6 ай бұрын
6 ай бұрын
9 ай бұрын
11 ай бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@primecalibur 12 күн бұрын
Really cool, trying to do something very similar but I have my consumer CRT on its side for proper vertical orientation for games like PacMan. Thinking leaving the bottom open in the front and just putting in a mini fridge too.
@MakeItSo 12 күн бұрын
Nice! I don't play enough vertical games to warrant something like that but those Candy Cabs from Japan actually built in rotating CRTs so you could swap the orientation depending on the game. So cool.
@primecalibur 12 күн бұрын
@@MakeItSo I've seen setups like that, absolute madness lol. I wouldn't wanna deal with degaussing a rotating CRT, not to mention I'd rather not open a CRT for proper mounting - easier to just keep it in the shell like you have here.
@wobblyrampack9655 23 күн бұрын
Superb tip with the knife and backing paper! Will be doing mine soon and am nervous! :)
@MakeItSo 23 күн бұрын
It's easier than you think. Do a couple practice cuts first if you have extra material.
@jxs_garage Ай бұрын
the integra sway bar makes such a difference on these cars.
@MakeItSo Ай бұрын
Good to hear!
@MigMonkey Ай бұрын
I love the dedicated "hot key" fix, might have to figure out how to incorporate this into mine. I bought the same cab on clearance almost a year ago, its still sitting int he box, never opened. Might be a great winter project.
@MakeItSo Ай бұрын
I was just playing this cabinet the other day. It still works perfectly after 3 years. If I was to do it again I would choose some lighter sprung, quieter buttons.
@Hugh_Jainus Ай бұрын
What a nice score that was
@MakeItSo Ай бұрын
It was! I ended up keeping several tapes for my personal collection and bundling up the rest and selling them on eBay. The CRT's ended up being pretty bogus in the end. Turns out they were in the trash for a reason!
@ToTBoO Ай бұрын
Do you by chance have the dimensions or plans to the arcade cab?
@MakeItSo Ай бұрын
Here's someones amazing guide I learned a lot from. I tried to copy the dimensions as closely as I could but I rounded the corners of mine. retromash.com/2016/05/01/building-a-home-arcade-machine-part-7-cabinet-plans/
@ericbilt25 Ай бұрын
I’m glad I came across this video. I wasn’t really down to bang the frame. I have a D series alternator sitting around ready to yank that pulley off. Thank you!
@MakeItSo Ай бұрын
Good luck!
@89GTFoxDude 2 ай бұрын
What sucks is that the bare plastic at the front of the dash next to the windshield often is brittle and cracked (commonly where that VIN plate is). Hard to find a used one not in similar condition. Unless you are lucky to find one from a low mileage, garage-kept EG/EJ Civic.
@MakeItSo 2 ай бұрын
Absolutely true. Every time I install or uninstall the dash I expect a new part to break.
@89GTFoxDude Ай бұрын
@MakeItSo Would be nice if someone makes a carbon fiber overlay that you can glue on with epoxy, not only for better looks, it strengthens it too.
@Enjoyyourselfnow 2 ай бұрын
Who else is here because of the Video Archives Podcast?
@MakeItSo 2 ай бұрын
Were they talking about VHS intros or something?
@not.jordaann9597 2 ай бұрын
I gotta replace the fan on the radiator everything ive seen keeps telling me replacement s only work on manuals idk much about cars but does that actually even matter i have an automatic
@MakeItSo 2 ай бұрын
I would assume the radiator and radiator fans are identical whether or not you have a manual or automatic. Use this link to lookup your radiator fan part number, then switch over to a manual transmission model line the Si and compare the part numbers. There were two different fan suppliers, so you may need to match the fan style you need, either Denso or Toyo. Which you may have to look at your car to determine. I think the main difference will be the plug to connect the fan to the chassis harness.
