Thank you Charlie, I have used both your probe scripts on my USB controlled router, I set the Z probe a earlier on in the year. and now the XY probe All working straight out of your script. With all the programming you have done, I very much appreaciate you sharing your knowledge with us, you have taken my experience with CNC's to the next level, TIp my hat to you.
@sunny5rising4 жыл бұрын
Very welcome.
@trav764576 жыл бұрын
These tutorials are, by far, some of the best I have found to date. Thank you sir, for taking the time to make these tutorials and supplying the script files.
@sunny5rising6 жыл бұрын
Glad you enjoyed them, and thanks for the compliments.
@shamimmoohebati4 жыл бұрын
Watched more than 20 videos and no one could explain better than you in short amount of time. Thumbs up sir
@Captain_Aubrey10 ай бұрын
Your videos are the best I have seen on KZbin for any subject. Getting re-acquainted with Mach3 after a few years, you have given me a jump start that was much needed! Thank you!
@sunny5rising10 ай бұрын
Thank you. Hope the scripts help you out.
@pmsilvei2 жыл бұрын
Thank you Sir! Laughing of your own mistakes is so refreshing... Made me get through my last Sunday crash, when I forgot I was zeroing the part on WCS10 and CAM job was set to run on WCS1 🤭😅
@mickemoe44768 ай бұрын
Excellent tutorials! After 5 years and far away (Sweden), Your work is still seen and appreciated. And it works with USB-connected computers as well. Thank You very much, for changes for the better!
@sunny5rising8 ай бұрын
Thank you! Glad you find them useful.
@MrSkeeteman696 жыл бұрын
Awesome and humorous tutorial. This should get me on my way as a newbie to cnc. Thanks a great deal. And keep up the great job of providing these videos.
@sunny5rising6 жыл бұрын
Thank you, glad you enjoyed it.
@dse-elektronik3 жыл бұрын
There is a year 2021 and this is the best tutorial. I watched a lot on YT and is best explanatory. Thank you and greetings from Poland
@sunny5rising3 жыл бұрын
Thank you. Glad you enjoyed the video.
@andyhamel49103 жыл бұрын
I agree with the users below, the most helpful video I have found for setting up my cnc tool zeroing. The files provided are fantastic 👏. The user comment on USB connectivity was really helpful too. Thanks
@bweber02045 жыл бұрын
Not sure if anyone commented on whether or not this script works with USB controllers or not but to answer that is yes. Works great! I have a Gecko G540 and a UC100 USB controller. Only differance i found is that Mach3 won't auto detect the input. If anyone would like more information on how I did it feel free to message me. Awesome Video as always Charlie. What would we do without you!
@Dark_Phoinix4 жыл бұрын
I HAVE THE SAME BUT WORK RANDOM AND VERY DANGEROUS! CAN YOU HELP ME?
@randywetzler59762 жыл бұрын
Thanks for providing these scripts Charlie, worked great and the audio files are a neat addition. I can confirm these scripts worked fine on my Chinese CNCEST 6040 CNC on MACH3. When using my Digitizer type probe I just have to switch the "Active Low" setting switched to "On" vs. "Off" for using a Touch Plate.
@sunny5rising2 жыл бұрын
You're Welcome. Glad you are making use of them.
@fredyvasilev1495 Жыл бұрын
I love comedy and technology and you have combined them perfectly. Many thanks. Hopefully I will get some of my future friends to be like you At
@sunny5rising Жыл бұрын
Thank you for the compliments. Glad you enjoy the videos. It's fun putting them together.
@bob-baumeister21145 жыл бұрын
i have found this instruction Video as blind Chance. i have downloaded the scripts and entered them in my mach3. i pimped them with my Settings and with german info notes in the scripts. it's working great. thank you very much!
@nohandscncmachines38044 жыл бұрын
Have to give a Huge shout out to this channel. This guy knows his stuff !!. The scrips he writes are on point!! they are the leader in today's market!!. The video edition and editing are cutting edge. This channel is a must for every DIY KZbinr with a CNC Machine !! Hit that Subscribe Button, Tell your friends. Two Thumps up !!
@xxxxin14 жыл бұрын
finally got my 3040 workings after making my own home and limits switches after seeing your video on the subject so happy that i know have a functioning machine with a probe that works now about to try your edge finder keep up the great work.
@MuhammadIshaq-sf4zh4 жыл бұрын
Hi Charlie, Thanks and Thanks, Many many thanks I would say it was full helpless from his side and I'm very impressed about his engagement. Many, many THANKS to Charlie! Great work. God bless you
@stylusptk3 жыл бұрын
Fantastic Job! Thanks so much for taking the time to make it and the scripts!
