Flex Your GINIVEX - Custom Contest
11:17
Stand for the Micro Galaxy GHOST
9:23
Sabine TIE Raffle - DRAWING
6:20
6 ай бұрын
SDCC GIVEAWAY - Winner Part Deux
1:02
SDCC GIVEAWAY - Winner!!!
1:07
Жыл бұрын
SDCC TIE Interceptor GIVEAWAY
4:17
Пікірлер
@aminbagherloo1444
@aminbagherloo1444 13 күн бұрын
Thank you for video,Do you recommend this device or vibrating sanders like Proxxon 28594?for 3d printing
@rebelscale
@rebelscale 13 күн бұрын
I was using this one a 3D print, and I've used it since to remove the print lines. I like it. It will eat through sandpaper, so get some adhesive-backed paper to replace it with. But I think something corded like this is the way to go. The battery-powered ones don't seem as strong. I haven't used the Proxxon though.
@rebelscale
@rebelscale 13 күн бұрын
Looking at the Proxxon, it is cheaper, but then you have to buy the transformer station if you don't have it already. I would imagine they are comparable in performance.
@razif6916
@razif6916 15 күн бұрын
i like your attention to details, its because of you i got a few of these MGS to pair with some of the Bandai kits.
@rebelscale
@rebelscale 15 күн бұрын
Thank you, man. I'm glad my videos helped.
@josephdemille3354
@josephdemille3354 16 күн бұрын
This is such a great idea, Rebel Scale!
@rebelscale
@rebelscale 16 күн бұрын
Thank you.
@damongraham1398
@damongraham1398 17 күн бұрын
How would you design a Mandolarian era U-wing? I would make the main body longer and wider. It would have the same hanger footprint. Just have the s-foil swivel vertically. The length of the main body would have the nose even were the blue paint starts. Add a single mount dorsal laser turret between the engines. Instead of 4 engine just 2 styled like the engines from the A-wing. The doors would be true airlock. The outer door would slide forward. The inner door would stay close while in space and have a half sized pocket door that would also slide forward. In atmosphere the inner door will open outward like a ramp to allow a fast mass exit. The longer main body length will allow 4, 1 sentient cabins. 2 on each side forward of the doors. The engine bay will have a bed for the engineer that lifts into the ceiling. The engine bay will also have a pocket door airlock. That is my plan for a kitbashed Mando era U-wing.
@rebelscale
@rebelscale 15 күн бұрын
That would be cool to see.
@dperricone7172
@dperricone7172 19 күн бұрын
The Ginivex capital ship is gorgeous, though I liked so many of them I think the customization work that went into it definitely puts it a step above. Well done and congratulations to the winner!
@afterburner94
@afterburner94 20 күн бұрын
This is absolutely awesome and props to everyone who participated. I really enjoyed watching this vid. Amazing workmanship by talented modders. This series idea was genius. So glad you hosted that! Thanks!
@rebelscale
@rebelscale 20 күн бұрын
Thank you
@toodlesX14
@toodlesX14 20 күн бұрын
These all turned out awesome! Very inspiring, thanks for putting on this contest.
@rebelscale
@rebelscale 20 күн бұрын
I'll hopefully do more in the future
@DrDuck37
@DrDuck37 21 күн бұрын
This was such a cool idea! I hope you plan on doing more, sadly I heard about this too late but I hope to compete in the future!
@rebelscale
@rebelscale 21 күн бұрын
I definitely hope to do more
@etheangel2220
@etheangel2220 21 күн бұрын
The GinivX-wing was my favorite!
@kingpatriot
@kingpatriot 26 күн бұрын
Just found this at target I love the WW2 bomber look
@rebelscale
@rebelscale 26 күн бұрын
Right? I love this design. So fun.
@afterburner94
@afterburner94 Ай бұрын
Hey! i'm the guy who invoked you on the MGS FB group about the heat gun trick ;) I see its a bit of a hassle to get the plastic off nicely. Regarding the e Wing, my only drawback is that i would have loved the cockpit canopy to slide forward like in the show, but thats already a fantastic ship.
@rebelscale
@rebelscale Ай бұрын
Yes, hey man. I agree it would be better to have it sliding, but it would be more fragile too I think.
@afterburner94
@afterburner94 Ай бұрын
@rebelscale mods are already popping on the Facebook groups with a sliding canopy, i'd be very interested to see how these guys did that!
@rebelscale
@rebelscale Ай бұрын
@@afterburner94 yeah I saw Helmy did one. Great work
@doctordetroit1217
@doctordetroit1217 Ай бұрын
Beautiful design, I also get a WW2 vibe, but I see the Japanese Zero, this should be a twin pack!
