Thank you, and you're welcome! Hope you get your project fixed!
@Theghostescapes2 күн бұрын
That made my day. Our range cart won't "shift" to a higher speed, and redlines around 2 mph. The centrifugal clutch doesn't move inwards hardly at all. I'm thinking its all the dirt we've been driving through and perhaps it just needs to be blown out so the weights can move. If that's not it, thanks to you, I know what to do next!
@mehlsmountaingarage2 күн бұрын
Hopefully, a good cleaning will get it working again. If not, I hope. This vid helps! These clutches do need periodic maintenance to stay performing optimally.
@adriansalazar41355 күн бұрын
What is the replacement cover called?
@mehlsmountaingarage5 күн бұрын
Good question, I'm sure of the name proper name as it would be in a parts diagram, though I could look it up.
@Goodellsam8 күн бұрын
Call me crazy, but I would pressure wash that first.
@mehlsmountaingarage8 күн бұрын
Not crazy, I would have, but didn't have one available at the time. It's definitely better to start clean!
@rickbrunoni723714 күн бұрын
Very informative.
@mehlsmountaingarage14 күн бұрын
Thank you.
@tomheller823316 күн бұрын
Awesome 👍
@funone871619 күн бұрын
So my 95 ds has the mount welded to the engine sub frame. How do you change that? Looks like take off the leaf spring shackle bolts and slide engine frame and axle back? About 5x more difficult, no wonder no one replaced it. Edit.....I just cut a slit in one side of the urethane cushion and slipped it on, 2 zip ties hold it in place. Saved hours of work
@hubertbryant55876 күн бұрын
Mine welded also
@hubertbryant55876 күн бұрын
@@funone8716 you got a picture
@jamestone26520 күн бұрын
Doesn’t that engine have a PCV system? All supercharged engines definitely need a catch can system and I’ve got one on all my cars. In my opinion an AeroSpace Components or Moroso belt drive crankcase vacuum system would be better than electric one…
@mehlsmountaingarage20 күн бұрын
This car still has a pcv system, a separate catch.
@carlosnsosa9920 күн бұрын
All the people on the tour were very friendly and polite and helpful people who would stop and offer help to others when needed I love that about the car community
@mehlsmountaingarage20 күн бұрын
That's the truth, we had a ton of help and support!
@carlosnsosa9920 күн бұрын
Congratulations on completing the tour we took off early and we were so disappointed that we didn’t finish the tour!!
@carlosnsosa9920 күн бұрын
Hope to see you guys next year on the powertour again
@mehlsmountaingarage20 күн бұрын
We are making some plans now, likely a different ride we have so many of them!
@carlosnsosa9920 күн бұрын
Bring it on the powertour next year
@joelnewburn6199Ай бұрын
Where is the damn voltage regulator at? That’s all I want to know
@mehlsmountaingarageАй бұрын
It should be either in the fuse/electrical box under the seat on the drivers side, or on the frame rail right next to the box. Those are the two places I've seen them on the gas club cars.
@burtreynolds3143Ай бұрын
Mehl, How did the Right Stuff hold up after 2 years ? Do you still have the car? I have the same issue. I had to pull the passenger seat and try to get under the carpet. It was full and never dried. There is some sponge rubber under the carpet that soaked up a ton. I'm curious if the Right Stuff held up because it is easier to find than that black sticky goo they used.
@mehlsmountaingarageАй бұрын
I still have the car, and it has help up! It's parked outside and I daily it. The cover doesn't get the direct sun and UV, I'm sure that helped.
@ofivenojoeАй бұрын
In kailua, beach by the Magnum p.i. house, there was a three window, like this one. For some reason it never moved, i watch it disappear from the salt water This makes me happy the other , very. sad
@mehlsmountaingarageАй бұрын
Salt air kills! It's a shame to see these old cars rot away.
@reltub20001Ай бұрын
Come on. This is the first time I've seen one of your posts You didn't finish the post. Don't put these out unfinished. We want to hear it, not just a bunch of jabber
@mehlsmountaingarageАй бұрын
Thanks for the feedback! I did post a follow up with the exhaust installed.