@MakeItSo 2 ай бұрын
www.cmsnl.com/honda-crx_model17251/
@miguelvelez4494 2 ай бұрын
Thank you so much for this video as well I did the same thing to a dashboard I scored at my local junkyard. Now mine looks fire 🔥 thanks to you 🙌🏾🙏🏾
@MakeItSo 2 ай бұрын
Sweet I'm glad it worked for you too!
@miguelvelez4494 2 ай бұрын
@@MakeItSohey bro question what was the paint code to that grey you did on the bezel?
@MakeItSo 2 ай бұрын
@@miguelvelez4494 oof I'm not sure. I don't think I have the can anymore sorry. But after I shot this video I ended up painting it the same black as the dash. I didn't like the Silver after all.
@travanti182 2 ай бұрын
Just got my rgb pi and I'm just curious how i enable a turbo button?
@MakeItSo 2 ай бұрын
Not entirely sure. I usually play with the controls for games as-is. Lookup how to open the retroarch menu, I know you can set it up in there.
@THEMARTIALARTSCHANNEL-bb4fx 2 ай бұрын
Its really nice. No light up marquee? 😭 Also, dont like the round speakers. Real arcades never looked like that.
@MakeItSo 2 ай бұрын
The marquee lights up. I do want to put some grilles over the speakers.
@michaelharless6278 2 ай бұрын
Awesome video. What wires did you swap at the ECM, and why? TIA
@MakeItSo 2 ай бұрын
Hey there! Thanks for watching. I have two videos that should answer your question. kzbin.info/www/bejne/i6qrqIyljbSqnqM kzbin.info/www/bejne/aqaraaZ4a9Kpe7c
@funnycargti5703 3 ай бұрын
Hmm can i use d series speedsenaor for my itr lsd gearbox to?
@MakeItSo 3 ай бұрын
I'm not sure about that. This is a Y1 cable B series transmission.
@bradleyhawks8689 3 ай бұрын
Hi man, great video. What wire stripper tool are you using? Thanks
@MakeItSo 3 ай бұрын
amzn.to/3TLMbHk I use one similar to this
@bradleyhawks8689 2 ай бұрын
@@MakeItSo Thanks!
@travanti182 3 ай бұрын
What scart to component adapter are you using? Also does this use retroarch to emulate? am i able to use cheats and everything that retroarch has to offer?
@MakeItSo 3 ай бұрын
The converter is by a company called Retrotink. I'm pretty sure this system is reteoarch based but you can check the Rgb-pi wiki for more info.
@travanti182 3 ай бұрын
@@MakeItSo Thanks for the info!
@miguelvelez4494 3 ай бұрын
Super nice bro love the color combo with the dash. Great job 🙌🏾
@MakeItSo 3 ай бұрын
Thanks! Appreciate it!
@CalmTurtle123 3 ай бұрын
Hey brother great video. Are you able to keep the AC in the car after the swap?
@MakeItSo 3 ай бұрын
Yep! Stock AC still fits exactly where it should.
@CalmTurtle123 3 ай бұрын
@@MakeItSo right on brother
@LightAt5point6 3 ай бұрын
The CBS FOX intro does it for me....I have been looking for years for that one!
@MakeItSo 3 ай бұрын
Yeah, it definitely triggers some memories.
@emigdiofernandez4543 3 ай бұрын
Hi there can u make a video how to adjust the coilovers for My honda Civic 2003 are like those u r instaling
@MakeItSo 3 ай бұрын
I don't think I'll have time to make a video specific to that but there's probably several if you search on youtube for that subject.
@troudecul69 3 ай бұрын
wow !! awesome build ! you are a true handyman
@dustinbradley1773 3 ай бұрын
I'm following in your footsteps, I've purchased the donor parts for the rear brake exchange. Did you purchase a bushing kit? Or did you buy the bushings individually? I need to replace everything under my car and the kit would be convenient, I'm unsure however if the kit for my car is compatible with the rear brake assemblies....
