@@RazerCreditRazercredit …. I agree as of today vs at the time of first impressions. Spectrum is the best out the box rtr combo there’s been in years. The only thing that I WILL say is that I never confidently reached 60+ mph on the felony with the stock combo bcs it was just taking me a long time to get used to a 15lbs 1/7 scale vs a 4lbs 1/10 scale plus the added power. It wasn’t until I dropped in my first castle esc.. (regardless of which castle esc) but my valuable input is that the castle esc has faster computation. It responds faster and the power curve and brake curve are very precise and very smooth and accurate compared to the spectrum which ISSS good bcs it dumps power and is good for exactly hooning and aggressive off-road. But I like high grip applications and the castle suites me for that.

@@payel-g9j …. lol I can see it

@@muhammadrayyanaslam4671 ….. do you mean for the light? It was a COB led string. The Bugatti build is completed. There about 4 videos

@@muhammadrayyanaslam4671 ….. I also am thinking of selling the Bugatti bolide body with the skirts, front lip and 3D printed wing which I have not shown yet. I’ll do a video upload with the link for the body when I’m ready.

@@ElijahTVofficial ….. there’s this app called Rev-Headz, it’s cool as hell! I use the app and Bluetooth it to the rc speakers and you get the simulated engine sounds. I’ve also taken apart that key chain turbo and soldered the speaker out to an aux wire and plugged it into the BT speaker for the skyline. The turbo was triggered by a pwm switch I used to mix the throttle channel to activate the turbo.

@@keldonator …. Very very good actually! I still have the good year ones on.

@@toysforboysrc Awesome thanks

@@keldonator …. I also never used any chemicals to clean, I only ever use the air blower so that could contribute to it still having color saturation. But the integrity is exact as day 1.

@@keldonator … new vid update… kzbin.info/www/bejne/bJKXiWiKocSCr5Ysi=GFVYxPWvqbixdorm

@@lutherbabb1863 …kzbin.info/www/bejne/i5unY2BjqKybrtEsi=OGW5ETvPTNCD8GOY

@@itzskyfall … Thx yea I really like it too. I kinda want to use that on another bod.

@@DavidJohnson-rb2wi … thanks, I don’t recall anymore what was the situation back then but I figured out that the motor plate for the limitless is didn’t different from the felony motor plate. So it explains why my predicted ratio didn’t fit. So I bought the felony plate and I was able to gear the TP4070cm for 100mph bcs it’s not meant to be drifted or bashed but I’ve been doing so just fine with the ratio explained in the video…. Hm hey it’s actually time for a recap of the skyline followed by a remake or another body. Just sooooo many body options.

@@mikepedrin6460 …. Many people have asked, they were made by hand with building materials. I tried finding ppl who will CAD and resin print but I’m going to have to do that on my own bcs I could not rely on anybody. As for now they would have to be hand made again… I still have all my stencils.. unless I can find someone to possibly laser cut the parts from the same material, I could mass produce and sell as a kit you glue together. Until then, if I make and sell them by hand, it would have to be a price that the MAJORITY of my viewers will agree to pay and we can have this conversation in the comments. I’ll make a new video about the skyline headlights so I can gather all the people who have been asking for them. The more people that contribute, the better the price I can do. Does that sound like a good idea?

@@princemarcel …. Now I have to go see it lol. Hold up..

@@princemarcel … yea I heard the CRUNCH in advance but instead I got the hand of God lol. Dude, in the video with my skyline that I took to the night clubs with the girls in it, I had like 100 saves that night and it all looked like it was planned out but I broke the world record on the maximum amount of saves allowed in one night 😂😎. You should check it out.

@@sixnine6996idol …TY the last time it out was the most fun I EVER had with it! The following time I took it out after that was the worst lol but I didn’t load that one but I’ll show the damage. Thinking of either doing a new build with this chassis with the new Porsche body, but I’ve been open to suggestions.

@@scottm2398 …. 😁 that’s exactly what you get out of it.

If you could have a cage for another type of car, what car would you want to have with the cage.

Never needed one until driving with high grip. I bought a pair of velocity fans but never installed them but after what happened last month in when I did the Sarasota video, I pushed both my RC harder than ever before because of all the girls that were there watching. That’s what happens when you get a crowd am I right lol?

@@toysforboysrc 😂😂😎

Xcs6 pulls car look it up it’s a real thing.

