Пікірлер
@sunflowergrowing 3 күн бұрын
Watched whole video not sure how to install brackets and video brushed over that step. 😢
@JackofAllCarbinc 2 күн бұрын
sorry i did skip and was asked about that, i have made a video just on that you can see by looking at the link or at the end there is a banner for it.
@mohamedseydi2726 6 күн бұрын
Bonjour suite à un oubli de la lumière du plafonnier dans ma voiture, ma voiture a refusé de démarrer et à affiché la clé verte pensez vous que je dois reprogrammer ma clé ? J'ai déjà effectué différents tests, (batterie, fusible etc...)
@JackofAllCarbinc 5 күн бұрын
if green light then thats the only fix i know for that
@timjames6445 8 күн бұрын
Hey man awesome! Mine sometimes it start normally and then after a few days it would be back to that green key, so i sure could take it to a destination but i wanna fix it for real, already bring two mecanics and none knew the problem, also i brought an electrician to check it with a scanner and still couldnt find any issue, also the keys chip working fine said one locksmith with a scanner, so you may know whata the issue? Pretty please! Already spend alot
@JackofAllCarbinc 7 күн бұрын
I would have the locksmith reprogram your immobilizer and cut you a new key, if its intermittent the computer will rad no issue when its starting. Sadly its trial and error but if you already had the locksmith there i would just rekey and reprogram the immobilizer. Also checking fuses and relays but if you had an electrician do that next step i could think of would be that. Keep us updated if possible in case you find a diferent solution.
@jukah3701 9 күн бұрын
Where did you get your emblems from?
@JackofAllCarbinc 7 күн бұрын
straight from my local honda dealer
@upnorthkenny9674 9 күн бұрын
How come you didn’t show screwing into the counter? Seems to me that would be a real important part of the video 😂
@JackofAllCarbinc 9 күн бұрын
well i can make a video on how to screw screws onto counters next.
@crazycracka-q8s 11 күн бұрын
where do you get the black slat wall with the gray stripes? its the wall you have all the Milwaukee power tools on? 3:13 in the video?
@JackofAllCarbinc 9 күн бұрын
Hi the grey is not from the slat wall. its sleeves they sell separate. you can try and find at a local business display store and just ask for the sleeves that provide strength
@sleyvawinston 13 күн бұрын
Thanks!
@JackofAllCarbinc 13 күн бұрын
your welcome, hopefully saved you some money.
@w.r.dayton6867 13 күн бұрын
Thanks for this. Midea C/S told me that the casters are optional, but highly recommended if you want to move the freezer or if the base isn't flat on the floor. Again, thanks!
@JackofAllCarbinc 13 күн бұрын
Mine did not sit flat and looked silly without the casters Not sure why there were not just installed from factory.
@admffun509 13 күн бұрын
Thanks for the info❤
@JackofAllCarbinc 13 күн бұрын
your welcome, glad it helped.
@richardcarroll691 18 күн бұрын
Thank you for showing what the amdro video didn't. I watched that video at least 5 times and I wasn't getting it. But, after watching your video just once, I got it and understood it. I'm not the smartest or dumbest person out here but it was just one simple feature that you covered and he didn't. Thanks
@JackofAllCarbinc 17 күн бұрын
Your welcome and your not the only one who had a hard time trying to figure it out. I too kept trying till i figured out and thats why i made video. As you can see by views there are tons of people that cant figure it out with their instructions given.
@blackviybe3172 18 күн бұрын
Life saver I swear ☺️💪
@JackofAllCarbinc 18 күн бұрын
Glad it helped thank you for comment
@elizabethpeters6961 19 күн бұрын
Were can i order blk out emblems for my 2022 sport?
@JackofAllCarbinc 18 күн бұрын
you can get from honda parts online or just go to your local honda dealer and they will have them, I got mine direct from my local honda dealership.
@BY-ty7se 19 күн бұрын
I have exact same issue after changing my battery. I have the master key which also didn't work. Shouldn't the master key by pass the immobilizer?? This is such a pain in the ass
@JackofAllCarbinc 18 күн бұрын
no master key wont work in most cases.....From what my mechanic explained was that the immobilizer had to get reset as well and basically wiped and restarted because something caused it to not read or send signal. Let us know how it turns out and if you find a better way to fix.
@johnramalho6047 23 күн бұрын
Does this system still work for you after 4 years?
@JackofAllCarbinc 22 күн бұрын
Yes still using this and not sure if its the bins or not but i have just recently defrosted the inside I think it helps minimize the frost build up as well.
@johnramalho6047 22 күн бұрын
@ thanks for the response/reply
@chrisannlittle 24 күн бұрын
Thank you so much!!!!❤❤
@JackofAllCarbinc 24 күн бұрын
your welcome, glad it helped out. Thank you for the comment
@mikethompson3534 25 күн бұрын
Only genuine Honda alternators for me yes expensive but I only will do it once
@JackofAllCarbinc 25 күн бұрын
so far mmy aftermarket still running strong without issues, hopefully that does not change. Just sometimes you have to save a few bucks.