@sunny5rising3 жыл бұрын
You're welcome
@mamoshimamoshian90783 жыл бұрын
Heeej Charlie. I have to thank you because your video's had me really going. I learned alot from you. I do hope that you consider to come back to the youtube soon. And I wish you the best of luck, Good fortune and most of all GOOD HEALTH. GOOD LUCK......:)
@ea3de6964 жыл бұрын
Mr Charlie, thank you very much. I admire your work and thank you for sharing your knowledge with us. Greetings and good health
@mannih98735 жыл бұрын
Thanks Charlie, Very cool way finding zero, also it works perfect with USB controller.
@sunny5rising5 жыл бұрын
Thank you for that.
@Dark_Phoinix4 жыл бұрын
you have mod the script?
@philb14664 жыл бұрын
Fantastic Job! Very entertaining and informative video. Thanks so much for taking the time to make it and the scripts!
@ModelMaker3054 жыл бұрын
Fantastic Job! Very entertaining and informative video. Thanks so much for taking the time to make it and the scripts! You're awesome! These worked perfectly for my machine. You saved me so much headache. I am using a Gecko G540 controller and these work very well. Thank You
@sunny5rising4 жыл бұрын
Thank you. Glad there scripts are working for you.
@recordingwhiz5 жыл бұрын
I have to say, you make the Best Mach 3 videos I have found so far as far as explaining how to use the scripts in the touch probe. do you have a patreon? and I love the humor
@sunny5rising5 жыл бұрын
Thanks for the compliments, Gerry. No, I haven't set patreon up yet.
@roberthodges35223 жыл бұрын
Hi Charlie I had subscribed to your channel a long time ago because you explain things more clearly and you also demonstrate what is meant to happen. I also like the humor. I hope you come back soon and do more. If not then I wish you all the best of luck and thanks for sharing your knowledge with us all.
@sunny5rising3 жыл бұрын
Hello Robert, Thank you for the support. I do have several detailed CNC videos in the works. :)
@roberthodges35223 жыл бұрын
@@sunny5rising Top stuff. This script works well with USB interface which I'm very happy with. Looking forward to your next videos 👍
@sunny5rising3 жыл бұрын
Awesome! Glad it worked out.
@yousuck55603 жыл бұрын
Just want to say this program runs great. I’m using a UC100 And everything works great once I figured out how to make it work thanks
@heliocorradinfilho99983 жыл бұрын
The below error is the only one I see! Fantastic job, thanks a lot per shaearing your work and idieas.
@deanrichards95415 жыл бұрын
Where have you been all my CBC life. You make it so easy to understand and to share your script is a real bonus. Thanks very much. Don’t suppose you have a scrip or screenset for an ATC? This is my next big hurdle. Thanks, Dean. P.s. I haven’t tried to download the files yet but will try tomorrow. I see some people have had problems.
@sunny5rising5 жыл бұрын
No, I haven't yet written an ATC script. Started writing a manual tool change script with auto tool setting, but haven't finished it yet.
@deanrichards95415 жыл бұрын
@@sunny5rising Thanks Charlie, I'll keep a lookout in the future. Keep up the good work. Thanks, Dean
@ElefantXPS6 жыл бұрын
Tested and working with an Ethernet SmoothStepper and a digitising probe. Thanks for all the hard work.
@sunny5rising6 жыл бұрын
Awesome!
@markmcguire63053 жыл бұрын
Great video! Very easy to follow and set up. If you use and XBox 360 controller to jog your machine, you can program the buttons as well. I almost always set 0,0 at the bottom left, so I renamed the Minus X and Minus Y files to XBoxBtn1.m1s and XBoxBtn2.m1s and chose those options for the B and Y buttons in the Plug In configuration drop down menus. Can't edit the bit width and such, but I plan to always use a 1/4" steel dowel to locate the X and Y.
@sunny5rising3 жыл бұрын
Awesome! Glad you found the scripts useful.
@metalmickyturnson4 жыл бұрын
Charlie thanks very much for your work. I am using the Z axis setting and its brilliant. Many thanks. I am going on to the x,y set next. Many thanks and stay safe. Mike. UK.
@sunny5rising4 жыл бұрын
Awesome. Glad it's working for you.
@mtabernig3 жыл бұрын
Thank you very much.... the scripts are very good I am enjoying using and shoeing them. the voices are a touch of class. I change one by issuing a warning instead of a count. Good job!!! and Thank you again. Next time I like to find a script were the X,Y andZ get in position to change the tool and after a one key stroke, return to the right point and continue working.
