Injora on order, now. LOL

Does it run standard hex's? I was looking at this buggy and thought, I wonder if I can slap some 1.9 crawler wheels and here we are at your video lol

I have a MST 2.5 w a stock gyro. Can you pls share how to configure radio to be able to adjust the gyro gain? The transmitter I have also has a built in gyro but not planning on using it. TIA

So no auto bed leveling?

Ok so... I'm new to the drift thing and was just gifted a MST RMX 2.0 with the Hobbywing XD10 and Justock 10.5 motor. Turn buckles have been installed on all four corners. I'm assuming shocks are stock. One will NOT keep fluid in it. LOL About par for the course with me and oil shocks. Can you give me any advice on what to do as far as adding mods to the chassis? What would be a good budget servo to get me going? What are some good magnet body mounts to use on it? Is the front foam bumper necessary? (Doesn't have one at the moment.) Does the ESC need to be mounted all the way to the rear? It's mainly under the transmission, little forward and to the right, now. Chassis is all stock plastic, now. Does it help having carbon fiber components? I'm planning on (knowing me) dumping way too much money in it but, I want my rigs to be well put together and with quality components. Any help and advice is greatly appreciated. Thanks in advance.

If they'll put up with the racket I might bring my Mad Crusher GP out there someday. Shelbyville is a hell of a drive to make in a 54 year old Chevy but hey, might be worth it once or twice!

Thanks for putting the time and effort in to your channel - it’s clear you’re passionate about what you do. I’m curious what minimum area you think would be required to practice drifting like you do in your garage?

Cool spot bro.

That is cool!

this looks like a HSP we dont have red cat in Australia

This is just way too damn cool 😊

Where did you get that metal bed for the rear?

Thanks for this video sir! As a newbie to the RC world let alone crawlers I thought I've seen enough reviews and takes to know my decision between these two crawlers but after your take and experience on it you've now solidified my choice.

If you could only get ond RC, would you get the Hosom X-15 the X-08 or the Arrma Gorgan ??

Did you have to update the card before use? If so did you have to buy the pc adapter?

Looks like it helped 👍👍😎😎

6:50 it is indeed 6 months later! 😅

Yeah that Neptune will need some work over time. I wish Bambu would get a big build plate already. But so far so good. I have two of them

cool drifting there mate *thumbs up👍Au💯full view always*

🔥S15🔥

🔥🚒🔥

Still think redcat overall but modified vanquish probably better

I have that on too 😊

I do have a little tip for everyone...at work we have gaffers tape. I've never seen it before, but it's heavy mesh like duct tape, but unlike duct tape, it doesn't leave adhesive behind when you take it off. The stuff is magic. It's so nice that I bought a $20 roll for my buddy why helps me with rc helicopters. He does a lot of work and would use it a lot, and he had also never heard of it. Gaffers tape, awesome stuff!

I've had a t maxx 3.3 for years, but this truck is SICK!! But, the front driveshaft has two joints, the rear of the two on mine is wearing after not much use. The wear is in the cup where the pin touches it. When i run it on the stand, that joint makes a bad noise and seems like it's somehow randomly interfering, causing wear and making noise. There is an o ring in there so i don't know what to do? Also, the front diff had grease coming out after first run? Help!?!?

The new vanquish vrd stance rtr now comes with hd lower links .

I been using radiometer with elrs, they are 2way communication,the telemetry lost mean the receiver that transmits back information is weak, you can use stronger 100mW telemetry of receiver

My plan is to get this and make it run as good as my Hikotech Bianca and RC Oahu Trigger 2 chassis

Hey I'm having a problem with my Ackerman on the d6 was just wondering if you could make a future video covering how to adjust Ackerman properly

As soon as mine comes in I'm firing up the cricut and making door stickers and cutting out a carbon fiber hood for it

Very very smooth

All I can focus on is your '71 Chevelle. 😂

Respectfully... Both are trash....The voltage/gorgon/fury is for budget/kids.

Hitting any events this year? BTC?

can't wait to see your review on it when you get it

Even if nothing else changes, carbon fiber adds a 0.012% cool factor. 😂 Thanks for the video!

I ordered this! And ordered the additional decals to make it an official hoonicorn.

Hi there, I have recently started watching your videos and I love to watch new content But I think you might be able to help me out As I'm new into rc drifting would you be able to tell me which one mst 2.5 rtr or yokomo rtr i should choose?

They should be sending you one for free for such an enthousiasic thorough to the point preview.

only 2 hours away from here. it was a blast coming here

Place my order today look forward to your updates.... Can't wait to make this thing rip.....

Hey Troy, I just watched the video for this car. I mean I'm green when it comes to this drift RC world. But I watch your videos and I watch a lot of other people's videos. I want to compare this to the traxxas drift and the team associated drift that came out not too long ago. Just watching the video. It looks like with that turning angle so much better. It controls better but you drive them so it'll be interesting to see when you get one in your hands. What you really think about it like you said it's hard to tell from the video videos are there to make them desirable for us to buy. Cheers bud

I was bashing my 18859 truck and already damage to the rear differential and that's after the third time out but still a fun and cheap little truck to the fix lol😅

Use orca slicer. That's what I use on my elegoo neptune 4 plus

there are so many things that are not in this video. You have to check out a FPV drone channel to know all the possibilities. You don't talk about sounds and warnings, you don't talk about a lot of things that are on this amazing radio. The telemetry only sends 50mW back to your radio, but the transmitter power is 250mW, so you have control without telemetry for a very long time after the telemetry is gone. no more crappy radios that come with models, elrs will change everything for this kind of radio. and if everything is accepted, there will be no crappy radios with rc cars, and that money will be put elsewhere, there will be an elrs receiver and that's it. that's also why there are so many models! and there is a Multi-protocol version that can control all protocols of all cars or boats of all brands. it can be interesting if you want to control any toy or other model you already have, with this version, it is possible (the 4 in 1 I think..) but you lose the elrs and its power.. so in my opinion, as for drones, this will change everything. Radiomaster is only the first, but there will be other brands that will do it.. also, the internal elrs module says that it can not exceed 250mw, but I think it is just a question of hardware and cooling. if you cool the internal module well, I am sure that we can have the 1w of power provided that we have a good airflow and an internal micro fan. then there is the base for external TX modules, so it is almost unlimited. great for fpv in rc car!!!!

The new fazer chassis looks great! I dont care what the car was designed to do. I just want to build it. I hope they release it in kit form, I dont care much for RTR's...

nice video, any chance you have any long term thoughts on the rpm case?

Just checking if your okay. When you were talking about that body I thought you were going to faint 😂😂😂 Have a great weekend. The car does look sweet and Kyosho does make awesome looking cars

Wow! I bought an Elegoo Max a few days ago and I have been loving it. Have a Longer LK5 Pro and the Elegoo is a definite upgrade. I spent about an hour leveling it and my first benchy came out perfect. Good choice on this one and good thing you didn't go with Bamboo with the recent issues they have. I don't use the big fan also and so far my prints are good. Also is your keypad magnetic? Mine is not and it keeps falling off at the slightest bump so I used RC magnets.

Thanks! As for the rear cv axle and o-ring that fixed the issue as mine popped out often.