thank you I appreciate all your videos and work. This works on Ethernet on my mach3 motion controller
@sunny5risingАй бұрын
You are welcome. Thanks for commenting.
@bogas78Ай бұрын
Hi Charlie, how can I contact with you directly ? iI will need some help with few custom scripts for Mach3 and maybe you will be able to write and help ?
Can someone please provide a free download of the script?
@sunny5risingАй бұрын
Hello. The script download is free. The link is in description. If you are unable to download it, just email me at [email protected] and I'll send it to you.
@Dragon-Slay3r2 ай бұрын
What advert cult want to use now? 😂
@sunny5risingАй бұрын
Sorry, I don't quite understand your question.
@jeroenbeskers30122 ай бұрын
Hello, i tried using this but the system still doesnt work for me. I dont know what i specifically did get wrong. Maybe its because i use a ethernet poort or something with offsets that i didnt take into account. But after it gives a offset of -1,26.... It adjusted that number too -2361,00 consistently. Does anyone have some clues why this could be?
@jeroenbeskers30122 ай бұрын
Another note, it only does this in the negative direction of the y and x axis. The positive gives the correct adjusted offset. The correct one looks like 2,27 while the incorrect version is -227,0
@jeroenbeskers30122 ай бұрын
Combining the solution of the previous comments and setting the gauge to zero it works!
@sunny5rising2 ай бұрын
Glad you got it figured out. If you have any more issues, email me at [email protected]
@ViceFiori-t7y2 ай бұрын
Ok, I find a way to solve the problem without any modification for you guys who using usb: If you have problem on -Y and -X with 10x more numbers (like 320mm) it´s JUST the "VarStandOff" on the start. I dont know why but cause this issue if you set at "1.27" but if you set without "dot" it goes ok and everything perfect.. So I set everythink in solid number (MM) and going to share for all of you (obs: I set probe and thick to 0 as I use outside). Just change this values on the first part (you can only change the Varprobedia, but I prefer do everything without "dot": FOR: -X -Y X and Y: VarMaxDistance = 25 VarFeedRate = 127 VarStandOff = 2 VarProbeDia = 0 VarGageThick = 0 --- FOR EXTERNAL (circle or not)): VarMaxDistance = 25 VarFeedRate = 127 VarStandOff = 2 VarProbeDia = 0 VarGageThick = 0 VarApproxSpan = 0 VarSafetyGap = 6 --- FOR INTERNAL (circle or not): VarMaxXDistance = 147 VarMaxYDistance = 223 VarFeedRate = 127 VarProbeDia = 0 VarGageThick = 0 Hope I help you on something.
@ViceFiori-t7y2 ай бұрын
Btw, I using a RNR ecomotion USB
@sunny5rising2 ай бұрын
Interesting. Thank you for the information.
@ViceFiori-t7y2 ай бұрын
it´s 2024 now, someone discover how to fix the "-X -Y" that read x10 problem? I love this script but whatever I try, I cant figure out.. X and Y are ok, but -X -Y have this problem on USB version
@sunny5rising2 ай бұрын
Hello, I can email you edited scripts. Email me at [email protected] and explain your exact issue. Any screenshots would be a big help.
@BipinBabu-k4c2 ай бұрын
I suggest a project Explaining the Tool Change Macro with only 2 or 3 tools listed. From Starting to End. I have not still been able to understand that core concept yet. If you are interested in future, may be..! Below concepts are still unclear at least to me..! 1 Saving the Point at which the Spindle Stopped, when a tool change command is found in Gcode, to return after changing the tool..! 2 Combination Of "T" Number and "M6" and "M5" Codes , How it is executed..! 3 Setting Tool Change Locations 4 Docking the Old Tool (Its Location and Movement during and after that) 5 Getting the New Tool (Its Location and Movement during and after that) 6 Drawbar Operation Concept 7 Length Compensation..etc I think it is a vast subject for a series of Videos..! Not easy I know..! I hope more people are interested in such information from knowledgeable people like You.! Spoiler alert..! By the way I don't think that I am going to fully understand it even if you invest some valuable time for that..!
@sunny5rising2 ай бұрын
Some of that information I should be able to do a video on. I'll add this to my video list. Thanks for the idea.
@BipinBabu-k4c3 ай бұрын
I am Thinking that Using the old parallel port is much better than using USB..! I don't know how right I am..! Such a thought in mind that parallel port is much more immune to external High Frequency Noise from VFDs/Spindles/Motors..etc I have seen videos where people say Ethernet controllers are not easily available here in my region.! or skyhigh expensive..!