@sunny5rising3 жыл бұрын
Glad you enjoy the scripts. I might just be about ready to write a script like you mentioned. Would make life easier for sure.
@mtabernig3 жыл бұрын
@@sunny5rising There is one thing that i could not figure up. when traying to find the center exterior of the part about to machin, The box opens and ask for the span of the part. I can put 0.05 or 5 and makes no difference it always moves about 6 inches before it drops and try to contact the part but obviously it is too far away and stops. Is there something I am doing wrong?
@sunny5rising3 жыл бұрын
Is there any way that you can take video or step by step pics as you go through the process? It will help. You can email me the pics at sunny5rise@gmail.com, or upload a video to youtube and send me a link.
@dannapert41994 жыл бұрын
You're awesome! These worked perfectly for my machine. You saved me so much headache
@sunny5rising4 жыл бұрын
Awesome!
@dannapert41994 жыл бұрын
@@sunny5rising how did you learn to program mach3? I'm interested in learning myself
@sunny5rising4 жыл бұрын
Apologize for the late reply. I have several pdf files on Mach3 programming... g code, macros, and Scripting. email me at sunny5rise@gmail.com and I'll send the files if you want them.
@paulscarrestorations5466 Жыл бұрын
You sir are a magician! Love your work!
@sunny5rising Жыл бұрын
Thank you. Glad you enjoy it. Abracadabra! :)
@whoryou11315 жыл бұрын
Thanku Charlie it works with usb
@JOHNSMITH-ug2mt4 жыл бұрын
The Zed Axis zero works great on a USB machine! Thank you.
@saylllo Жыл бұрын
Hello, you are n. 1 !!!! Excelent video with explication.... EXTREME HEPLP for me!
@sunny5rising Жыл бұрын
Thank you. Enjoy the scripts!
@fredfarnackle54553 жыл бұрын
Another excellent video. Many thanks! 😎
@sunny5rising3 жыл бұрын
Glad you enjoyed the video.
@jerrylyaw6 жыл бұрын
Awesome and humorous tutorial! Thanks Charlie!!
@sunny5rising6 жыл бұрын
Very welcome!
@rickmccaskill78884 жыл бұрын
Great video. Thanks for sharing. Will but on mine today. Thank you.
@shaali49006 жыл бұрын
Thank you so much for the tutorials, I setup the script with you brilliant instructions on a USB driven machine. Scripts are very touchy to say the least :) they work 50% of the time perfect. but other 50% they have broken bits and rolled away with the part :). Not sure what the problem is.
@sunny5rising6 жыл бұрын
I'm not sure, but it sounds like there is a bottle neck in your system when it comes to the probe signals. Possibly the USB connection itself.
@shaali49006 жыл бұрын
There is virtually nothing running on machine except Mach3. I checked the resources, look good. I also tried different USB cables and ports. The Auto Z script, from time to time, after touching the plate, will push the cutter down a mm and then goes to z safe.
@sunny5rising6 жыл бұрын
The computer dedicated to my CNC is pretty bare as well. For the z script, try increasing those Sleep delays I mentioned and sees if that helps.
@Dark_Phoinix4 жыл бұрын
i have broken 2 tools not work full buged!
@mattivirta Жыл бұрын
@@Dark_Phoinix why use first test run real bit, need use first test cheap metal rod only. if all working well then can use bit. lot lot cheapen than broken many bit.
@ricardomourita18235 жыл бұрын
This is so awesome!!!!!! I stumbled on this channel and I do like it a lot! :)
@sunny5rising5 жыл бұрын
Thank you.
@ricardomourita18235 жыл бұрын
@@sunny5rising No thank you for giving us such good content!!!
@FranciscoSilva-fe5sy4 жыл бұрын
Muito obrigado. Resolvi um problemão. Adorei a musiquinha e o seu sorriso. Parabens!!!!!!!
@sunny5rising4 жыл бұрын
Muito obrigado. Thank you.
@alanwood35976 жыл бұрын
Hi Charlie, me again. I installed the edge finder scripts and these also work fine except if you accidentally leave the screen in machine coords. No matter which script you run it then causes a Y negative travel. Machine is a small CNCEST with RnR controller card. The scripts are quite useful for calibrating the X and Y movement. I bolted a 150mm parallel on the table in X and then Y and ran your scripts to find the edge of the parallel. After each script had finished I flipped to machine cords and noted the reading and then did the maths of the subtraction of the + and - readings and also subtracted twice the tool thickness. Having got an answer to the maths I fed this into the first calibration dialogue box where it asks for the distance wanted to move and then put 150mm into the second dialogue box to give the actual distance travelled. That probably is badly explained but I think you will get the gist. I did a similar routine on the Z using the tool height setter with and without a 1-2-3 block difference in height. I have also made a 3mm probing rod out of silver steel and put an insulated shank on it so I can using the tool setting pad in either mode depending on whether the job is conductive or non conductive. The only thing I have done different to your videos is put all 6 newly installed limit switches in series into one input on the RnR card. The software knows if it is doing a machine zero use of the switches or a limit action by virtue of the status at the time. Again badly explained ...