@rebelscale
@rebelscale Ай бұрын
Yes, Zero, Fw 190, P-47...so many possibilities. But now that you mention that, a Japanese-inspired Aotake interior green would be cool
@ShootingwithAngel
@ShootingwithAngel 2 ай бұрын
The fins are very weak just for everybody's information I got mine today and both of them snapped off nothing hot glue couldn't fix I was just really annoyed that it happened especially because I really like micro Galaxy squadron
@rebelscale
@rebelscale 2 ай бұрын
Oh no. They do look a little flimsy, but I didn't flex them to find out.
@Razgriz911
@Razgriz911 2 ай бұрын
I don’t know how they make a profit these designs are so well done!
@dk6419
@dk6419 2 ай бұрын
This is definitely onenof their best designs with the e-wing. I really hope i can get merok.
@pipoms
@pipoms 2 ай бұрын
I NEED ONE! I love this design , i hope to get one soon
@rebelscale
@rebelscale 2 ай бұрын
It is a great design and model.
@love-and-grace
@love-and-grace 2 ай бұрын
Hi! How did you manage to replace the trigger?
@rebelscale
@rebelscale 2 ай бұрын
I bought the Eclipse Takumi trigger from Tag Team Hobbies. I like it a little better, feels better to me.
@CloneCommanderCrater1102
@CloneCommanderCrater1102 2 ай бұрын
This is great, I've been looking for a video that goes over this book for so long. This might be a big ask, but is it possible for you to remake this video with the lights moved a bit? Because they were really reflecting off the book and made it hard to see a lot of the images.
@rebelscale
@rebelscale 2 ай бұрын
Thank you for your response. I know the lights messed up things a little. I unfortunately don't have a good place to do a book review, especially with glossy pages. My desk is set up for modeling, not books. I may redo it at some point, but not any time soon.
@BobGarrett66
@BobGarrett66 2 ай бұрын
Maybe someone else mentioned this but you can take a large eraser and run it over the sandpaper. If you don’t wait until the sandpaper is completed gunked up, it’ll last quite a while. Just a tip.
@rebelscale
@rebelscale 2 ай бұрын
Yep[, I have an eraser just for that purpose. It doesn't work forever, but it keeps it workable for much longer than usual.
@fabianrocha9924
@fabianrocha9924 2 ай бұрын
That is so awesome! Wish it included the Clone Scout Troopers and the Coruscant 41st Troopers but other than this is so great!
@rebelscale
@rebelscale 2 ай бұрын
Yeah, they could have added even more if they wanted
@williamsquires3070
@williamsquires3070 2 ай бұрын
(@0:30 or so) Um, no. It’s closer to HO scale (1:87) - N scale is 1:160. 😊
@rebelscale
@rebelscale 2 ай бұрын
"in scale with the figures". I don't know train scales enough to ever use them correctly.
@ThePokemondongos
@ThePokemondongos 3 ай бұрын
There's a wheels Landspeeder in the same scale, i think that was released in 2021 , i dont remember well
@rebelscale
@rebelscale 3 ай бұрын
Yes, the Hot Wheels is very close, as is the Titanium. I don't have the Hot Wheels on hand though.
@NewtonDKC
@NewtonDKC 3 ай бұрын
I want that Landspeeder soooooo bad! I have my R2 from the X-Wing and 3PO from the escape Pod to ride on the back!!!
@rebelscale
@rebelscale 3 ай бұрын
I hope you get one. It's a small, but really cool model.
@joesshop3622
@joesshop3622 3 ай бұрын
The bit assortment is repetitive almost...no radius bits though wtf lol. I'd order one otherwise...
@rebelscale
@rebelscale 3 ай бұрын
Yeah, I've modified one of the bits already to a gentle curve
@JarebAsher
@JarebAsher 3 ай бұрын
Going to try to get something ready for this.
@rebelscale
@rebelscale 3 ай бұрын
Do it
@JarebAsher
@JarebAsher 3 ай бұрын
@@rebelscale I'm as far along as painting now, taking pics to follow.
@mr.miniaturesmodels8465
@mr.miniaturesmodels8465 3 ай бұрын
2:43 - fail… E-Wing canopies slide forward like Naboo N-1’s (not the MGS but in canon). Won’t be buying this one…
@rebelscale
@rebelscale 3 ай бұрын
It's a minor change. But you have to have something kids can easily open and close.
@kevint1911
@kevint1911 3 ай бұрын
At this scale I believe the sliding mechanism would be hard to replicate.
@rebelscale
@rebelscale 3 ай бұрын
@@kevint1911 Exactly. And looking at the stills, I don't think they animated how it would slide; they just made it slide. And of course, Legends E-wings had a hinged canopy like the MGS.
