if the sun moves something could catch fire

I have to do this same thing to my son's floor joist. Question....is it necessary to use plates on both sides of the joist?

Could you build one with thicker metal top plate?

Isn't it also a point of mater keeping the water out?

I'm about to install this on my XJ today. Just got the Hooke bumper on. I like to watch a few videos to get some lessons learned and save myself some pain. Also, I don't know if it still is on sale but I got this winch $80 discounted which made it cheaper than the 9.5k winch I was gonna purchase. Might as well go bigger. Plus, I could always get the 9.5k winch if it goes on sale and put this on my '99 F350.

Your brass bushings are too tight you'll have to machine them down a little bit or take flat file on the outside of the brass bushing and a round file on the inside sometimes the shaft is not smooth I ran into the same problem

will you share a cut file?

The center springs get hot and week so what i did is streched it out then i made another ring and put it with the other brass ring it puts more preasure on the spring but it will lower top end a little but iam still in trial area with this but i hope it works better but i think the springs get warm and lose preasure to release the belt

So this is essentially a flitch plate but instead of the timber on either side of the metal flitch plate, the flitch plates are on either side of the timber?

I want to put one on mine too, wish ya lived by me, I would bribe ya to install for me! 🦃✝️🍅🏡🪴🏕️🦌🛻👀

Can someone tell me what the silver thing with 3 blocks he puts on the battery terminal is? And if it's what I think it is (circuit breaker) how to get it.

There is a risk with theses spikes though... they killed some of my trees. Not worth the risk.

Great video man ! Thank you ❤

Dang, you could probably make some decent money doing this professionally

Why not just let both animals live naturally in the wild…. Seems like a much better life for both.

Thanks for this excellent solution. I have the same problem and have been puzzling for several months over a way to level this beam and have it be stable and strong enough. Thank you again

Was just talking to my wife today about building something very similar,I like it.

I've used this product before. You can apply it while it is raining and will seal the cracks

How did you draw those up and on what program did you use?

I know this is better late than never; but the aftermarket 40 series I bought has steel slide bushings on either side of that big return spring. Comet uses self oiling bronze bushings there. They are number 203031a. You need 2. These should fit your driver clutch and solve your issue. It did mine anyways with the exact same symptoms.Cheers.

Why is the flat table on top so far up from the stove? You'll loss heat for cooking

What size tube did you use? I noticed the 2 different sizes. Thanks.

i have watched probably 9 videos about installing winches and you the first one to actually install the winch and not just wire it up. thank you

That would be crazy work in a crawl space..

Do you feel like 16x20 is the right size for your family? Would 16x24 be overkill for a family of 7?

Now that's funny...I don't talk to my phone so not run across this one...... LoL 😜

My wife's phone voice freaks out sometimes. It usually catches us off guard but makes us laugh every time. Has your phone ever done this? Know of a fix?

I'd like to see it burn a load of wood.....

Im concerned that the door itself is simply metal to metal fit and couldn't possibly be airtight ???

Superb job Gonna be doing this too Well done 👍

F%{&ing awesome

Thank you!!!!!

Wow this is interesting, could you adapt this to a pressurised system and run a steam electric generator for home use? Maybe also have lenses in multiple locations around the point of focus in order to compensate for suns movements..

How much damage could you do with a closed system?

What bumper is that?

One of the best I’ve seen, congrats. Amazing what a CNC machine and Mig can do in expert hands. 👍😃

What brand of high heat paint did you use? Thanks

What was the chrome part that you added to the Positive port of the battery?

❤

Just by experience, the wider your wheel base is , the harder it is to turn under full trailer weight. Also risk breaking your wheels.

Wondering if the welds still holding being the zinc coating fully contaminated the weld..

Great build man

Great build man

Great build man

Great build man

This sign at the front gate to Catawampus Ranch in Abilene, Texas. Outstanding workmanship! Thank you Rob & Candis for this amazing gift when we first decided upon the name for our small Ranch!!!

Thank you for sharing very infromational

I couldn't tell if you were mounting that straight to your bumper or on a mounting bracket? did you have to buy mounting bracket or what are you mounting to ? just straight on the bumper?

Would be nice if you told what series of CVT the spacing is for...

nice!