daniel murray

Пікірлер

@johnmurcott1273 21 күн бұрын

stampede eats 3s for breakfast, people have run them on 4s too sometimes, although im not sure as i havent done that myself (yet)

@foam_blaster 21 күн бұрын

@@johnmurcott1273 4s ran fine too. Not much gained so i went back to 3s

@CallmeSam00 23 күн бұрын

Where do you get the gasket from? I've got a lathe and want to make my own HPA core, but the gasket looks very.. specific. Is that printed TPU or a purchased part?

@foam_blaster 23 күн бұрын

@@CallmeSam00 it is a purchased part. They can be found at pneumatic stores. Find a qev valve with suitable specs then find the rebuild kit for it. The kit will come with the diaphram needed to make a hpa core

@ScottBionicBlasters Ай бұрын

Smart design, though I don't Specure was overly concerned with getting his fantastic product to the states, so far as I could ever tell. I suppose shiping was nearly as much as the product.

@BenDeLaCerna 2 ай бұрын

Hey man, ive been modding my stampede recently, mind sending the link for all the 3d printed parts you used? Thanks, Will be helpful.

@foam_blaster 2 ай бұрын

Awsome! They are my own design. Im currently in the middle of moving. I haven't set up my pc yet. But when i do ill post the files on thingyverse and drop the link here

@BenDeLaCerna 2 ай бұрын

@@foam_blaster ahh ok, thanks for taking time out of your moving to reply! I'll be waiting!

@foam_blaster 2 ай бұрын

@@BenDeLaCerna www.thingiverse.com/thing:6669569

@BenDeLaCerna 2 ай бұрын

@@foam_blaster thanks man! but what's the third part for?

@BenDeLaCerna 2 ай бұрын

@@foam_blaster and where'd you get the plunger rod + cap

@zacharylowell4300 2 ай бұрын

Whats tthw name of the blaster with the tank

@andee8872 3 күн бұрын

buzz bee big blast

@hanelyp1 3 ай бұрын

So many videos showing this or similar designs, this is the first I found that actually showed all the internal parts and how they work.

@foam_blaster 3 ай бұрын

Thats why I did it. I think it's important to document information in the hobby. Since we don't have a forum anymore this is my only outlet. I dont think social media is a good way to document this kind of info. In the old days the video would be accompanied by a nerfhaven post too

@StupidGuy1125 2 ай бұрын

@@foam_blasterhow did you get the orange rubber membrane? I want to make one of these that is 3d printed. I have already made a core and I have realized it’s really similar to your first version. I really wanna make HPA nerf more accessible by producing a better core.

@151buck4 Ай бұрын

Did you ever find Out? @@StupidGuy1125

@watcher4669 4 ай бұрын

Untuk yg kedua sepertinya itu cara kerja QEV,dan anda memerlukan 2/3 Valve, beda prinsip kerja nya dengan yg pertama 😊

@jetwiseman 4 ай бұрын

and can I by one

@jetwiseman 4 ай бұрын

I love your vids

@rosendapilar1057 4 ай бұрын

Can send me in the philippines

@foam_blaster 4 ай бұрын

Yes

@rosendapilar1057 4 ай бұрын

I like that air soft

@the3dpenguy613 5 ай бұрын

You could remove 1 tooth from the rack, if you’re an airsoft guy you’ll know about shortstroking an aeg

@foam_blaster 5 ай бұрын

Yea, iv thought about doing that. I dont think it would be effective for this application though

@johnmurcott1273 21 күн бұрын

the pt doesnt have a great deal of volume. you really need all of it.

@AppleBeesBarAndGrillMenu 7 ай бұрын

THANK YOU SO FUKING MUCH!!! I LOVE YOU DUDE!!!

@NessusHindmost 7 ай бұрын

Bringing me WAAAAY back, haven't thought about Nerfhaven or the Vortex in years, I wonder why the algo showed me this! Keep it alive man, I'll go pull out my st3k and see if it still works.

@foam_blaster 7 ай бұрын

Awsome! Happy to hear it !

@samdavidson6483 7 ай бұрын

Cool blaster man 💯

@Shaznazabbadaz 7 ай бұрын

Came out beautifully! Jay is gonna love it. Would love to build my own someday.

@Sillybutts 7 ай бұрын

Very nice

@doriansc1 7 ай бұрын

Cool to see a new design which can trace its lineage in part all the way back to the ESLT being released in the year of that blaster's 10th anniversary (iirc it came out in 2014). I'll never grow tired of seeing people come out with new homemades.

@foam_blaster 7 ай бұрын

Thank you. The ESTL is one of my favorite homemades.

@doriansc1 7 ай бұрын

@@foam_blaster Mine too!

@caverncreature 7 ай бұрын

I thoughtvit was an anti tank rifle :/

@doriansc1 8 ай бұрын

I love seeing all of these old school builds!

@Blizzard117 9 ай бұрын

What happened to the hpa cores?