@mr.miniaturesmodels8465
@mr.miniaturesmodels8465 3 ай бұрын
No… no no… no… Minor point: Jazwares is targeting the adult collectors evidenced by the chase versions AND the prices seen on eBay etc for those very hard-to-get releases Major point: the U-Wings have sliding doors on both sides of their undercarriages. They are (the U-wings) a near perfect example of an accurate copy of the cinematic U-Wings. Jazwares keeps upping their quality with each series. They CAN do sliding canopies..
@rebelscale
@rebelscale 3 ай бұрын
@@mr.miniaturesmodels8465 The U-wing's door is much bigger and thicker, and the mechanism is huge. To put that on the E-wing would look bad, especially with how the nose narrows (not an issue on the U-wing). Not to mention if it was thin, it could easily break. People have already broken landing gear because of how tight they were installed. I think the pop up canopy, which is how it was in Legends, is a good compromise of playability and not making it bulky or overly complicated. It's still a great display piece. But I do get the desire for something a little more accurate. I'm still angry at how inaccurate the LAAT was.
@etheangel2220
@etheangel2220 3 ай бұрын
I've been wanting an e-wing for years, since playing the Rogue Squadron game series... then I realized that it was the V-Wing that showed up in those games. 😅 Still this is a cool ship and I would buy it if I saw it in stores!
@rebelscale
@rebelscale 3 ай бұрын
Classic V-wing would be cool. Loved those cluster missiles.
@etheangel2220
@etheangel2220 3 ай бұрын
Take that Tanner 😂!
@rebelscale
@rebelscale 3 ай бұрын
Hehe. Finally first. I savor the win.
@toodlesX14
@toodlesX14 3 ай бұрын
This is my most wanted MGS ship, really hope I can find one. I love the greebly break-down, it's awesome to see how much care was put into this design. I think the E-wing redesign is exceptionally well done, the hawk shape for the nose really gives it a great sense of identity that the old design was lacking.
@rebelscale
@rebelscale 3 ай бұрын
Thank you!!
@solarrage11
@solarrage11 4 ай бұрын
Where did you get the preset handle?
@rebelscale
@rebelscale 4 ай бұрын
@@solarrage11 that's from the High Performance Plus line. The threads are the same, so you can buy the handle and put it on an Eclipse.
@0rdmantell
@0rdmantell 4 ай бұрын
I love your joking logic on Jazwares making a Star Destroyer because it’s included in the insert, and all of the other ships on the insert have been produced. It would be awesome, but a 1:72 scale Star Destroyer would be about 72 feet and 11 inches long (1/72 of 1600 meters is 22 1/9 meters). It would be about four stories tall (but some of that would be the bridge tower). You’d have at least two stories of livable space through most of its interior.
@rebelscale
@rebelscale 4 ай бұрын
Oh yeah, I've joked with a few people about that. There's been several ask for a Star Destroyer, and I tell them, "well, you're gonna need a train to bring it to ya." Perfect calculations BTW
@madluper
@madluper 4 ай бұрын
Words of wisdom.
@reevrob
@reevrob 4 ай бұрын
I know it's one of the first releases, but I never bought it. This, however, is a good idea. I'm sure there's an inspiring custom somewhere.
@rebelscale
@rebelscale 4 ай бұрын
I hope so. Personally, I kinda like the ship, but I get the disdain for it continually being on the shelves.
@mauricioromero3132
@mauricioromero3132 5 ай бұрын
Great stand and review , thanks!!!
@paulbila9430
@paulbila9430 5 ай бұрын
Great stuff! I especially love the cargo attachment 👌👌
@rebelscale
@rebelscale 5 ай бұрын
@@paulbila9430 thanks man!
@josephdemille3354
@josephdemille3354 5 ай бұрын
This looks great!
@rebelscale
@rebelscale 5 ай бұрын
Thank you!
@IndyFencer51
@IndyFencer51 5 ай бұрын
Seeing the wingspan difference I hope they release a repaint or Armada edition where they correct that and the mold issue. Preferably as a common because the current B-Wing might as well be a chase/rare where I am.
@rebelscale
@rebelscale 5 ай бұрын
Agreed. They could easily do some other paint jobs for it.
@richardstiers9010
@richardstiers9010 5 ай бұрын
would this benefited by having a thin foam backed sanding paper? I find this feature on sanding sticks most helpful, by comparison, like using a file vs sanding stick, They feather and blend out the area.
@rebelscale
@rebelscale 5 ай бұрын
Yes I would agree. I think if you could find some sticky-backed foam sanding pads, those would work great. Maybe cut out some command strips to attach. I think I might try that myself.