@sunny5rising6 жыл бұрын
Did the calibration work out ok? If i understood correctly, i think you should only need to subtract the tool diameter once (per axis) in your calculations or tool radius twice. Haven't yet set my machine back up since the hurricane here in NC, but when i do, i will test the machine coords issue. Just been busy helping folks clean up and repair around here.
@alanwood35976 жыл бұрын
Hmmm ... you have got me thinking now. I have the probing backoff set to 1.5mm and I had a 3mm diameter probe. So what I really meant was 2 x backoff plus 2 x tool radius which I mentally was thinking as twice tool diameter which is technically a wrong way to describe it .... I just did an edit to the Mach3 operational screen by adding a LED next to the tool height button so you can see/test the probing contact. Found instructions on CNCnutz (Peter Passuello) KZbin site. It saves having to flip screens when testing the contact. Some pretty raw pictures of the hurricane shown on UK TV so good luck with the clean up.
@sunny5rising6 жыл бұрын
Interesting about the LED. Thanks for the tip. I'll have to look into that.
@WakaTattoo5 жыл бұрын
www.dropbox.com/s/ryqnuv9mjnly769/External.txt?dl=0 Eliminate the tenths and the format of the data on line 218. It is what gives the problem is not a definitive solution, if someone can fix the problem of the format I thank you. That way it works with whole numbers.
@yvonnebotha6643 Жыл бұрын
Great couple of videos! But there seems to be a bug in the Circle calculations for Diameter... In both Unit cases The code should be: VarSpanDia = Format((VarSpanX + VarSpanY)/2, "##0.000") 'CALCULATE DIAMETER another set of parentheses need to encompass the (VarSpanX + VarSpanY) before the division. Case 0 'BOTH Select Case GetParam("Units") 'SET INFORMATION FOR STATUS LINE DISPLAY Case 0 'MM VarSpanDia = Format(VarSpanX + VarSpanY/2,"##0.000") 'CALCULATE MM DIAMETER VarSpanDiff = Format(VarSpanX - VarSpanY,"##0.000") 'CALCULATE SPAN DIFFERENCE Case 1 'INCH VarSpanDia = Format(VarSpanX + VarSpanY/2,"##0.0000") 'CALCULATE INCH DIAMETER VarSpanDiff = Format(VarSpanX - VarSpanY,"##0.0000") 'CALCULATE SPAN DIFFERENCE End Select
@sunny5rising Жыл бұрын
Thank you for letting me know about this issue. As you stated, a bug is present in the calculation. I did some testing and can't believe I didn't catch it before. Thankfully, this is the only version with the issue. It has now been fixed and uploaded in the new zip file XY_TOUCH_SCRIPTS_2b (link in description). The new Internal Center script is Rev15b. Though I repaired the calculation differently than you did, I thank you for your input.
@brucewilliams62923 жыл бұрын
Fantastic! Thank you very much! Subscribed!
@bartmarge82995 жыл бұрын
Fantastic works perfect, few adjustments with feed rates but awesome. Well done Charlie. Used Rev-12 for center, Rev 14 doesn't seem to work as well with my machine 6090 but will look at refining when I have more time. :-) :-)
@laiminhluan4 жыл бұрын
Sir! thank you so much. I admire your work!
@sunny5rising4 жыл бұрын
Thank you.
@nohandscncmachines38044 жыл бұрын
Hope you dont care. But I posted link to this video on my CNC Channel in the Comment section. Very useful info. Thank You so Much !!
@sunny5rising4 жыл бұрын
No problem. Saw your recent video you uploaded for your friend. Glad to see the scripts are working out for you.
@nohandscncmachines38044 жыл бұрын
@@sunny5rising Thank you so much. Just trying to help a friend. You do know your stuff and your scrips rock. Big time saver on the auto z axis when changing end mills. Just wish I have the money to buy new instead of making due with DIY and home made. But love your channel and videos. Will plug it every chance I get as you ROCK !! keep it up.
@lantechbd5 жыл бұрын
You are the great real hero! Thanks a lot. Respect always!!!!!
@sunny5rising5 жыл бұрын
Glad you enjoyed the video. Thanks.
@juanpabloramirez65655 жыл бұрын
Thank´s Charly for scrips, i receive today will load.