@Morbid611Ай бұрын
Sounds sick man!
@mehlsmountaingarageАй бұрын
Should hear it now with the new exhaust!
@VintageMomentsАй бұрын
I wouldn't use any of that stuff from scamazon. Grt some wire brushed and clean the tubes and nozzles.
@mehlsmountaingarageАй бұрын
I don't disagree, and usually clean the OEM components. But even after cleaning the jet, emulsion tube, neddle and seat, and what even passages I could get a torch tip cleaner in, still a no go. So, a cheap replacement was in order, especially for a tractor with over 500 hrs on it.
@mikestrouse2 ай бұрын
I bought mine used. Didn't even have that flap on there.
@mehlsmountaingarage2 ай бұрын
Wow, I'm sure it leaks when it rains, you just have to fab one up.
@marcinsroka26972 ай бұрын
what oil did you use?
@mehlsmountaingarage2 ай бұрын
30 weight small engine oil from tractor supply. Nothing fancy.
@staytight63402 ай бұрын
Show how to remove the deck plz😊
@mehlsmountaingarage2 ай бұрын
I can make a short video of that!
@TomsChevelle2 ай бұрын
Thank you Mehl! Great video. Yea, this happened to me a couple weeks ago.
@mehlsmountaingarage2 ай бұрын
You're welcome, hope this helped you fix it!
@palomino19702 ай бұрын
Indiana roads are the worst!!
@nstlgctripthruystryr3 ай бұрын
what about the electrical connector?
@mehlsmountaingarage3 ай бұрын
They can melt over time and get messed up, worth checking if you're having issues.
@nstlgctripthruystryr3 ай бұрын
@@mehlsmountaingarage Thank you. Connector looks good but the gauge goes up faster than it used to. It only goes up to the 3/8 mark though. Relay seems to work too. I just don't know if I should be concerned or not.
@garylee94373 ай бұрын
As long as you have beer and ice you can go all the way and enjoy yourself
@mehlsmountaingarage3 ай бұрын
We've managed to have both2
@popcornplaya83ify3 ай бұрын
So i got a question i have a leak going to my floor on the driver is there another on the other side as well or just the passenger side?
@mehlsmountaingarage3 ай бұрын
There is only the plug/cover on the passenger side. Not sure what would contribute to the ds leaked, possible the antenna.
@popcornplaya83ify3 ай бұрын
@@mehlsmountaingarage ok thanks..
@nevysnova3 ай бұрын
If it was easy…everyone would be doing it 👍😛
@mehlsmountaingarage3 ай бұрын
Ain't that the truth, but this is the fun of it!
@JayarBass3 ай бұрын
great vid bud. thank you
@mehlsmountaingarage3 ай бұрын
Thank you!
@bigredjohnson69213 ай бұрын
If you don't do those kingpin bushings soon, you will be doing those tie rod ends again sooner than later.
@mehlsmountaingarage3 ай бұрын
Agreed, they are next on the list, haha. A have alot of projects stacked up!.
@nicholaswilson62343 ай бұрын
Super helpful thank you
@mehlsmountaingarage3 ай бұрын
You are welcome, thanks for the feedback! Glad it helped out.
@icarossavvides26413 ай бұрын
Absolute waste of time....
@mehlsmountaingarage3 ай бұрын
What's that, the muffler porting? Likely is with the stock engine rpm and no dyno to pro e it. But hey, we were there!
@bigredjohnson69213 ай бұрын
Great video, I love the butt hanging out of your mouth while working, reminds me of me while I'm working. Keeps the bugs away.
@mehlsmountaingarage3 ай бұрын
And there are tons of bugs here, and it seems to do the trick, 😆
@LifeWithJay223 ай бұрын
I drop the sub frame about 3 inches wayyy easier
@ronniecox1093 ай бұрын
Made from the finest Chinesium steel.😂
@mehlsmountaingarage3 ай бұрын
Yes, hard to get anything USA anymore!
@bigbill7093 ай бұрын
Nice job thanks for the how to see ya next time brother.
@mehlsmountaingarage3 ай бұрын
I appreciate it! Thanks for watching!
