I thought there was a signal turn lights or am I missing something? 😅

Thanks for the video. I have replaced the fan in the power supply, but is not spinning and I am not sure if it's supposed to kick in once a certain temperature is reached, can someone confirm? Thanks.

7/10 video review. You covered almost everything but not everything. You went into deep detail and did extra work no one does 😂

Cute, but it only holds 1 spool. Cant use multiple colors. Only support 1kg spools. And when printing PLA you need to open the door😮

Flavie Stravenue

I would probably put the calibrator not so close to the scanner and have it further away as possible

When do you apply the chrome paint for the T-800, before or after the assembly of the hand?

Regarding the "all lights off" scenario: There are two main differences: One is a pro and the other is a con. Pro: Firstly you get better contrast due to 1. Less ambient light, since most projector light is directed to the viewer and not the ceiling 2. The screen is grey. Naturally, black will appear a bit darker... Everything is a bit darker... Con: Since the screen is gray, white balance is slightly off. Everything will be darker than intended. You will never get pure white. If the projector is REALLY bright, you'll get close, but never pure white. Regarding any other lighting scenario, this screen's PROs far outweigh its one and only CON. However, if you are going to be watching the screen in a dark room anyway (because you want to have the best image quality possible at all times), better get a white screen... If you own an ultra short throw projector, search for a white ALR screen (basically one that directs light towards you and not the ceiling...) That's my opinion anyway... Although backed by any scientific documentation you can think of xD

Great video! What is your ceiling height?

Miller Scott Martinez Laura Clark Joseph

Taylor Amy Lee Elizabeth Taylor Joseph

Do capacity matter to cell? If one cell had 2600mah and another brand 2000mah and both have same resistent will this be ok for battery bank

6:49 *Totally unacceptable !!!!* XY-screens should provide a new one in perfect state ASAP !!!! Without any additional cost !!!!

Fantastic!! Thanks

Great manual. Is there any way to get the STL for the "first layer test print" you are using?

About T800 HAND: Where can I get a glass tube?

I love my S1.

👑 Your Review is just King!!! ❤ Gonna buy an anti-light grey screen 💯🙏

20 km/h is the limit in Sweden

Great review 👍🏻 How does it handle going under large trees where the satellite can have issues? And how far from the antenna, can this go?

There is no unified standard for flow testing, but the flow rate of S1 is about three times that of current high-speed machines. Why doesn't anyone want to face it? Are there so many people in this world who don’t like innovation but hide behind lies? When everything becomes a puppet of lies, the world will fall into endless darkness !!!!!

Why doesn't anyone tell the truth? I don’t know why so many people criticize its 1200mm/s. Why are machines with a default configuration of 250mm/s allowed to advertise 600mm/s, but machines with a default configuration of 800mm/s are not allowed to advertise 1200mm/s? 600mm/s and 1200mm/s are just movement speed, We need to discern whether the true value of the product meets our own needs, instead of just complaining and touting .

gonna be interesting to compare to corexy like Babmbu when it comes to thousands of hours of print time, this seems to have way less sacrificial parts, especially bearings,

Great review Nexi. Thank you.

Whoa. That's a big boy!

Great review Nexi 💪💪💪

A 3d printer review in 2024 where a guy tries.. TL SMOOTHERS? Roflmao

I'm glad to see they responded quickly🎉S1 has a great potential

What floor rising screen would you recommend with this

Thank you so much I was just given one of these but couldnt find its brand or model Now I know

Does this model have the overheating issue that the Lite 2nd gen has?

I bought mine today and I have ca 30 min drive every day hope it’s fine 😅😅 and how is it in the rain ?☔️

received mine today but its open damage box and missing items cant build the screen. complained to aliexpress seller, paypal as my payment mode, and fedex tsk huhu hopefully they will do something

667 bucks on Alliexpress

I have one of these, I wanted to increase the printing area , is it possible? Can you change the size of the print area in the settings? I saw that there is more space between the moving car and the sensor on the sides of the table. I would also need to change the size of the table, do they sell? Thanks!

I have a elictrick scooter but is bison

I just bought this as my first 3D printer.. hearing the belts are loose I will try boiling the belts to see if they’ll harden up

Why does in the wheels say max load is 100kg when in reality it is 120kg

How to transfer files and where I have to do 3d model and slice

The AWOL 3500 will get you around 106 nits on a 120” ALR screen. Or u can buy a 98” 5,000 nit tv for around $2k.

Hi.. thanks for the informative video.. need to know where the projector placed ! and about how far ! Kindly share.

At this low speed of rotation just two blades can produce images. What if our atoms are rotated beyond the speed of light they can produce what we think is the Universe? We might be living in a holographic Universe.

Thank you for the helpful video.

Thanks for sharing, Nexi.

Very nice review mate thankyou

😊

46km with 86kg bodyweight?!! With which mode? D mode? Because it seems kind a unrealistic to me if it's S mode.

What’s the app?

super easy and cool from the chinese to make it that easy

For dual-head 3D printers that can use carbon fiber, we would choose from the following: １．QIDI i-fast ２．Flashforge creator 3 pro ３．snapmaker J1S