@michelcleynen66383 жыл бұрын
Incredibly well explained. Tried several scripts from others, but yours works perfectly. Except "center internal" returns an error on line 115. Probably my mistake, will try again later. greetings from Belgium (Hellhole ....;)) I Have you deposited a present. greetings and thanks thick thumb
@sunny5rising3 жыл бұрын
If you still have issues with the script, contact me at sunny5rise@gmail.com and we'll look into it.
@luislanga Жыл бұрын
I tried this on my machine and got a few errors on Mach3 v3.041. After reverse engineering the whole script I found out all I had to do was change my VarStandOff, VarGageThick and VarProbeDia to whole numbers, as "VCATCH" was returning the operation between these variables with a decimal point and mach3 apparently didn't know how to input decimal values into my xyz coordinates, the first time I tried it I got -28715 or something like that, good thing I have limit switches, cuz I sent it g0x0y0 before checking where the machine thought it was. I guess it could be easily fixed if you don't have a whole number diameter probe, but I don't want to read through VB script or Mach3 documentation right now. Thanks for sharing, Charlie!
@sunny5rising Жыл бұрын
Thank you. Sorry you had those issues, but glad you got it figured out.
@speppino5 жыл бұрын
Hello Charlie, I tried your script with a 6040 Router from ChinaCNCZone. This has a USB controller and none of your script work or some partially worked but then I could not repeat the results more than once. In addition I got many errors. In particular, when I run the edge finder I get " Maximum travel reached...." which I tried multiple distance but still the error pops up. but this error in not consistent and once or twice I was able to succeed but they the DRO was not peftectly zero after the measurement, but x was +12 microns and Y +19 microns on the display. but after I was not able to measure it anymore. The error keeps coming back. For the " external center finder" I get the same error right after the probe touches the first side. Once I was able to touch one side and when the probe went to the other side it stopped giving me an ( Hope I remember correctly 322). For the "internal center finder" in a circle ( i checked the circle option) the probe touches one side, goes rapid in the starting point, moves to the other side and after it touches goes rapid back to the opposite diameter and it stops with an error "error on line 277 -Internal error . In addition a couple of times once it stopped, the machine started moving again on its own with no reason. fortunately at very low speed......it is scary and fortunately I used foam with aluminium tape to test all the options. Unfortunately nothing works or is extremely inconsistent and dangerous to test on real parts. I hope you can find the magic solution for this. Thanks a lot for your hard work.
@spourabbas Жыл бұрын
Great Video. Very instructive! 😀
@sunny5rising Жыл бұрын
Thank you. Hope it helped you out.
@carlosgarza66415 жыл бұрын
Thank you Great tutorial Works GREAT!!!!!!!!!!
@tepansenteolt29806 жыл бұрын
As always, excellent 😃✅👌
@sunny5rising6 жыл бұрын
Thank you
@ernestw13 жыл бұрын
excellent tutorial can't wait to try this out thanks
@sunny5rising2 жыл бұрын
Have fun!
@steam_fan4 жыл бұрын
excellent, thanks very good video and very clear instructions
@whoryou11315 жыл бұрын
Starfield like in the milky way. Charley im running the script with the 3020usb mdk2 bob and the escape on keyboard function to terminate the script works only after it touches the ground on touchplate. The message listener reads "Esc or stop terminating script" My other usb maching stops immediately. Thanku for your energy on these videos! Atta boy starman!
@postiemania2 жыл бұрын
I have to try this, thanks Charlie
@sunny5rising2 жыл бұрын
You're welcome.
@Sugiyanto-kc3xs4 жыл бұрын
clearly tutorial. learing by happy. excellent. thanks
@DGAWDGAW Жыл бұрын
Thanks a lot for this tutorial and the scripts provided. You explain things clearly and sucintly without mabo jambo. I use the previous Z one from you and it works like a charm. Now I am going to incorporate these as well. What will be next? A script for setting the three axis at a time would be great. I would try to put together this +x , +y and Z from the previous video to use with a 3axis touch plate but my knowlegde of Gcode and VB is nil so I do not dare to.
@sunny5rising Жыл бұрын
Thank you. Glad you enjoy the scripts and videos. I have had several requests for a 3-Axis script. It is on my list. Since you asked what's next... Currently, I'm working on a probing script for setting Coordinate System Rotation Angle (G68). This will probably be released somewhat soon... still testing. Thanks again.
@zsquresh5 жыл бұрын
Very well presented tutorial. You are great!
@fredmartinez9334 жыл бұрын
thank Charlie for the info..
@sunny5rising4 жыл бұрын
Very welcome.
