I ordered these graphics from MXPRODECALS, but when they arrived, they looked more like greenish. In your video, the graphics look kind of brown or mocha color. Do you recall seeing them greenish color? Thanks
@larevitzear7 күн бұрын
Is this rampley trail?? I own the trail head out here
@limitlesspowersports7 күн бұрын
@@larevitzear Yessir , it is part of it.
@KRmotorsports7 күн бұрын
What shock are u use ?
@limitlesspowersports7 күн бұрын
@@KRmotorsports 2021 yfz 450r fronts, with factory 700r rear. Rocket ron revalved all 3 for us 🙌
@KRmotorsports7 күн бұрын
@@limitlesspowersports Rocket Ron ?
@KRmotorsports7 күн бұрын
Where can I buy? Thanks
@limitlesspowersports7 күн бұрын
@@KRmotorsports The Raptor?
@MatthewC13721 күн бұрын
You can ride anything you want on the roads of Wyoming. ATVs, SxS, dirt bikes are all legal and you don't even need a turn signal kit.
@limitlesspowersports21 күн бұрын
Nice! This is brand new to GA. I will definitely be paying the $20 to get a tag on the x3
@JisanKhan-i2o21 күн бұрын
Thompson Scott Davis Mary Miller Jennifer
@YugDtf-p8o22 күн бұрын
Thompson Michael Martinez Amy Anderson Christopher
@ОктайМехмедов22 күн бұрын
👍👍👍👍
@DubsAtv22 күн бұрын
was there a reason you chose to install the skid plate without standing it up?
@limitlesspowersports22 күн бұрын
fuel tank is on and full of fuel, Sometime it will leak and cause big mess... kill the glue on your graphics, kill your seat cover, cause staining under the seat
@swartzkoft788623 күн бұрын
Where can i get that seat cover ?
@limitlesspowersports23 күн бұрын
@@swartzkoft7886 Jason @fourwerx carbon can hook you up
@owenslaughter273723 күн бұрын
Picking up a 2024 raptor 700 this weekend. What are some things I need to do once I get it?
@limitlesspowersports23 күн бұрын
@@owenslaughter2737 The dealers never grease the steering stem bushings, half the time they forget to grease the a-arms, and rear wish bone also. Set your tire pressure, loosen the low speed comp on your stock shocks, set ride height for your weight, there are a lot of small things you can do before your start getting into performance parts 💪
@owenslaughter273722 күн бұрын
@@limitlesspowersports thank you for the insight. I am very new to this community and want to make sure my new raptor is taken car of, for reliability and longevity. Thanks again
@limitlesspowersports22 күн бұрын
@@owenslaughter2737 If you are in GA come see us!
@LuisGomez-kn7fy25 күн бұрын
Where can I buy that seat
@limitlesspowersports25 күн бұрын
Fourwerx customs
@HabakkukDunn29 күн бұрын
896 Hahn Trail
@keshawncooley7937Ай бұрын
Do you have a parts list link bro?
@limitlesspowersportsАй бұрын
@@keshawncooley7937 Check out the video where I go over price break down on the Raptor build. All of the parts are listed there
@poorwhiteboy6521Ай бұрын
How much did the hess linkage lower the rear ? I'm going to order one. For dune riding
@limitlesspowersportsАй бұрын
@@poorwhiteboy6521 I would say 3/4 of an inch but I also did the Rocket Ron revalved rear shock at the same time. I would highly suggest getting with Rocket Ron. He can also help you with the Hess link
@MalcolmGoodman-f6wАй бұрын
Hey my brother from the Bahamas, I have 2020 raptor se it’s stocked looking to upgrade it can you recommend and lead me in the right direction ?.
@limitlesspowersportsАй бұрын
@@MalcolmGoodman-f6w if you are looking for power I would remove the air box lid / grab a fuel customs intake. A good full exhaust like dasa or RP race. Then a PC6 using one of Cuervo racing tune files. If you are going for looks a set of bead lock wheels always improve the look of any Atv
@willie1978Ай бұрын
where can I get a plug for a Dasa exhaust?
@limitlesspowersportsАй бұрын
@@willie1978 the large wash plugs that Rocky Mountain sell will fit on the very last rib of the plug
@matthewmcrae1104Ай бұрын
Awesome vid. Are those stock size tires or did you go up in size?
@limitlesspowersportsАй бұрын
@@matthewmcrae1104 Thank you 😎 yes stock height 21 front 20 rear.
@javygee9458Ай бұрын
Wat size ur pegs?
@limitlesspowersportsАй бұрын
It has been awhile but these look like the 12” pegs from Factory 43 ATV
@willie1978Ай бұрын
As of now, have their been any complaints about the cam cover?
@limitlesspowersportsАй бұрын
@@willie1978 No leaks so far. It does fog up while the engine is running
@willie1978Ай бұрын
@@limitlesspowersports then im taking mine off lol... I can't rebuild stuff like you man. You and cuervo have THE best pages for atv builds, mods and info man. Thanks!
@limitlesspowersportsАй бұрын
@@willie1978 Thanks 😎 The Raptor build will hopefully have a part 2 coming out soon. Parts got back ordered.
@willie1978Ай бұрын
@@limitlesspowersports awesome one last question and I'm sorry if i'm bothering... i have the stage 3 cam ordered, and the Big 3 installed currently. Does this raptor have the factory piston? or the stock one?