Thanks I had fun making it! I met Devin Davis through a FB group he’s a really cool guy I wish I could meet for ppl like that in person. He told me all about his vision for this cage and concept for years before it came to reality by total chain of events, wild stories. I would LOVE to get to open up my cars on those salt flats I’m a little jelly 😆 but I totally think this cage is the peanut butter🤪😋.. my Skyline Build gave me 20+ videos I can only imagine what I could do with this cage! I want one so it’s a matter of time.

Nothing stopped you lol, you didn’t get to see this one in person

😄thx

I feel so bad for the times everyone has asked about the Skyline light buckets because they were hand made with building materials. Someone just recently asked about the same thing but I always do my best to post the product links in the comment section and or description section. However I DOOO have a good resin printer and complete station but I have not been able to set it up and “learn” CAD profile bcs of the current space available 😞 but we are trying to move to a bigger house 🥳 so I am trying. I still have the stencils and I want to build more skyline so that will happen soon as well. If I’m not mistaken, I made a video where I showed and shared my stencils for the headlight buckets. It’s in the Skyline Playlist. Crap I lied I didn’t… it was on the ARRMA forum while looking for someone who was willing to print them but it didn’t happen.

@@toysforboysrc Hey thanks for replying. I know you've probably gotten that question about a millions times. I'm always late to the party when it comes to media and YT. Sorry about that. If you find out where that video is that shows your stencils, I'd be happy to put them together in Blender and return the file to you. Not sure why no one has done that yet, but I've looked HIGH AND LOW across the web for an STL file for side mirrors, light buckets and windshield wipers for the Protoform Skyline Gt-R 34 body for the ARRRM Infraction.....Sadly, no one has made these yet. I'm probably going to find some other parts for different models that will look good, and just play with the sizes until I get a good print that fits. If I do that, I'll send you the saved STL file of the good print.

@@toysforboysrc Also! Good luck on the move!

That would be great news thanks for that😎 currently waiting to see if someone im talking to will get them done BUT I got something you’re gonna love.. his name is Devin Davis and he made a roll cage that bolts to the 1/7 chassis and is specifically designed to fit the skyline body like a glove. He also printed headlights and tail lights that install onto the roll cage so there’s no wires to the body. Here’s his FB. facebook.com/devin.davis.1291?mibextid=LQQJ4d

kzbin.info/www/bejne/aJrMXqCBh5Wpmrcsi=EQ8IzICAFfXssN6W watch this video it’s the best I can tell you for now.

🙏🙏 thank you for liking those lights🫡 I love them too! Even in the Sarasota video I just uploaded, everybody was complimenting the lights even tho they aren’t all RC enthusiasts. I made those from scratch and I shared all my product links with all the parts I used video by video. It was expended PVC foam board 1/8” thick and the lights are all over eBay and Amazon. They are automotive 12-14v led lights. For trailers, bikes, trucks exc.. the lights are cheap so in a pack you get 5 pairs 10 count… be sure you look at them closely and pick out the best for your rc. The wires are going to be very crappy but they have not failed. People also used those same led for the Felony and infraction bcs it’s easy to do just drill holes.. there will be two sizes, I got the smaller ones bcs of heat and voltage requirements.

a.co/d/cN39Tkt

a.co/d/bMzemXh

@@toysforboysrc can you send me the link where you got yours bc I have the same r34 body

Already did

Btw the burn smoke smell was coming from a piece of clear tape that was stuck to the motor

Hi Mitch 🫡🫡🫡😁😁 always nice to hear from you! I found a piece of clear tape that I used to block debris from going into the motor vent.. it’s been there since day one, never smelled… at the club sight the motor never passed 140°F but it was a nonstop run.. once home I found the tape partially melted and definitely stunk of smoke. To be honest that a good outcome lol. Seems to be due to the time duration of being at 140°F

TY

I actually took this one and another rc to Sarasota on a business trip and I beat the SNOT out of both cars at an intersection next to a pub that was jumping. The skyline was in mint condition before all this but I ripped them hard for 3 nights in a row!🫠 and melted the wheel off the skyline!! I’ll be doing an update video of this awesome tiny town and the rc’s very soon😎😎

