Bro what a noisi machine? Can't hear what you saying, Looks like it's mor information about you site than oil change😅

What size is your sediment? We have a sub k to deal with large particles, but still have fine particles < ~70microns or so. Thx.

That guy should not even be around animals

Are you gonna saddle the tops of the posts

Shop vac

Any help would be appreciated I recently purchased a 97 7.3 power stroke. Knew the lock cylinder was going, it broke before I could replace. Went in replaced it and the key is still turning back and forth with no/ little resistance. No lights nothing work. Is this an actuator rod ? I can see the rod barely and cannot tell if it is broken any idea how to tell? Any other ideas Ignition switch etc..

OK, this was helpful when I wondered if there was some secret to that last "flange" nut. Maybe I can help a bit more for anybody that still has one of these. The three oddball things you need to know on this one are : 1) yes those two long bolts are tough. I used a 5/16" nut driver for hex drivers fit onto a regular 1/4" hex screwdriver. The kind builders use for running roofing screws etc. 2. As noted in the video, the tube going into the first stage is tight. It seemed epoxied in but it comes out. No biggie there. 3) Because I didn't want to disassemble new second stage I also had to free the whole regulator from the tank to spin on the new second stage part. But MAN, that flange nut or whatever it actually is that goes onto the yellow painted tank nipple. THAT nut was like suspension or muffler-grade ON. I could not move it even with a small cheater. And careful there, as you are wrenching it the whole regulator wants to rotate into the fan and could damage it. Have to also hold the regulator in place and while you turn or struggle to turn that epoxied on flange nut. And it doesn't get much looser when it breaks. It moves a bit and keeps holding. I took a torch to it, carefully cause there's plastic nearby and possibly in contact up the metal. But with that, it broke loose, sorta reluctantly moved a hair, then a little less reluctantly. What a PITA. But it's fixed.

He has an idea. But not a clue.

😊😊sukses selalu abang,,,,salam dari indonesia😊

Did this solve your issues ?

great description. have the same issue and this will help immensely. also, feel your pain with the piece of plastic.

Great fix! I have an LT35 and will have to keep an eye on that. Would love to have hydraulics farther down the mill but not sure I can without a cable track.

E km

Wow, the only problem I have is I do not have one of those floats. I replaced the water inlet valve and still my machine will not fill with water and I have the same model as you Frigidaire gallery.

Is 2024 and every state is different and not only that every dmv is different its ridiculous.

Come on man. You are just like the moron parents who bring their unrestrained children to restaurants and expect other patrons to have to listen to their whining. When I am seated at a restaurant next to another patron who brought his/her undisciplined children who are whining, I'll ask the waitress to move the morons to another table, or. as in this case, just leave. No wonder Harris has a following.

Nice clear video of how this switch assy. works. Thanks much.

Sir, thank you so much for this explanation. This was EXACTLY what my problem was also (1999 F350 dually). Very very helpful. And I love the additional info regarding how the switch works. 👍🏻 I can’t say it enough, Thank you again sir.

Where you bought your sensor?

Did you build a core trench, overflow, keyway or anything on this dig? I’m going to be excavating a pond on my property literally starting tomorrow, and just rented a CAT 313 for a month.

My eyes have been opened. Thank you

Building a catio and needed this info. Thanks for the "support"..... Great vid

You can’t use the stopwatch on your phone for the one minute and 45 second count?

Thanks 🙏🏻😊

Thank you for putting this video together! I am getting ready to take mine apart and check the same. Is your dishwasher still working?

Your video sucks, too much background noise

Thanks for the video! Folks. . . there could be a problem with the adjustment. The factory says that the two top studs have adjusters, so the INSIDE ones should still direct the beam in and out and the outside adjuster should move the light vertically. Be forewarned, USE GREASE, VASELINE, OR ANTI SIEZE on those clips because if you need to make an adjustment or a bulb change, you WILL have to take the lights off! I am planning on creating a custom clip that I can pull put by hand. As a precaution, just put in all new lower case bulbs. Regarding condensation, I am not sure if we can avoid it. Supposedly converting to LED bulbs is a problem because these light projectors are specifically made for halogens.

What State are you in ? Here in central Iowa , the Pella window company used to sell all the sawdust and shavings they produce making window frames .

Thank you for making this video and making it easy for me to pay the $75 in labor to have someone else do it. 😂 Can we get the unedited version of this video with all of the cussing?

Not pointless to me! Thank you

Thanks for the vid! I was wondering 🤔 where those horns were.

What a genius

I just noticed my 715 was not square after a year, just like yours off just a hair. Great info

Don’t like how he kicks at them

That’s easy, yes. Now do you put clamps on that so you can screw it to the boards

Have you ever thought about using paracorde? I might try it.

SHOW HOW TO DO IT WORTHLESS VIDEO !!!

That's overcooked bro

Im so smart I'm stupid & math is my WORST subject. I'm building a shelf & THIS IS EXACTLY what I needed!!!! Thank you SO MUCH especially for the 55°&35°, 60°&30° tip!!!!! Finishing my 3rd & best shelf tonight 😊

Hi can I stack in the sun , covered and stickered properly. Thanks , worried my shade spot has not enough wind and air .

I recently acquired 3 duplo trains. I was able to get 1 of them apart, but the first one has a messed up gear, the second one is corroded and the third one doesn't have sound but don't worry because the wheels are squeaking SO loudly. I hope I can get at least one to work :(

😮 hawk tuah bro SPIT ON THAT THANG 💦🍆

Thanks 😊 forgot it it has to equal 90 duh

But would 45 and 45 work as well?

Next time use a piece of vacuum hose or fuel line that just fits on the end of the spark plug. Or to pull the spark plug out you can even use the coil pack

How would I get it just like that but flush with both ends?

took mine apart cleaned it dried it lightly greased the sliding parts but not the contacts at all. works fine now. I used screws to replace the rivets.

Lmao! Not pointless! The best part is when people see the advantage of all parts, and also not so much for other things within life! Anyway! 😊

Nope - not a good video No subscribe from me for one reason you take the first 3 minutes to show those kids and then they were yelling the whole video. Get rid of the kids if you want people to watch.

Bomb video! Good tip so easy to over look