Shadon HKW

Пікірлер

@nobbysworkshop 18 минут бұрын

Happy and peaceful New Year to you Stan and family. ATB from Nobby in the UK

@outsidescrewball Сағат бұрын

Enjoyed…HNY….luv my gifted squares from years ago

@danielmeyer9181 2 сағат бұрын

Thanks Stan!

@paulhammond7489 2 сағат бұрын

Call it - Collet 🤣🤣🤣 Happy New Year Stan

@kimber1958 4 сағат бұрын

Thank you, Stan. Happy new year to you and all of yours.

@NavinBetamax 10 сағат бұрын

is this A Hat or Cap ? I know for shure it is not a Helmet !

@Clough42 10 сағат бұрын

So it isn't just me. I'm struggling to get mine to securely hold a cylinder square without opening up.

@ShadonHKW 10 сағат бұрын

We thought we had bad centers, so we reworked both centers and did a bluing check. We found that the centers were pushing out, overcoming the spring pressure in the headstock. Tightening the spring knob would keep the part spinning true, but the motor didn't have the power to overcome the added friction

@Clough42 4 сағат бұрын

@ShadonHKW yeah, the spring pressure isn't sufficient on mine, unless I tighten it down hard against the fully compressed spring, but then there's no ability to compensate for thermal expansion, and you have to unscrew the adjustment knob to get it in and out.

@charlesgause8224 10 сағат бұрын

Happy new year.

@specialks1953 11 сағат бұрын

Happy New Year! Stan & Family

@907jl 11 сағат бұрын

Happy New Year Stan, have a great 2025!

@TheAyrCaveShop 12 сағат бұрын

Happy New Year Stan 🥂🎉

@jamesreed6121 12 сағат бұрын

Have a great New Year! May 2025 be the best year yet. KOKO!

@timothyolin4809 14 сағат бұрын

Happy new year Stan and hope your 2025 is a good one.

@MicksWorkshop 14 сағат бұрын

Wishing you and your family a very Happy New Year Stan!

@scottgard3278 15 сағат бұрын

Happy New Year !

@AWDJRforYouTube 15 сағат бұрын

Happy New Year 2025 there Big Stan The Man!

@bryanhedstrom7071 15 сағат бұрын

Happy new year Stan!

@ericwolf5874 15 сағат бұрын

I don't know what I would put on a stencil off the top of my head. But, I think it is a great idea. Maybe do a bulk pack of maybe 5 to 10. If nothing else, it is a great way to keep that fabulous old machine in use. Happy New Year Stan. 🎉🥳

@RTSproductions1 15 сағат бұрын

Hey I want a stencil for sure. Spray my name on scuba tanks!!!! Also want a set of 45 degree squares...I have a set of 60 degree I really like. Happy New Year

@danrabenhorst2549 15 сағат бұрын

Happy New Year have a prosperous year

@thomasutley 15 сағат бұрын

Here’s to a fantastic 2025!

@davidiansykes 15 сағат бұрын

happy new year stan

@andyddog2 2 күн бұрын

Thanks, very good video

@KimboSplice 4 күн бұрын

How is no one talking about this? I get the whole linesmen and flat head thing but is this actually a viable option for those who wants a tool dedicated to locknut?

@potlimit2002 6 күн бұрын

Everything in this video was spot on except grinding the table and chuck without coolant. If I was you before I did anything major I would grind everything with coolant.

@melgross 6 күн бұрын

I use a brown Norton wheel for my chuck and other soft material. That’s the wheel type Norton makes for soft steel, cast iron, brass, aluminum, magnesium and of all things, stone. I find that it doesn’t smear the brass or other soft materials. This is a 60 wheel, medium density. It doesn’t load much and wears about average.

@floridaflywheelersantiquee7578 8 күн бұрын

Thanks for the invite Stan Merry Christmas

@jimz6076 9 күн бұрын

Hello do you have a video for when the bit doe snot release and the hammering just does sot happen.

@sharstool2251 14 күн бұрын

I always thought "Winter Bash" was an anomaly, but I was wrong. Merry Christmas everyone and let the good times roll!

@ShadonHKW 14 күн бұрын

It just kind of evolved by itself, who am I to turn down a good party?

@jimpritz4169 15 күн бұрын

Hope you have a great party and Merry Christmas to all. If Georgia was a little closer to you it sounds like fun. Thank you.

@classicrestoration 15 күн бұрын

Merry Christmas to you and your family🎄

@bcbloc02 15 күн бұрын

Do you still have your old V10 truck? That Natchez trace connected to Boones wilderness road that led into Kentucky supposedly around 1800 at least 10000 Kentuckians a year floated down the ohio and Mississippi rivers to New Orleans to deliver their crops and goods then walked back up. By 1830 the steamboat had virtually eliminated that practice as it was much safer to ride the boat and easier. It was very common to get robbed on the Trace since they knew people had sold their years products and had money.

@ShadonHKW 15 күн бұрын

Hey Brian, Sold the V-10 with 345 K (original miles) on it, really wanted to switch to Cummins, so glad I did. The V-10 would pass everything but a gas station.

@bcbloc02 15 күн бұрын

@ the few guys I knew with them got like 8mpg loaded or empty but they all seemed to hold up well. I rarely saw any over 200k cuz most everyone switched to a Cummins for pulling. Then they got like double the mileage.

@NostradamusJr 16 күн бұрын

why did he start at 9 inches first? where did he get that number from? i get the 2 inch increments but why choose 9 as the number?

@ShadonHKW 15 күн бұрын

9 inch was the distance from the first pipe to the unistrut

@MicksWorkshop 16 күн бұрын

Very nice Stan! I wish I could go but alas I am stuck in the very cold and snowy northeast. I hope you all have a great time. I hope you and your family have a very Merry Christmas!

@charlesgause8224 16 күн бұрын

Merry Christmas stan wish we could be there. Looks like it will be a good time.