@joesshop3622
@joesshop3622 3 ай бұрын
Foam backed anything can sometimes leave high spots due to the give associated with foam. If you desire perfectly flat with minimal deviation you want minimal flex. Direct taping.
@dosdont
@dosdont 5 ай бұрын
Too expensive and not on amazon
@rebelscale
@rebelscale 5 ай бұрын
You get what you pay for. It's definitely worth it.
@dosdont
@dosdont 5 ай бұрын
@@rebelscale "worth it" is always subjective, there's similar products that work well for less than half the price and easier to buy on Amazon.
@joesshop3622
@joesshop3622 3 ай бұрын
Too expensive? REALLY? Did you want it made from paper? Would you rather it fails on day two? Do you want those frail bendable bits with it? How about a 2pc. assortment included? Perhaps a 3 foot cord is enough...to save money. You might reconsider unless you only purchase landfill items. Just my 2 cents...no inexpensive stuff will go the long haul or have the bits made from hardened steel in a nice assortment. How about all gears made from steel vs plastic? Maybe a rubberized tool shell vs plasticized crap that only slips in your hands. Those looking for cheep tools today are in for a rude awakening lol. BTW Amazon sucks ace! Pricing reflects millions of returns from all those looking for a deal.
@dosdont
@dosdont 3 ай бұрын
@@joesshop3622 *Did you want it made from paper?* Grow up, the thing probably cost $5 to make in China, spare the greed apologist nonsense, and when you see this reduced in price or disappear, you'll know I'm right. Price is ridiculous. You're entitled to your opinion, it's in the video. You're not entitled to be rude and not expect it back.
@dosdont
@dosdont 3 ай бұрын
@@joesshop3622 Grow up little boy
@dougwestling4526
@dougwestling4526 5 ай бұрын
just found one today. awesome paint
@jennpa77
@jennpa77 5 ай бұрын
I don't mind varients being chase and rare but odd that the landspeeder is listed as a chase.
@rebelscale
@rebelscale 5 ай бұрын
Agreed. Rumor is that it will be re-released in a Battle Pack. And it should be the last unique Chase.
@plutoyaldnil4750
@plutoyaldnil4750 6 ай бұрын
That guy says " north east gets the shaft" try being in Canada walmart is no longer carrying the line.....toys r us...yeah wow they have most of series 1 and wont even carry the smalls....best chance we have is to take trips to lower states every few months😢😢😢😢😢😢
@rebelscale
@rebelscale 6 ай бұрын
Yeah, I have a buddy in France, I buy for. It is so hard collecting these outside of the States sadly.
@kamenraider1175
@kamenraider1175 6 ай бұрын
Pity I found this channel 2 weeks after this video
@rebelscale
@rebelscale 6 ай бұрын
Don't worry, I'll do more giveaways in the future
@Razgriz911
@Razgriz911 6 ай бұрын
wait omg....if they made hera x-wing then what was the big bad she fought against in the show?......oh god i hope they make "THAT" ship lol
@knighthawk3759
@knighthawk3759 6 ай бұрын
I'm hoping for somebody this weekend to do a review of the infiltrator as it's supposed to be released this weekend nothing has shown up at any of my targets
@rebelscale
@rebelscale 6 ай бұрын
@@knighthawk3759 I definitely want to do a review on the infiltrator as soon as I get one in. I also want to do the AT-TE as well
@BraveSeriesFan01
@BraveSeriesFan01 6 ай бұрын
Man Jazwares has been really bad at distributing these, I didn’t even know the Landspeeder was even out! It’s been a consistent issue since Series 2 and it’s disappointing to see they haven’t gotten better about this. I’ve been trying to get the Tie Bomber, but it’s impossible to find it anywhere.
@unimatrix82
@unimatrix82 6 ай бұрын
Im sad, all i have left of the 90's Acton Fleet vehicles is a B-Wing.
@rebelscale
@rebelscale 6 ай бұрын
It's such a good line. Some pop up from time to time at decent prices. The TIE Defender and E-wing on the other hand are hard to get.
@allthehardtimes
@allthehardtimes 6 ай бұрын
Only youtubers seem to have this amazing luck finding chased while im still staring at pegs of series 1 and v wings ...maybe i should start a youtube channel
@rebelscale
@rebelscale 6 ай бұрын
This was very much luck on my part. Southeastern US doesn't usually see much
@SamoraNate
@SamoraNate 6 ай бұрын
Congrats to the lucky winners!
@nyxand
@nyxand 6 ай бұрын
Congrats to the winners, nice job Jon! If you do more raffles in the future I’m in!
@rebelscale
@rebelscale 6 ай бұрын
Thank you!!