You must have the most REALISTIC auto repair video on KZbin. I feel your pain taking off stuck parts.

Top tip: use a shorter socket. It will help transfer more of the impact to the bolt and keep the socket on the bolt. You should only use sockets and extension when you need to and go short when you can.

Thanks!...I did this......

😂🤣🤣😂

Very helpful for my 2016 STI, thx

thanks for the simple straightforward video

Thank you for the video. What are car manufacturers thinking? The inbuilt tensioners have worked nicely for years. Change is good they say? lol.

Do you still have the set? Does it still work?

Thanks for the vid. Was lazy and didn't read my service manual. Have '08 LGT and '17 STI. The legacy has tensioners for both belts.. The STI no. I bought the Gates tool 91031 since it would arrive the quickest. A 5 minute job with the tool. Helpful vid.👍

I calibrated the needles a bit different. Instead of pushing down with my finger I took the needles off and I tab back on

Beautiful

Thank you!!!!!!

thanks for the video because the instructions from Gates belt install tool were absolute useless & garbage...

thanks ! Save $ $ ' s !

Appreciate it bro

My northstar linking water I have find it

If your level is full, and getting The Check Coolant Level messsge, either have the surge tank replaced, or the free way “ if you have no leaks”. Take a screwdriver and tap around the bottom of the surge tank. It will go off. It will come back on randomly when it’s stuck, but it’s free.

Not sure if anyone will see this but I just changed the stepper motors and bulbs on my 03 escalade and now NONE of my gauges work (the bulbs do thou) idk wat I did wrong. Also the gear and my odometer display no longer working any and I mean any advice or tips would be appreciated thx

I got all the needles perfectly accurate I go to drive my truck the next day they are all wrong

What its the name of the tool?

Thanks for the video. Had the tool but it's been so long since I used it, I forgot 😅

great vid, man! gave me the confidence to do this myself!! do you have thoughts on how GM gas gauges specifically can be calibrated as accurately as possible? (i never believed the gauge previously, as I am not the orig owner and if always seemed to show higher than the digital readout because i ran out of gas several times! ;) )

this whole mess or convert to a tensioner from an 04-07 sti.....hmmmmm

Question how hot should the solder gun be

Useful video, thanks for posting. Notes of caution to thers: check you have the belt routed correctly with reference to the tool and look for a decent quality tool, like in the video, which has a rounded edge to feed the belt on to the A/C pulley. I used a Chinese version, cut from aluminium plate, and it damaged the edge of the belt.

There is a sensor in the tank thats burnt, replace that for $20

Some good points I sent my display out for a rebuild and I have noticed now at 70 it reads 68 mph the oil is lower then when sent out I guess I will add calibration to my to do list I have a scan tool so I can check it Thanks

On the temperature gauge accuracy. Do you think the "actual temp" is in Celsius vs the gauge in Fahrenheit? 100 C just happens to be 212 F .

I learned yesterday there are 2 small holes one on each side of the bell housing about half way down you can put large screwdriver in to hold the engine from turning while removing subaru harmonic balancer from my 96 subaru with an automatic transmission......

Couldn't I use an impact drill?

Thanks man

sincere thanks for taking the time to share this procedure:>)

Little tube or hose on top of coolant reservoir with clip what is that?

Very professional

Video really helped thank you

What a wimp!

Beautiful car my dude. I would LS swap or BBC swap transmission swap. I have a 72 buick electra 2door HT with a 496stroker. My opinion, it's frustrating how hard it is to find proformance parts for my 455 rocket 🚀 and limitations in modifications. So I decided to motor swap. 455 to a 496stroker 400turbo to a 40L80. She sitting on forgiatos 6s. It's on my Facebook page and instagram.

TooMany Tools - Have you ever noticed that ALL KZbin video screens are HORIZONTAL? Your phones may be "smart", but not nearly enough. Same for their owners.

Great video bro, driving 8hours to chicago tomorrow to pickup a mint eldorado... has the same issue!!! Thanks!

What a stupid concept.

Well, it appears that 'Occam's Razor' (commenter below) has decided to baffle us with condescending bullshit. So much for the simplest explanation, eh dude? Let me try: You gotta keep it square on the nut, and using a shorter socket helps with that. See? Simple. TMT obviously knows that, because he kept squaring-up the best impact socket he had between rounds. So whatever on you, OR. Anyway, I bought a Power Bar too, on the 'Car Wizard's' recommendation. In fact, you can buy one from his Amazon store. Plus, he used one in a 'Hoovie's Garage' video and it worked like a charm. Unfortunately, it was a minor side-note in the video, and not fully shown or explained. I suspect it's the angle between the two arms that is the key, and I'm off to find out if I can.

Thanks for the video. I spent a lot of time looking at videos from real users of these tools versus the talking heads that simply open the box. I’m glad yours are holding it. I just picked up a used impact and drill off of Craigslist but with only one battery. What do you think about those cheapy aftermarket batteries? I might try some and see how they go. Thanks again for the review video.

It works just fine, you just lack motor-coordination. You kept twisting "off-plane." If there was a circle intending from the center of the crack pulley nut at 90 degrees (simply put; same plane as the harmonic balancer. Just "enlarged" to the length of the PowerBar's arm) and whose diameter is the length of the arm on the PowerBar, you had the PowerBar "inserted" at a few degrees off-plane, which would result in the socket slipping of the nut when the rotation reached "apogee" (or aphelion. Depending on whether you prefer the Sun or Moon being the basis for the analogy XD)

Had nothing but issues screws fell out of the head and broke sent it back twice now don’t like the paddle trigger at all switched my stuff to snap on

Good review 👍🏼

Thank you

Autozone has a new coolant reservoir and it comes with the sensor for $25, and it is easy to install you could do it yourself. Also the new tank in autozone is clear so a lot better to read.

912-400-759five

I do not understand by when you say I stripped the wires

I just purchased the 3/8 ratchet..I bought 2 Chinese batteries...they fit pretty tight.