Yessss sir🤙

Hi, it’s complicated… I “meant” to order it with an 8mm shaft but accidentally ordered one with a 5mm shaft. When I realized it several hours later I called to modify my order to an 8mm but it had already shipped, so before it arrived we already had the return/exchange lined up before I even made the video. Of course I was eager to see it in person bcs I never owned a TP before. I like to scrutinize things that’s just me, so I could not resist making the video bcs eeeeevery body has a TP but I NEVER heard or seen anyone talk about what I was looking at and it started a storm of ppl worrying😒but half said that it will brake in after a while and to be honest I never seen or heard of a failure from this clearance stuff, but this topic could go on for ever🤷‍♂️.. anyway I continued to proceed with the return and when the identical motor but with the 8mm shaft arrived, it also had a super fine clearance and spun better but at that point I realized that that’s just how TP motors are and I stopped worrying about it so I didn’t mention anything to not sound like a Karen lmao or like the picky guy that I am, but that pays off with clients as I’m a perfectionist. I never ever had any problems with my 4070 2200kv 8mm TP motor, but I truly got worried during that initial first unboxing ever. Tip…. I also noticed that although I bought it from (island hobby 🫶#1) I also did research on the actual TP motor website and I found a section that said if there is a factory defect, it must be sent to TP motors them selves for inspection.. so I was partially worried that I would have to deal with TP instead of Island Nut because TP doesn’t even talk to their customers which is why I went with Island Nut to begin with. I’ve had other customer needs with Island nut concerning more future purchases from them and the owner IZZY is a SUPER awesome guy. So after getting to know the staff, they really treat you good!

.. it was pretty eventful trying out a new TP motor for the first time after only having known what a 1717/1650kv is like.

4070 2200kv if I’m not mistaken. It went into the Skyline build. Playlist has about 20 vids.

I heard that the following model has compatible parts but idk past that. Proline usually makes replacement parts. I had a very hard time finding a small metal part for the steering block and had to invent something bcs the following model changed to pillow balls for the steering block. It’s basically a classic imo I keep mine put away mostly.

Don’t they take for ever and have no customer support??

@@toysforboysrc not really took about a week for me to get mine. Customers service I can’t really speak on never had to call them

Apexi II air flow converter. Stock ecu

@toysforboysrc I have a safc neo on my 03' b15 spec V. I'm getting a turbo kit I wanted to ask how's reliable has that's been for you? For turbo applications

@@dennisg3693 ….. I just recently traded the car for something else. I had it about 7 yrs reliable. The only thing I’ll say is that what ever you have your boost psi at is the boost psi that you’ll get across the rpm range and throttle body position range AKA gas pedal. This is unless you have a separate boost controller to make sure you don’t build too much boost too early. I did not have a boost controller, I only had a manual $30 boost adjuster valve. So I would not try to build boost past 0 psi until I at least hit 3000 rpm where it’s safe and will not lug the turbo. Still with trust in mind, you don’t want to go WOT on your turbo and Apexi controller until 3500-4000 rpm AND I would also not attempt WOT tuning until you’ve had the turbo build and Apexi long enough. One you get the hand of the apexi, you’ll learn the hi-low throttle tables and the hi-low fuel tables that correspond. At that point you’ll want a good AFR gauge and you will want to go to your “monitors” on apexi and choose the throttle percentage graph and two other graphs that you will need to monitor while doing a pull. Because this apexi does not log data like other more capable ecu, you will need to have those graphs I’m telling you about displayed on the apexi screen and your friend will need to record the apexi as it displays values and you while driving looking at your AFR gauge. You can also have the AFR next to the apexi where both of you see it but mostly so that you can record the live AFR with the live apexi values as to actually record live data logging. I got my shit running goooood.

@@dennisg3693 …. So with all that said… if you hit knock, detonation, pre ignition, you’ll have it recorded and with the ADDED BENEFIT OF AUDIO you can see and hear what’s happening and you can make changes as needed…. What changes you ask.., that natural comes after getting your car running first and driving it easy while learning the Apexi. My advice to you is to get ONE STEP COLDER on your spark plugs and close the gap to 0.25 and up to 0.30 MAX! This will prevent the spark plug from being blown out like a candle under high boost and it will ALSO prevent knock and pre ignition under high boost and high engine temps. The one “slight” downside is that the engine will take longer to warm up and you get cool pop and crackle sounds on every cold start.

@@dennisg3693 …. But dont expect to make boost with this 1step cold plug before your motor oil reaches 180°f

Oh boy here come the trolls no matter what the situation😆

Just having some fun with stuff laying around. There’s plenty Bluetooth devices for helmets .