Thanks for watching! Unfortunately it was crushed in the box in the car on the way to the event that part got cracked and then failed about 50 feet up and took a nice dirt nap after lol

@@BuddyRC I gotta admit it Buddy. You hit a certain string in me with that video. Them memories just keep flowing. :) I just had to dig up that plane. Sent You a couple of pictures in an e-mail. But also figured "the almighty algorithm" would like another interaction on KZbin. I guess that is why all the KZbinrs always ask for comments. What i absolutely loved about that plane as a total noob - was that flat pack IKEA approach. I'd just stick 3 mostly flat boxes into my backpack and drive my bicycle around the outskirts of my city, looking for that perfect airfield. I'd snap it all together and in a couple of minutes i was ready to fly. 6 batteries did about 30 minutes of pure flight time. The transmitter that came in the box, did not inspire confidence, it looked like a cheap toy and the resolution on the controls was awful. So i found a way to connect a cheapo 6 channel radio to the 'mainboard' and still keep the gyro assist. The trick is to find a radio that uses Futaba S-FHSS modulation. So the new radio set did not change anything at all . Those little chinese servos still had horrible resolution, but at least now i had trimms on the transmitter and i didn't have to worry about range. "Planting it" is a nice way of saying it… In Polish we say we did a "molehill" - because the crater left by a diving plane in soft soil, resembless a molehill. Yes i've had one 'molehill' that broke the whole fulesage in half - there is some fibreglass epoxy'd to the underside of the plane. Instead of just byuing new wings, i drilled out the plastic struts and replaced them with a carbon tube - i lock the wings in place using steel wire pins. New wings are just around 25 dollars, but from what i've heard repairing is supposed to be half of the fun in this hobby. ;) I also broke one plastic strut on the horizontal stabiliser. Overall 7 out of 10 for the model. I chose the plane mainly because it was so perfectly foldable - but the joints turned out to be the weak points.

Thanks for watching! Flite Fest is held in Malvern Ohio and normally around June or July.

Thanks for watching! It uses a Xt60 in

Thanks for watching! I use the ELRS version to race with because it has the least amount of latency.

Thanks for watching! The Nexus needs a external receiver to work so a DSMX satellite receiver can plug directly to the Nexus

Thanks for watching! Yes it works perfectly with AccuRC

Thanks for watching! I personally am using just the OMPHOBBY gov. and it works flawlessly. As far as the tail if it slowly goes back to center its in heading hold if it snaps back quick to center its in rate mode. It should be good to go if its moving back slow

@@BuddyRC Any idea why all of a sudden when trying to set up the Nexus my ESC keeps beeping fast with it connected to my Futaba Receiver using SBUS? It was already programmed and working with the Spirit 2.

Thanks for watching! Yes you can you just need to run it as a sbus receiver and get a plug from one of the Sfhss receivers so you can plug into that slot on the flight controller.

@@BuddyRC amazing, thanks

Thanks for watching! SFHSS is a type of receiver, it will allow you to get the full potential out of the helicopter and be able to edit more of the programing of the Heli.

Thanks for watching! My throttle curves will be different but I don't run a normal mode so my throttle curves are all flat. As far as the pitch it should be a -100 to 100. Also try to dial in the pitch with the pitch setting on the flight controller you can add and subtract pitch by using your elevator stick.

Thanks for watching! Much agreed they hit it out of the park!

Thanks for watching! I personally don't like the feel of AGO1s they are too clicky for me the stock ones are smoother to me.

@@BuddyRC thanks for your feedback. I'm going to stick with the stock ones as well for now. Mine are smooth too

Thanks for watching! There should be a program already in the pocket when you buy it.

Thanks for watching! You can always do a special function switch to over ride just your throttle channel (channel 3 I believe) and just have it at -100 when activated.

@BuddyRC I understand that but I can't figure out why that throttle input isn't showing that curve in the monitor