@diytv26065 жыл бұрын
Great Video, Thank you so much
@YiannisQq4 жыл бұрын
Awesome work.Thnks!I run with usb and all is ok except for the external center that i get a error on line:109-Type mismach.I really have no idea why
@sunny5rising4 жыл бұрын
In the 'External Center ' dialog, make sure the Safety Gap field has a period (.) in it instead of a comma (,) before pressing 'OK'. This should take care of it.
@YiannisQq4 жыл бұрын
Yes that did the trick.Now everything works great.Thnk you very much
@heshamaboghanima94865 жыл бұрын
Excellent and wonderful thanks
@sunny5rising5 жыл бұрын
Thank you
@sniperht14 жыл бұрын
it's wonderful script, thank U so much :))
@sunny5rising4 жыл бұрын
You're welcome.
@jpgmoreno4 жыл бұрын
Thank you, i was looking for a script like this
@sunny5rising4 жыл бұрын
You're welcome.
@gillesst-onge2 жыл бұрын
Nice job!
@sunny5rising2 жыл бұрын
Thanks!
@julioruiz28174 жыл бұрын
Hello, excellent information, thanks for sharing. One question, what controller card do you use in your cnc of this video?
@keithcrow80172 жыл бұрын
Great tutorial. thx
@sunny5rising2 жыл бұрын
You're welcome!
@puchupulero5 жыл бұрын
Thanks Charlie, you are genius!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@sunny5rising5 жыл бұрын
Very welcome.
@michaelmiller33594 жыл бұрын
Excellent video you rule
@DavidBornstein Жыл бұрын
Hi Charlie. Good news! Your script works beautifully with an Ethernet connected machine! One question though, on the “offset” page, do I need to enter any figure in the Z offset? The thickness of my touch plate for example? Or, do I just leave it on zero? Thanks, you are a star! David
@sunny5rising Жыл бұрын
David, Excellent! Glad it worked out. You do not need to add anything on the Offsets screen for Z when using my Z script. My XY scripts do use that DRO field only if you want to use a different "Gage Thickness" other than the Default you set in the XY scripts. That "Set Z" button is only used if you want to use Mach3's default action with setting Z.
@danieldunham99785 жыл бұрын
Very good work!
@sunny5rising5 жыл бұрын
Thank you
@markohoepken14234 жыл бұрын
Very nice! Thanks.
@motodv8moto531 Жыл бұрын
I run a warp 9 ethernet smooth stepper and it works great! thanks for the scripts! One thing i am struggling with is a Z height read out. I would like to run [Auto Tool Zero] it would set the DRO to 0.000....then a big then, i would like to call up a fixed location using machine coordinate and touch off on another plate that is permanently located on my bed. The have the dimension/distance of Z height displayed in the status bar, as you did with internal center function. This would give the thickness of the work piece, i need to do this because my shop is never the same temp, i have a 4'X4' machine and it does expand and shrink....I have even set up an API laser tracker and it does flex up to 0.30 dependent on temp. If i had a script to touch off on top of the work piece then touch off on a fixed location on the bed, then spit that dimension out....man that would be awesome!! still trying to fungible through it but i am struggling...haha...thanks again for the video and scripts, if you get board can you please help me with this.
@sunny5rising Жыл бұрын
Hello motodv8 moto. Sounds interesting. email me at sunny5rise@gmail.com and send me what you have so far (the script, if you've edited it) and information on what you are struggling with. We'll go from there.
@lefterovidiu15775 жыл бұрын
Very interesting video "Edge / Center Finding (X / Y)" and "Auto Tool Zero (Z Axis)"
@50315943 жыл бұрын
brilliant tutorial Charlie Is there anyway that can get it to run on mach3 turn. it it runs ok but will not stop on contact with the part
@Mara2000sdf15 жыл бұрын
For others who have issue with error on line 130, related button X- and Y- : SetOemDRO(800, "-" &VarStandOff + VarGageThick + (VarProbeDia/2)) 'SET X DRO The error caused this part of code: "-" & Error fix: SetOemDRO(800, (VarStandOff + VarGageThick + (VarProbeDia/2))*-1) 'SET X DRO Probably if you have configured oposite axis direction from standart setting (my case) in general Mach3 setting then code try write to DRO negative this cause error on line 130 Best Regards Marek.
@younglogin5 жыл бұрын
Thanks, for me it also only worked changing this detail, before making this change the system was assigning a wrong value to DRO
@kalleaix62385 жыл бұрын
what did you change in this row? i my scipts (downloaded 1 week ago) this row look exactly the same. only difference: in y scripts i find "801" in x script "800".