@sunny5rising3 ай бұрын
I have heard that with USB, but I have no experience with it. My experience is with parallel port for my CNC.
@BipinBabu-k4c3 ай бұрын
Wow..! Glad to see You Back.!!! Your Tutorials were GEMS..! Educate us more Please ..! Followed..!
@sunny5rising3 ай бұрын
Thank you. Glad you enjoy the videos. More are coming.
@RAFACNC1003 ай бұрын
Exelente Charlie
@sunny5rising3 ай бұрын
Thank you.
@sabrizakaria59983 ай бұрын
I love your way of explaining and I like to see you making video about how we can setting up a fixed z probe in mach3 which it go automatically measure z axis on a fixed z probe thank you very much ❤
@sunny5rising3 ай бұрын
Thank you, and thank you for the suggestion. Just added it to my 'to-do' list.
@sabrizakaria59983 ай бұрын
@@sunny5rising thank you and m waiting for it 😁
@mecanizadosgrela73803 ай бұрын
Thans for this video!!!
@sunny5rising3 ай бұрын
You're welcome.
@gilleshenri95293 ай бұрын
Hi as usual, your videos are very interesting can't wait for the next one ++ gilles
@sunny5rising3 ай бұрын
Thank you! Glad you enjoy them.
@BrilliantDesignOnline3 ай бұрын
Charlie, I use your Auto-Z ALL the time. A really nice feature is during an op that requires a toolchange, while the program is paused, I can change out a tool in a collet, Run the Auto-Z to set the tool length, use the arrow keys to move around and/or issue commands, and when I hit cycle start, the tool returns to the next step in the program from wherever, just like it was never interrupted (not having an ATC). You have saved me HOURS of time with your help. I look forward to editing my screens, because this vid is a wealth of info, and I have downloaded it for a reference. Personally, I think Mach3 is great and cannot imagine Acorn or LinuxCNC being better in any way. And this vid just makes it better! Thank you.
@sunny5rising3 ай бұрын
Excellent! Glad you are getting good use of the Z script. I agree, Mach3 is great and the customization is awesome.
@leavethemkidsalone8603 ай бұрын
Any thoughts on a cracked off spindle for the pump? Belt can't move without the spindle.
@sunny5rising3 ай бұрын
Your best bet is to replace the pump.... instead of trying to fix the spindle.
@leavethemkidsalone8603 ай бұрын
@@sunny5rising thanks. You are fast!
@leavethemkidsalone8603 ай бұрын
Wonderful video!
@sunny5rising3 ай бұрын
Thank you. Hope it helped you out.
@andrewhumphreys39113 ай бұрын
Hi just paint it on rim with wheel in place both sides but gas in the tire blast on then you are ready to go , it will not leak done hundreds of tires like that
@jasospicassos52303 ай бұрын
It has been extremely hard to find a video with all the great information you have shared with us! Thank you so much 12 years later!!
@sunny5rising3 ай бұрын
Glad you enjoyed the video. Thank you.
@nothankyou2.04 ай бұрын
Hey there, could you show a script for auto homing, but the machine will back off the limit switch by 1 inch (or any distance).?
@sunny5rising4 ай бұрын
I have a way to do it if you're using Mach3's standard Homing sequence instead of the RefCombination as shown in this video. Email me at [email protected] and I'll send it to you to try out.
@TheCNCDen4 ай бұрын
You may wish to edit the home screen too, to enable the digitise button LED on the main screen when you test it before using, saves switching screens.
@sunny5rising4 ай бұрын
Absolutely!
@TheCNCDen4 ай бұрын
@@sunny5rising Sounds like the subject of a video, right up your street.
@sunny5rising4 ай бұрын
Definitely. I actually started the works on making a video about this a little while ago, then had a computer crash. Thank you for the reminder. :) By the way, I also have the Digitize LED on my Offsets screen as well. Makes life easier.
@TheCNCDen4 ай бұрын
@@sunny5rising Great idea, I hadn't thought of that, I may have some time later to add that.
@fredyyulyanto88835 ай бұрын
Nice sir..😊😊
@sunny5rising5 ай бұрын
Glad you enjoyed it. Thank you.
@blackkimba20795 ай бұрын
Really........ You go to music........... What a fricking asshole
@Baumi3336 ай бұрын
I have got a problem. I have got an input signal and the sript works. But if I run Autolevel, the z-does not stop. I have a USB controller board. What can I try to get the sript working correctly?
@sunny5rising6 ай бұрын
Just to be clear... My Z-Script is for helping to set Z-zero, not Auto leveling. Do you use a separate script for Auto leveling? Just trying to understand your question.