@foam_blaster 9 ай бұрын

Still have them. One is in a blaster and one is on my desk

@alantruong8546 9 ай бұрын

I wonder for the drilling jig piece that you had to mill if you could have printed it standing up such that neither reference face is facing the build plate. To avoid drooping on the top of the plunger pocket a trick is to make the top part of the cylinder a tear drop so the last bit is no longer an overhang.

@foam_blaster 9 ай бұрын

I think it probably could have been printed. For me its fast and easy to mill but i think it is definitely possible to print

@PirateJohnson 10 ай бұрын

Gonna bite the CommentBait to tell you to fix the title, please.

@foam_blaster 10 ай бұрын

thank you. cant believe I missed that....

@samdavidson6483 10 ай бұрын

Great blasters man.

@foam_blaster 10 ай бұрын

Thank you !

@ethanbremner3356 Жыл бұрын

A video guide on barrels and old stefans would be so cool!

@foam_blaster Жыл бұрын

I think so too, i will do a small series to preserve the old knowledge

@Thedprintingpotato Жыл бұрын

How did you cut the dart chamber in the brass? Like how did you make the hole without cutting the barrel in half?

@Thedprintingpotato Жыл бұрын

do you have measurments for the pvc and brass?

@foam_blaster Жыл бұрын

The pvc is 1\2" and the brass size will depend on the darts you use. If your darts are thinner you will need 17/32 barrel with a 9/16 slide breach. If your darts are fat you will need 9/16" for tour barrel and the next size up for the slide. I don't have the length measurement. This build is 100% by eye. Guess and check type work. I may have mentioned some dimensions in the video but i dont remember.

@Thedprintingpotato Жыл бұрын

What size of brass did you use for the barrel? Because it goes inside of the 17/32

@oknelson6520 Жыл бұрын

Where do you get that rubber diaphragm? The closest match Ive found was a bass diaphragm but i’m afraid it wont work the same as yours

@foam_blaster Жыл бұрын

I dont think that will work. You need a diaphragm made for quick exhaust valves. Ill look for the part number

@captcade2913 10 ай бұрын

I’m looking for the same thing dude

@feb4862 Жыл бұрын

Hey! Do you do commissions for old school blasters?

@foam_blaster Жыл бұрын

I dont do as many as I used to but yes I can make all the old school stuff

@feb4862 Жыл бұрын

@foam_blaster wicked! Could I have a quote form you? What is your preferred email?

@foam_blaster Жыл бұрын

@@feb4862 [email protected]

@actjng Жыл бұрын

Bro please make an updated guide with exact measurements because I want to do this to a rare longstrike and I don’t want to mess up 🙌

@HeadPatsForCats Жыл бұрын

Theres plenty of stuff in face book groups

@HeadPatsForCats Жыл бұрын

Tbh id try doing it to a different one like at the thirft store you find for cheap so if you mess up at least its not the expensive one

@tychoriddersgames Жыл бұрын

I love your videos man!

@foam_blaster Жыл бұрын

Thank you!

@samdavidson6483 10 ай бұрын

So cool.

@asliceofnerfpizza8549 Жыл бұрын

Huh, I just modded mine the other day as well. Chicken mentioned reinforcing the ring in front on the plunger as that tends to break itself, and mine was in-fact cracked. Figured I'd mod it while I had it open. Just waiting on my barrels to show up. Funny timing

@asliceofnerfpizza8549 Жыл бұрын

I also used the pvc glue method from your guru vid to attach my polycarb reinforcements. Thanks for that

@foam_blaster Жыл бұрын

Awsome! Would you mind showing me what you did ? Id like to reinforce mine too. [email protected]

@lmodder6475 Жыл бұрын

Hey Danny, do you have a link of where I could buy some of that PETG tubing?

@foam_blaster Жыл бұрын

I bought a lot of it from Mc master- carr many years ago. If your in the US thats the best place to get it.

@lmodder6475 Жыл бұрын

@@foam_blaster Yes, but what diameter specifics?

@foam_blaster Жыл бұрын

@@lmodder6475 it will depend on your darts. They have many sizes available. At the time of purchasing this petg the nerf hobby was very different. I was still makeing my own darts from FBR. I had very large diameter foam. If you want the exact part number I ordered it is on nerfhaven in the barrelmaterials guide. Its way too big for today's darts though. Ill try and find the part number

@foam_blaster Жыл бұрын

@@lmodder6475 2044t43

@99chuck99 Жыл бұрын

I love stormies <333

@lmodder6475 Жыл бұрын

Extremely well done! I'm glad you emphasized your point on why not to use k26. I came to the same conclusion myself too. What spring are you currently using in there?

@foam_blaster Жыл бұрын

Thank you! I am using a k25 with a few coils cut off

@builderbb8767 Жыл бұрын

I really appreciate that your documenting this old NIC tech. Great looking Guru

@foam_blaster Жыл бұрын

Thank you! More to come. My plan is to document all of the old NIC knowledge I have

@wadekirby8575 Жыл бұрын

I'd be interested in videos about old school tips tricks and MODing techniques.

@foam_blaster Жыл бұрын

Good to hear, I will do my best to document all i know