@younglogin5 жыл бұрын
@@kalleaix6238 My friend, I'm from Brazil, I'm sorry to use the translator, I made some changes to the files that Charlie made available because the originals did not work well on my machine, they were some lines that I can not remember unfortunately, I remember a major change that was the unit of measures of my windows from "." to "," in the decimal separator, is that in my country the unit is the opposite of the American system, but to help you I can send the files that I use in my machine, just leave your email that I am helping you, I am very grateful for the help of Charlie and I'm glad to be of use to you, then you just have to take a look at my code and see what works for you
@svitalijm4 жыл бұрын
Young witalij@rambler.ru
@ismailmallick86816 жыл бұрын
many thanks once again
@gorakhpur28925 жыл бұрын
Very helpful thanks alot
@rajaneize11 ай бұрын
Hi Charlie, best work is yours automated tool setting. I am beginner in that world, can I have your good scripts for update my selfmade cnc ? Thanks. Best regards
@sunny5rising11 ай бұрын
Hello. Yes, the link for the scripts are in the video description.
@emrahcivitoglu92994 жыл бұрын
hi, your viedeos is helbful. A Question? Can you post a auto tool setting with fix position z toll length? thanks
@user-cs9mo9um5n23 күн бұрын
Ok, I find a way to solve the problem without any modification for you guys who using usb: If you have problem on -Y and -X with 10x more numbers (like 320mm) it´s JUST the "VarStandOff" on the start. I dont know why but cause this issue if you set at "1.27" but if you set without "dot" it goes ok and everything perfect.. So I set everythink in solid number (MM) and going to share for all of you (obs: I set probe and thick to 0 as I use outside). Just change this values on the first part (you can only change the Varprobedia, but I prefer do everything without "dot": FOR: -X -Y X and Y: VarMaxDistance = 25 VarFeedRate = 127 VarStandOff = 2 VarProbeDia = 0 VarGageThick = 0 --- FOR EXTERNAL (circle or not)): VarMaxDistance = 25 VarFeedRate = 127 VarStandOff = 2 VarProbeDia = 0 VarGageThick = 0 VarApproxSpan = 0 VarSafetyGap = 6 --- FOR INTERNAL (circle or not): VarMaxXDistance = 147 VarMaxYDistance = 223 VarFeedRate = 127 VarProbeDia = 0 VarGageThick = 0 Hope I help you on something.
@user-cs9mo9um5n23 күн бұрын
Btw, I using a RNR ecomotion USB
@sunny5rising23 күн бұрын
Interesting. Thank you for the information.
@user-fu4ee4bu5y2 жыл бұрын
Thx a lot!
@sunny5rising2 жыл бұрын
Very Welcome!
@LarryJarrett Жыл бұрын
Hi Charlie; Your tutorials and scripts are out standing. I installed your (X/Y) edge/center program and I have an problem I hope you can help me with. When running the script to find center of part my system will find (X-) side then move to the (X+) side, drops down then move in the (X+) direction instead of moving to (X-) to find edge of the part. I’m running Mach 3 Ver R3.041 Thank:
@sunny5rising Жыл бұрын
Hello Larry. Thank you for the compliments. Since you're using an older version of Mach3, we may have to customize the script. Email me at sunny5rise@gmail.com and tell me which Revision of the script you are having issues with.
@shacharliberman50845 жыл бұрын
Here are links to the script files that Charlie sent me by email. hope this helps. megaupload.nz/U9647am1be/XY_TOUCH_SCRIPTS_zip megaupload.nz/d17070m8b3/Z_TOUCH_V11_zip
@jaimevillada91504 жыл бұрын
Kind regards from Colombia. Links are currently down. Could you share the documentation and files again? Thanks for your support and answer. Blessings in these difficult times.
@shacharliberman50844 жыл бұрын
@@jaimevillada9150 I'm probably not going to be at work for the next few months, so you got lucky that I saved the scripts in a shared folder! There's even a script there that I changed to work with the chinese CNC machine we got at work, might come in handy for you too! www.dropbox.com/s/dpog5be25sk1d32/xy_touch_scripts%20%26%20z_touch_v11%20cnc%20mach3%20scripts.zip?dl=0
@jaimevillada91504 жыл бұрын
@@shacharliberman5084 Muchas gracias por todo su apoyo. Desde Colombia, bendiciones de salud en estos tiempos difíciles.
@philb14664 жыл бұрын
@@@shacharliberman5084 Thanks Shachar! Really appreciate the link!
@ericallred57294 жыл бұрын
Great Videos and i really appreciate your level of detail, especially as a beginner. One note, the download links don't seem to result in the file being sent forward. Multiple attempts result in the site indicating my email is invalid. I checked both inbox and junk and tried with two different accounts.