@MakeItSo 3 ай бұрын
I purchased a full suspension kit from Energy Suspension. In my case the rear disc conversion didn't change any of my bushing needs. I have lots of bushings I didn't use in the end, but some of those are for if you're replacing bushing on the factory shocks and things like that. I have coilovers so I didn't use them. But I think it's still worth it to get the kit if you want to do everything.
@matthewloughlin970 3 ай бұрын
Ik this video is old but please please please link or add the cabinet design and scale to the description
@MakeItSo 3 ай бұрын
I followed this guide. Exceptional amount of information here. retromash.com/2016/05/01/building-a-home-arcade-machine-part-7-cabinet-plans/
@lsvtec93eg6 4 ай бұрын
In the process of restoring my cx hatchback also.... i appreciate your content . Keep it up
@MakeItSo 4 ай бұрын
Thanks for watching!
@robotstampede 4 ай бұрын
Why the aftermarket fenders? Was it just easier for paint?
@MakeItSo 4 ай бұрын
They were an impulse buy when I first got the car two years ago so I figured I'd use them. I didn't do a good job of showing it off but the stock fenders have a bunch of dings, dents, and deep scratches. I figured this would save me some time, since I already had them sitting around.
@robotstampede 4 ай бұрын
@@MakeItSo I see, thank you! Fantastic content as always
@MakeItSo 4 ай бұрын
Thanks for watching!
@HiFiInsider 4 ай бұрын
first!
@MakeItSo 4 ай бұрын
Nice! Thanks for watching as always!
@corriganzeman7135 4 ай бұрын
How did those 4 torx for the spindle come out so easy for you ;-; i had to put a oxyacetylene torch on multiple of them so far, stripped two, theyre driving me crazy
@MakeItSo 4 ай бұрын
I guess it depends on the condition of the metal. I hit them with some PB Blaster then with the impact gun and they popped right off. When I did the same on my CRX I stripped one and ended up welding a metal bar to the head of one to be able to get it out. They are super frustrating.
@wildbluewings 4 ай бұрын
What about the United Artists intro? That was solid gold! 🤩
@MakeItSo 4 ай бұрын
I haven't come across that one yet in my collection but I'll keep an eye out for it.
@farrukhahmedvideo 4 ай бұрын
Is there a detailed guide with pictures for the engine wiring?
@MakeItSo 4 ай бұрын
For building the VTEC waiting harness? I go over it in it's own video. Most of the info I used for this swap came from here. honda-tech.com/forums/honda-crx-ef-civic-1988-1991-3/b16a-crx-swap-guide-1193782/
@rebuildbetter 4 ай бұрын
Keep up the work and the fantastic documentation. Enjoyable to watch!
@MakeItSo 4 ай бұрын
Thank you. Glad you enjoyed it!
@Woha91 4 ай бұрын
Круто. Гениально и просто
@MakeItSo 4 ай бұрын
Thanks for watching. I hope it was helpful.
@robotstampede 4 ай бұрын
Do you have the part numbers for those engine mounts or a link?
@MakeItSo 4 ай бұрын
I believe these are the ones I have but double check the fitment for your specific application. Seems like the price has gone up since I purchased mine. hasportperformance.com/products/egstk-mount-kit/
@robotstampede 4 ай бұрын
@@MakeItSo thank you!
@MakeItSo 4 ай бұрын
@@robotstampede No prob!
@sidney9534 4 ай бұрын
If you run into issues with highspots and "oilcanning" (the metal being stretched), I recommend using a shrinking disc. It worked very well for me and is more forgiving than acetylene torch and hammer.
@MakeItSo 4 ай бұрын
Thanks for the advice! Today I learned what a shrinking disc is.
@sogonexd9130 4 ай бұрын
Awesome build are you planning on doing the rest of the plastics in the interior black as well like the dash? 👍🏻
@MakeItSo 4 ай бұрын
Yes 100%. I also have black door cards from a 1995 Civic Si, and I'll probably pull the light blue headliner and paint it black as well. Thanks for watching!