@juniorf1310 28 күн бұрын
Can u tell me the exact kit u bought and where it was from
@JackofAllCarbinc 28 күн бұрын
Hi, I purchased direct at my local honda dealer, the exact part is listed in beginning of video.
@lisalancework7999 29 күн бұрын
I have lived in the panhandle of Texas for seven years and this is the first year I have seen gophers or moles I'm not sure which one they are, but what is causing them to be so prolific my neighbors also have them???
@JackofAllCarbinc 28 күн бұрын
usually grubs in soil attract them.
@lisalancework7999 28 күн бұрын
@ ty -i'm just curious why they're there this year and haven't been for the past six-I have in the past put down like flea killer ant killer on my yard, which may be in advertently also killed grubs and maybe that could be the reason??
@morenocastillo1541 Ай бұрын
Muchas gracias por el video yo también logré arregle mi secadora gracias 😂😂
@JackofAllCarbinc Ай бұрын
de nada.
@juliefogg8722 Ай бұрын
WOW!!! THANKYOU SO MUCH FOR THIS VIDEO!!! YAYYYY( I was starting to think about replacing my watch! Xxx 😅
@JackofAllCarbinc Ай бұрын
thank you for comment and so glad it helped.
@Chadgio Ай бұрын
Thanks for the video. I have the Frigidaire 7cu freezer from Sam’s and the same bins work perfectly, just picked them up today. I created a live inventory on a collaborative Apple Note (numbered the bins) with my family to save from having to buy the dry erase board. Thanks again!
@JackofAllCarbinc Ай бұрын
Glad to hear it worked out, thank you for the comment. Smart idea with the apple note
@alexmorton6911 Ай бұрын
Easier to just lay the freezer on its side. The trick is to make sure the pipes coming out of the compressor remain up. On mine both outlet pipes face the rear; thus for mine I can safely tip the fridge onto its face. I can throw a blanket down on the ground and tip it over frontwards. To check the pipes on your fridge, remove the side cover. On mine its 5 phillips screws...takes 2 minutes. Just look which direction the pipes go out of the compressor. If both go the same way, its easy. If one pipe goes forward and one goes back, keep the bigger pipe upwards when it is tipped.
@JackofAllCarbinc Ай бұрын
.
@PolskaBabii Ай бұрын
Thank you because I was not handing over $250 to have this installed and the directions were ridiculous…followed this step by step. Appreciate it!!!!
@JackofAllCarbinc Ай бұрын
Glad it helped and yes those instructions are junk.
@judyrussell3932 Ай бұрын
Thank you!! The instructions that came with the dishwasher made no sense
@JackofAllCarbinc Ай бұрын
Your welcome, glad it helped and thank you for comment.
@daddynichol52 Ай бұрын
Great! Thank you!
@JackofAllCarbinc Ай бұрын
your welcome, glad it helped.
@ladym7547 Ай бұрын
Great idea! Love this!
@JackofAllCarbinc Ай бұрын
glad it helped and thank you for the comments.
@Jacob6853 Ай бұрын
Thank you so much for this vid. IDK why this kit came w/o instructions but you were a life saver!
@JackofAllCarbinc Ай бұрын
Your welcome, thank you for comment and glad this helped.
@KnuckleDragginDad Ай бұрын
Appreciate the simplicity of this video. What I’m curious to know is when I see a mound of dirt how do you know from which direction to dig or insert the shovel? Or do you dig close to the mound enough to lift all the dirt below the mound & search around for the home from there?
@JackofAllCarbinc Ай бұрын
thats very tricky but just picture the gopher pushing dirt out of the hole so idea would be that the hole would be right next to the highest concentration of dirt but some mounds are just even so in that case i just go around 4 inches aaround the whole diameter of mond and dig that portion out to find the tunnel.
@johnvigil3658 21 күн бұрын
I use a metal probe around the hole to find tunnel.
@dearingfauntleroy1795 Ай бұрын
how does one person turn over a hundred pound freezer on its side to install the castors ?
@JackofAllCarbinc Ай бұрын
leverage and friends.
@dww-fromnc Ай бұрын
Great video. Short and to the point.😊
@JackofAllCarbinc Ай бұрын
Thank you and thank you for the comment
@jdawgl33 Ай бұрын
Great tutorial! I agree, no civic emblem looks best.
@JackofAllCarbinc Ай бұрын
Thank you appreciate the comment. Very happy with results.
@kristianbueno6204 Ай бұрын
Finally found the badging swap video I've been looking for. Plastic bag trick is a nice touch.