@mollnm4 ай бұрын
Great video! Just changed all 3 of my spindles and this helped a ton. Also convinced me to sharpen my blades instead of buying new ones
@mehlsmountaingarage4 ай бұрын
So glad it helped, and you are keeping that mower going! Sharpening the blades is good to do periodically to keep the grass cut clean. I sharpen mine once or twice before I bend my blades, as I have alot of dead branches and rocks around my property and normally just run them over since I can't see them sometimes, haha.
@Doober120824 ай бұрын
What do you use for uv protection? I cleaned the lights on one of our cars last year, the sun/climate is brutal in AZ.
@mehlsmountaingarage4 ай бұрын
I have used the 3m wipes, though they can leave streaks. I'm trying the meguiars UV spray this time. But to be honest, I usually use a 2K high solids clear.
@rebelyankeesshow56864 ай бұрын
If you dont have a dude like this in you're life, you're lost. Thank you for you're sevice
@mehlsmountaingarage4 ай бұрын
I appreciate, thank you for the comment!
@teresacrull43844 ай бұрын
Thanks for this video. We also have this mower as a hand me down, and I'm doing my best to keep it running.
@mehlsmountaingarage4 ай бұрын
You are so welcome! I am glad they are helping. I have a few more videos coming for this mower series.
@woodv134 ай бұрын
I have a 2013 club car. Would mine be clockwise or counterclockwise to remove it.
@mehlsmountaingarage4 ай бұрын
Sorry for the delay, here is the information I have: 1984 to late 1996: Kawasaki engines w/the 2 part transmission/differential rotate Counterclockwise. 1997 to late 2013: Kawasaki engines w/Unitized transaxles rotate Clockwise. 2014 to present: Subaru engines w/Fuji transaxles rotate Counterclockwise. Hope this helps.
@johnstark30584 ай бұрын
Great video,and great little motors.....your title says yamaha, and i guess you know by now its a kawasaki motor 😁 good idea putting an oil pressure gauge on it.
@mehlsmountaingarage4 ай бұрын
Thanks for calling that out!!! I totally had a brain freeze.
@mehlsmountaingarage4 ай бұрын
Fixed the title, I had the hash tags correct, totally messed up the title.
@edwarcandy46484 ай бұрын
Great video, Thank You. Another American invention.
@mehlsmountaingarage4 ай бұрын
Appreciate it, thanks for watching!
@mikeburnett70285 ай бұрын
Got my TKX through SilverSport also. Great people to deal with. Where you leaving from for power tour?
@mehlsmountaingarage5 ай бұрын
Finished the offset dowels and runout check a few days ago. My brother got the trans in, we have to get the driveshaft now. it'll be running down the road soon. Power Tour 2024 in quickly approaching! We are leaving from South Central PA, so it will be a haul.
@Foxxygail5 ай бұрын
Where's the 02 sensor at the top located?
@mehlsmountaingarage5 ай бұрын
The upstream o2 sensor is in the exhuast manifold (firewall side of the engine) of the 2.2 and 2.4L, not sure of the 2.0. It's pretty easy to get to from underneath the vehicle. The downstream is after the catalytic converter, but before the resonator. Look at this link for a service manual pic, post #3, www.chevyhhr.net/forums/problems-service-repairs-42/o2-sensor-locations-39570/#post621144 Hope this helps.
@greg201520155 ай бұрын
Whoever orders from the link won't get these halo led lights. I've ordered from the link provided, twice now and it's not the halo design like in this video. I've looked everywhere for halo low beam led lights for DS with no luck😩
@mehlsmountaingarage5 ай бұрын
Hmmm, sorry about that! I pulled those right from my purchase history when I made the video. They may have been discontinued from that manufacturer.
@greg201520155 ай бұрын
@@mehlsmountaingarage gotcha. No worries man. Thx for video🤙
@Darkelementsx225 ай бұрын
Did it stop the leak?
@mehlsmountaingarage5 ай бұрын
Sure did, still drive the car daily and it's fine!
@vincelozano59445 ай бұрын
Do you have to pull the motor to remove the clutch?