@talgtalga37673 жыл бұрын
GREAT VIDEO !!! I LIKED AND APPPRECIATED. Just quick question when i run to check the edges what's feed rates needs to be for x and y axis and am afraid to heat the stock if not stopped during finding edges and center .. this tablet and carcodales stop the bits for sure >??? or need other setting to avoid crash in stock box ? sorry for stupid question i just worry about it i thought may be i missed something during the that video watching.... am just beginner that's way too much questions.))) hope you understand me
@sunny5rising3 жыл бұрын
Thank you. Glad you enjoyed the video. The feed rates in the scripts work fine, but you can change them as you wish. You will need to be sure there is conductivity between the probe/tool and part/touch plate. You can test this before running the script by temporarily jumping the contact points with a piece of wire and making sure the "Digitize" LED lights up upon contact. If you are not sure that there will be conductive contact or are afraid to run it, DO NOT RUN THE SCRIPT. Hope this helps to answer some of your questions.
@talgtalga37673 жыл бұрын
@@sunny5rising Thanks a lot for your feedback on it. I will run it yes i will test before running you are right...i have to be sure all is fine...Really great video enjoyed!!!
@Florecs14 жыл бұрын
I have two problems. When I measure positive values it displays them correctly (example 3.5000) and when I measure negative values it displays with commas after tenths (example 35.0000). The second issue is whether I can make changes to SCRIPT to not always replace the comma in the Safety Gap. I would be grateful for help. Thank you.
@pippibird74266 ай бұрын
Same problem. But i get -35000.0 instead of 3.5000. Factor of thousand.. don't get it
@Mara2000sdf15 жыл бұрын
Charlie, how did you electrically isolated the spindle from other parts of machine? My spindle is electrically connected with frame. Thank you!
@sunny5rising5 жыл бұрын
My spindle came already isolated, possibly because it's a DC brushless motor. That's my guess anyway. Others with your issue have made isolating probes or isolating plastic sleeves for their spindles specifically for probing.
@indianmaker18057 ай бұрын
yes its work witrh usb
@sunny5rising7 ай бұрын
Thanks for commenting. I have learned that some systems do have trouble with my scripts, but most of those issues can be recoded and fixed.
@sumerutechnologies65433 жыл бұрын
Hi Mr. Charlie, First of all thanks for your script and your effort. i am using Mach3 with usb control. unfortunately facing problem in probing. when i take external center x ,y After the probe touches the work piece, probe is moving towards x machine zero and continuing the probe activity. please help me. thanks in advance
@TomEF0361 Жыл бұрын
Hello Charlie, thank you very much for your scripts and your support for this CNC/MACH3 | Automated tool setting | Edge/Center Finding (X/Y) | Includes INCH/MM scripts. I have a question. Is it also possible to create a script to measure the workpiece position with "corner angle"? Angle of Surface?
@sunny5rising Жыл бұрын
Thomas, you're welcome. About the angle question... I am currently working on a probing script to set coordinate system rotation angle (G68). Not sure if that's what you are referring to.
@TomEF0361 Жыл бұрын
@@sunny5rising Yes Charlie, thats the right way what Im looking for. Have seen it on new Mach4 but I will not change my Running System :-) 1000 thanks for you work!
@ericgossard8808 Жыл бұрын
Hi Charlie. Quickly I've got --- Much, a c10 ver8.3 Bob, a Drewtronics s5000LED probe. What terminals do I need to hook up to on the c10 board. My guess is 5 V on the input strip and #10 terminal. I know this is very rudimentary but I just wanted tobe sure. My machine runs flawless and don't want to hurt it. Thanks
@sunny5rising Жыл бұрын
Hello Eric. I have not used that board, so I cannot verify if that is correct or not.
@stephensharma32593 жыл бұрын
I have a usb connected machine Can you help me on finding a tool zero script for it. my tool zero doesnt show pins under mach 3
@fredyyulyanto88833 ай бұрын
Nice sir..😊😊
@sunny5rising3 ай бұрын
Glad you enjoyed it. Thank you.
@stephansiepermann Жыл бұрын
thaks for the great video. though i have a problem. when i use the external center finder my routerbit wont finish above the center but just on the edge of the center. what could the reason be? (note...yes i have filled in the probe diamater an d i checked calibration.....) (note2... ihad the same with my z-height probe. i had to fill in 'wrong' numbers to receive it works correctly)
@sunny5rising Жыл бұрын
Stephan, email me at sunny5rise@gmail.com and tell me which revision of the scripts you are having issues with. Also tell me which variables you had to fudge.