@sogonexd9130 4 ай бұрын
@@MakeItSo awesome! I have a 94 si and I want to black out the rest of the interior that is painted grey like the front pillars/rear and the headliner 🤓.
@lsvtec93eg6 4 ай бұрын
The speedometer sometimes the solder on the back get dry and you need to carefully reflow the solder. If that doesn't work you can just replace the speedometer with another one it's just 3 screws
@MakeItSo 4 ай бұрын
Cool thanks for the info. I'll try some solder first!
@JoseContreras-mv5yz 4 ай бұрын
Damn I was expecting more,but I will wait😂. Good shit though.
@MakeItSo 4 ай бұрын
Thanks for watching. Yeah, I hope to get back into it as soon as possible.
@Darren_Martin 4 ай бұрын
That MAACO quote is absolutely ridiculous!
@MakeItSo 4 ай бұрын
I know, I couldn't believe it.
@HiFiInsider 4 ай бұрын
first! wow! $6100 for Maco is crazy.
@MakeItSo 4 ай бұрын
Tell me about it!
@russdiggity3060 5 ай бұрын
Touchstone, tri-star and orion were classic
@MakeItSo 5 ай бұрын
I can hear each one of them perfectly in my head.
@miguel-ye4dy 6 ай бұрын
Gonna do mine this week, gonna source the parts now lol thnx
@MakeItSo 6 ай бұрын
Good luck!
@oldskool1979 6 ай бұрын
My seats still great 1990 !
@MakeItSo 6 ай бұрын
Nice, Garage kept? I think the sun is the worst enemy of these older Honda's.
@oldskool1979 6 ай бұрын
@@MakeItSo yes
@darioalcala6995 6 ай бұрын
Great video inspired me to do a swap on my EF SEDAN . Maybe just a b20 . Can that be less stressful?
@MakeItSo 6 ай бұрын
Haha I don't know about less stressful. Good luck with your swap! Send me some pics when it's ready.
@erowry22 6 ай бұрын
Tri Star is so perfect
@MakeItSo 6 ай бұрын
One of the best!
@fijitears 6 ай бұрын
♨️♨️♨️
@MakeItSo 6 ай бұрын
Thanks for watching!
@buda3d2007 6 ай бұрын
Wedding singer is in every place that still sells DVD or VHS, its everywhere!!!
@MakeItSo 6 ай бұрын
It's the Adam Sandler effect. I would argue that Wedding Singer is his best film. For me it's just a matter of when it came out and how I first watched it. For me VHS tends to be 80's and very early 90's stuff. Sandler is on the cusp of DVD.
@charlesspinosa1590 6 ай бұрын
Boy, when will you ever be able find time to watch these. Maybe if you have a new baby or something and just have lots of time at home cuddling or something?
@MakeItSo 6 ай бұрын
Maybe! I've basically turned my home office into a video rental store at this point.
@crxseth 6 ай бұрын
Any HDDVD's? Haha.
@MakeItSo 6 ай бұрын
Haha, just biding my time till I get to work on my cars again.
@Bwana_01 6 ай бұрын
Since no one else mentioned it yet, that mountain biker is fit. It may be an ebike but he's covering a lot of ground very quickly.
@MakeItSo 6 ай бұрын
He rides neck and neck with the dirt bikes. We beat him uphill, but he smokes us downhill.
@Erik-rp1hi 6 ай бұрын
I don't know how many times I've ridden those trails. Since the early 70's when I was 13, nothing but trees for the restrooms. When 13 went out Tejon trail got lost had some hikers tell me go that way which was Pirute creek. That trail was frightening. Getting to Gold Hill road was the happiest day of my life. Still remember that ride to this day. My first experience being lost and sweating Gas on my way to big for pre puberty Bultaco 250 Pushang. Had a steel 1 gal gas can bungee'ed to the front forks.
@MakeItSo 6 ай бұрын
That's a great memory, thanks for sharing.