You spray water on coffee beans. Will the internal parts rust?

Such a bad name.

The James Hoffmann covered the P1 extensively in a video on KZbin titled "The KinGrinder P1: Why A Cheap Hand Grinder Has Me A Little Excited".

Why mine gives me way less amount of coffee. After using it I looked and see there’re almost a lot remaining in the pod

I'm leaving this comment in case anyone needs some more tips in case the video is not enough for your problem. I have the same Nespresso machine and this video already saved me twice. Last time I had trouble brewing coffee I tried everything in the video, but nothing would work. I even cleaned the rotating component until there was not a single stain of coffee. It was until I heard the Nespresso was actually working but something was still interfering with the brewing. So I pressed the brew head slightly and it started working! In that moment I realized there was some coffee grain in the sealing ring. I just needed to get some water in it and with the heat of the machine the problem would be solved.

Does anyone else’s S3 have a bit of shaft play when manually rocking it back and forth? Mine does. I am a bit worried about it creating to many fines because of that? Should I exchange?

It Worked !!!!!! Thank you

There is a bottomless porta filter at the end of the video. Which ones are compatible with the Tuni E2?

Are you sure 20click kingrinder p2 is for espresso?

How much clicks for the bialetti mocca pot?

I bought one of those I had to send it back. It was so loud.

I bought the machine a few weeks ago and have the problem that my pressure indicator goes far into the red range with every extraction and stays there. Has anyone ever had this problem or can tell me a possible cause and solution?

How do you use the blind disk? I tried to use it, and the machine just made a pop sound and started spilling water from the sides of the filter basket. Thankfully it was in warranty period, and got it changed. As this machine is supposed to have an OPV, I don't know why it wouldn't release pressure instead of bursting everything out.

2x drücken?

Great comparison. How did the 2 shots compare?

Great video!! Which of all Timemore series would you recommend for the V60 method , French press, filter , Aeropress and kemex?

Thank you!

Needed this. Thanks ‼️💕

Thank you so much. My machine is working now after 6 months in the closet.

Nooo I wouldn't recommend spritzing in these Kingrinder hand grinders as many people have reported rusting due to it :(

i did all of that and it still won't work 😔

my spinning component don spinn🥹 i tried but it just won't move

Does the scale support Bluetooth connectivity? So I can connect to apps such as Beanconqueror, etc.

Pours 18g of beans through the grinder. Time all this is done only 11.3g is left in the portafilter ready to pull a shot🤣. Good video though.

Looks cheap

Fantastic review! Honestly a great video overall thank you!

Hi, i really can't get the timing good. I have tried different coffee beans, different grind size. Tried changing pre infusion time, etc. Within 10 seconds my coffee is 32g which is too fast, no matter what i do. Any hidden setting that you can recommend? It's H10B

btw any suggest the best grinder for pour over under $150?thankss

Best KZbin video Ever. Thank you! I hope that Nespresso hired you!

Thank you, it worked.

3:19 I'd recommend to give them a good shake after RDT to distribute the water and reduce the moisture that will remain in the grinder.

В чем разница между этим темпером и mhw armor series 2.0?

Love my K6.

rather than getting these accessories… I’d focus on exchanging the grinder first. 😭

That's my machine exactly

No one has ever explained why they spray their beans with water before grinding. I've always assumed that would just make it easier to Gunk up the system

this vs DF54 who wins?

As mentioned in Vedio is not correct left side coaser grind right finer change it in Vedio and repost please

Yeah that's how I wanna spend part of my coffee prep doing, turning the coffee ground catcher cause it was poorly designed

I have a different model, but have same issue - tried the same initial steps ... so, will try this cleaning process next ...

Thanks! Man, you saved me a couple hundred !!

Can you tell me the cup clearance please?

Thank you!!!

M1 or C2?

I am a beginner who has used several grinders. So I was looking for a grinder to use with the grinder I am using now. However, I only saw good reviews about this grinder. Maybe I was unlucky. T.T So I bought this grinder. And I disassembled and reassembled it several times. Things I realized during the process. I think it is too inconvenient and unsanitary for the price. First, the weight. It is too heavy compared to the weight of some high-performance hand grinders. Next, the screw lock on the powder container is too inconvenient. Third, it is too difficult to disassemble and assemble. And the fact that it is not recommended to wash it with water is a big disadvantage. I think the manual says not to wash it with water. Finally, it uses lubricant for smooth operation. It could be edible lubricant. However, there is no cap to prevent it from flowing after friction with the machine. I would recommend PORLEX instead. I have 2 of this kind now and gave 2 to my friends as gifts. This is really portable, lightweight, and has a simple structure that can be washed with water, and it seems good because it can even make ristretto powder. (I used Google Translate. Please understand.)

cuando le falla el lector de capsulas, existe reparacion?? esta cafetera da muchos problemas

Как ее отрегулировать на ноль после чистки?

Показали бы как настраивать после чистки?

Great video though i think they are unnecessary overpriced gadgets

Do we get the pouch for carrying the grinder?