@JackofAllCarbinc Ай бұрын
thank you, hopefully you gave a thumbsup to help get it out to more people, I tried figuring out an easy way to make sure no damage would be caused to paint and came up woth this, I didnt like the way other people used those plastic clips and screwdrivers to py off badges, Thanks for comment.
@sandymilne224 Ай бұрын
And when you have Artificial stone without wood?
@JackofAllCarbinc Ай бұрын
Hi you can side mount as well. Im sorry not too familiar with process but sure theres a you tube video on that. This dishwasher has some side access slots where you can mount to the sides.
@TheScubacamper Ай бұрын
Thanks for posting - I was stumped as most cars don’t have removable rails like the one on top
@JackofAllCarbinc Ай бұрын
Glaad it helped and thanks for comment Im glad to hear im not wasting time posting the videos.
@GeorgeNadaYT Ай бұрын
Best video on this fix.
@JackofAllCarbinc Ай бұрын
Thank you and glad it helped.
@rachellepaul1629 Ай бұрын
Saw this video today and I was on my way to IKEA within the hour. Can’t wait until tomorrow to defrost and use my organizers. They are on sale right now for anyone who is interested.
@JackofAllCarbinc Ай бұрын
Glad it helped and thanks for comment, glad its helping people out.
@vladyslavprybyliev9312 2 ай бұрын
Bro where can I buy black badges?
@JackofAllCarbinc Ай бұрын
Any honda dealership or hondaparts online.
@TysonSommer-DFWCP 2 ай бұрын
Man... I guess we 2016 Sorento drivers are somehow predisposed to crunching our passenger wheel well against something. I've got a crunch in the same spot for overestimating the proximity of my garage opening's right side wall.
@JackofAllCarbinc 2 ай бұрын
lol.....crazy part is i lost my wheelwell and have no isdea how it happened or when.
@nicolelam3223 2 ай бұрын
Wow this is very cool! You’re so smart!! Very organized and very helpful and useful!
@JackofAllCarbinc 2 ай бұрын
Thank you so much, Glad my OCD helps others lol.
@MeloneKidd 2 ай бұрын
Awesome thanks. Right to the point i love it
@JackofAllCarbinc 2 ай бұрын
Your welcome and glad it helped.
@avenir7060 2 ай бұрын
yep just happened to mine now
@JackofAllCarbinc 2 ай бұрын
i just had my zflip 5 that it happened to as well. I ugraded...they made me pay this time for it so at this point i have given up on zflips and moving to apple.
@shantishaharazade9463 2 ай бұрын
Thank you so much!!!!!!❤🎉❤
@JackofAllCarbinc 2 ай бұрын
your very welcome, glad it helped, and thank you for comment.
@shantishaharazade9463 2 ай бұрын
@@JackofAllCarbinc it so did!
@Mightyempress 2 ай бұрын
Exactly what happened to mine I used command strips Velcro to keep it up but the heat kept melting it down
@JackofAllCarbinc 2 ай бұрын
Class action lawsuit in my opinion, it would not be bad if i knew the ones i keep buying from honda have this issue resolved but they dont same issue with them as well.
@verywired1 2 ай бұрын
5 star video!! Straight to the point with no unnecessary bs. Even included the torque specs! Bravo🎉
@JackofAllCarbinc 2 ай бұрын
Thank you and im glad it helped.
@mrharlemike28 2 ай бұрын
Thank you! Its been forever since I installed one of these. New subscriber!
@JackofAllCarbinc 2 ай бұрын
Im glad it helped and thank you for comment and subscription.
@antoniosanchez8291 2 ай бұрын
hi, bro! very good and thank you for the video...what is the part number for the screws? please...
@JackofAllCarbinc 2 ай бұрын
Sorry dont remember the exact number but you can go to honda parts .com and they have a breakdown of parts you need just make sure your putting correct info ...i.e. year a/t model since there might be a diference between models.
@jaanzjeet 2 ай бұрын
Excellent explanation. Thanks for covering such niche topics and exactly the way one needs it.
@JackofAllCarbinc 2 ай бұрын
your welcome, glad it helped.
@IrfanAnsari-ev8ni 2 ай бұрын
Bro not work😢
@JackofAllCarbinc 2 ай бұрын
what part? brake code or rekey?
@ron2368 2 ай бұрын
Just an FYI, these washers are very deep so for the power and drain/water lines you have about a 6-inch high clearance area for those items along the rear wall, I had an old install and had to move the lines lower, and install a recessed outlet with a 90degree plug. I was not as prepared as I thought.
@JackofAllCarbinc 2 ай бұрын
I too needed the 90 plug but pretty easy install.
@BobToast-o5n 2 ай бұрын
Thank you subscribed to your channel
@JackofAllCarbinc 2 ай бұрын
glad it helped and hopefully at least one other video helps you out.