@Baumi3336 ай бұрын
@@sunny5rising Oh, ok. I understand you. Yes, I have a separat Auto leveling script for all axes. I wrote you an e-mail. Hopefully you can help me.
@rayleblanc72096 ай бұрын
An easier way is to wire them all in series that way you use less wire and only need one input .
@sunny5rising6 ай бұрын
Yes, that will also work. If, however, you want to use the RefCombination() Function (as seen in one of my later videos), you will need the individual inputs for the homing switches.
@rayleblanc72096 ай бұрын
@@sunny5rising You don't need individual inputs for homing. I have 2 CNC's set up that way and I can Reference All Home with single input.
@sunny5rising6 ай бұрын
Yes, you are correct. We agree. I was talking about RefCombination, not RefAllHome.
@rayleblanc72096 ай бұрын
@@sunny5rising I haven't tried setting up that way.
@ArcAiN66 ай бұрын
i know this video is old af, but i was wondering if you had a script that would soft-start a DC motor that's attached to the BOB and uses PWM (pin 1, not the 0-10v header)
@sunny5rising6 ай бұрын
Not quite sure. I'd have to learn about it and experiment with it.
@vahidinibrahimi7136 ай бұрын
Hi, is it the same way with AC Servo?
@sunny5rising6 ай бұрын
Not exactly sure since I haven't messed with them.
@jean-philippedaneluzzi31517 ай бұрын
hello, great video is very interesting, I downloaded the install scripts and I have 3 scripts that do not work. I have mach3 3.043.66 First mistake "Y positive" error line 121 type mismatch" the second "X positive error line121 type mismatch" and third "external center error line 286 type mismatch" do you know why Thanks a lot
@sunny5rising7 ай бұрын
jean, if you would... email me at [email protected] and tell me the script versions (Revisions) that you are having trouble with and well work to resolve the issues.
@ThePekeTsu7 ай бұрын
Thanks for this informative video! Question: when I try to run the script, my z-axis goes upwards, not down. What should I change?
@sunny5rising7 ай бұрын
You're welcome. If you haven't tried both the v12 and v22 scripts, give the other version a try and see if the issue persists. If it does, let me know and we'll figure it out.
@pekkakoo56947 ай бұрын
@@sunny5risingFor some reason, I had to add -1: Code "#100=" &VarMaxDistance * -1 Now it works perfectly!
@sunny5rising7 ай бұрын
Excellent! Glad you got it working.
@thanhvannguyen3077 ай бұрын
Hello. Can you help me with the change spindle section in the Macros section? I want to use the A-axis as the spindle.
@sunny5rising7 ай бұрын
Hello. If you can, email me at [email protected] and send photos or a small video of what you are trying to achieve. I may be able to help. I have kind of used my Rotary axis as a spindle before, but it was really just a GCode programming trick. Depending on what you are doing, this may help you too.
@raulmarin15448 ай бұрын
Hi charles I would like you to help me out please when I try auto tool zero it gives me an error saying error on line 1 argument not optianal hope you can help.by the way using z touch scrip v11
@sunny5rising8 ай бұрын
Hello. For v11, the first 8 lines are comments, so make sure the first character in each of the eight lines is an apostrophe ( ' ). If that doesn't solve the issue, links to versions 12 and 22 are linked in the description.
@PlaneOldGuys8 ай бұрын
I have been trying to get my Z probe working for months and finally your code did the trick. Thanks for the great video and explanation😃.
@sunny5rising8 ай бұрын
Excellent! Glad it worked for you.
@PlaneOldGuys8 ай бұрын
Thanks!
@sunny5rising8 ай бұрын
You are welcome and thank you!
@nealcooper2288 ай бұрын
Worked like a champ on on older Mach3 equipped Syil S7. It doesn't have an Automatic Tool Changer, so this will speed things up immensely. Thanks for posting this.
@sunny5rising8 ай бұрын
Excellent! Glad it's working out for you.
@oscarrubenbartz39269 ай бұрын
Hola... Tengo un placa mach3 la roja.. cargó el scrip y me dan error en la línea 54 ... También al inicio no puedo detectar automáticamente la 'probe ' si me puedes ayudar
@sunny5rising8 ай бұрын
Hello Oscar. If you will, copy the text from the script you are using and paste it into a text file. send it to me ([email protected]). I'm thinking something in the script is different than my originals. Line 54 should not be erroring out if it is the original... (Message "" 'CLEAR STATUS LINE TEXT). Also, tell me which Mach3 version number you are using.