@limitlesspowersportsАй бұрын
@@willie1978 Stock piston still in this one. For now if it has an issue I will probably stay with std bore / std compression. Mostly trail riding so it’s hard to use the power it has now. I could only imagine what more would be like
@monstaworld54492 ай бұрын
Great video
@Dangelo-n8i2 ай бұрын
I have an 2024 yfz450r with just an hmf slip-on what’s some more nice price range things I can do to mines..
@Dangelo-n8i2 ай бұрын
I have an 2024 yfz450r with just an hmf slip-on what’s some more nice price range things I can do to mines..
@Dangelo-n8i2 ай бұрын
I have an 2024 yfz450r with just an hmf slip-on what’s some more nice price range things I can do to mines..
@Dangelo-n8i2 ай бұрын
I have an 2024 yfz450r with just an hmf slip-on what’s some more nice price range things I can do to mines..
@Dangelo-n8i2 ай бұрын
I have an 2024 yfz450r with just an hmf slip-on what’s some more nice price range things I can do to mines..
@limitlesspowersports2 ай бұрын
@@Dangelo-n8i on a budget mods would be the easy pull clutch arm. A good cases saver like moose racing. A set of GBC tires. A gripper seat cover from fourwerx carbon
@thenixonklan63082 ай бұрын
Awesome upgrades!!
@badass96ta2 ай бұрын
Any suggestions on how to set up stock se suspension for a 240lb rider? Mainly trail and dune riding and I like to jump.
@limitlesspowersports2 ай бұрын
Almost all sport atvs are tuned for 175lb rider. But even if you are 175lbs there is still some tricks that can be done to make them the best for your riding style and skill level. You could start by setting ride height. I do 7.5 pegs 8” under the radiator. If you can’t get the ride height set it’s best to go ahead and send the shocks for to rocket ron to get valved / sprung for your weight. For trail riding go ahead and back the low speed adjuster all the way out. Loosen the rebound at the bottom of the shock to speed up the travel. High speed compression is personal preference
@naterussell60252 ай бұрын
where are you located?
@limitlesspowersports2 ай бұрын
Woodstock GA
@brevynhanson99032 ай бұрын
So I got a 2008 yfz 450 se. I wanna change it over to these colors. What is the the color for frame and where'd you get the graphics. And would r plastics fit on an 08
@limitlesspowersports2 ай бұрын
Performance powder coating in Dallas GA did the work on the frame. They would have the color saved if you are interested in it. Graphics I use mx pro decals. I am not sure on the plastic conversion. I have never tried it
@brevynhanson99032 ай бұрын
@@limitlesspowersports ok thanks.
@brevynhanson9903Ай бұрын
@limitlesspowersports what is the color code for the frame if you have it
@gillesdevaux-ej1xc2 ай бұрын
Il est à vendre combien Gilles de France dans quel pays vous trouvez vous est t il homologué pour rouler en France merci Gilles
@limitlesspowersports2 ай бұрын
@@gillesdevaux-ej1xc Not currently for sale.
@paulwerkheiser87053 ай бұрын
Where in north georgia is it free
@limitlesspowersports2 ай бұрын
Core land but I wouldn’t suggest it 😅 they will give you a ticket
@paulwerkheiser87052 ай бұрын
@@limitlesspowersports if they catch you LOL
@poorwhiteboy65213 ай бұрын
Hey I just got set of the houser +2 a arms. What did you finally set them to ? You said you had them at -2 I'm going to sand dunes what a good starting point. And the hess linkage lowered your rear one inch correct ? Did you leave the front stack ride height or did you adjust your springs down ?
@limitlesspowersports3 ай бұрын
For now I left the raptor with the ball joints rotated forward. I have not had time take it back to the trail to test ride yet. Yes it has the Hess linkage in the rear. Rocket Ron built the shocks for this set up. I set the ride height to his suggestion. 8’ front 7.5’ rear
@scopas40133 ай бұрын
Love that bronze color!
@shrike55733 ай бұрын
what oil do u use and what do u recommend?
@limitlesspowersports3 ай бұрын
In my personal bikes I use Amsoil
@shrike55733 ай бұрын
@@limitlesspowersports Do you use the amsoil dirt or the atv/utv oil?
@AdamFarouk-sg6pg3 ай бұрын
hey limitless powerpsorts. I have a concern i want to confide in you. these yfz 450s, many youtube content creators say the clutch is a ticking time bomb, they claim to say the clutch basket is no good. Im just asking you if that would be a good idea to swap out the factory basket for a hickson clutch. I have a 2024 yfz450r by the way. Would really appreciate your help because im scared on if my brand new bike's clutch will explode and ill have to jump thousands of dollars just to fix it and im scared to invest in such an expensive clutch, id really appreciate your help on this. Looking forward to hearing back from you soon.
@AdamFarouk-sg6pg3 ай бұрын
there is the normal hickson clutch basket and there is the hickson clutch kit
@limitlesspowersports3 ай бұрын
I have personally never got a phone call bike from a YFZ 450r I sold that the clutch basket exploded. I do have upgraded Hinson clutch baskets in my YFZ 450r I race. If you have the budget it’s not a bad idea to swap out known weak points. But as far as it being your first mod day one. I would do big 3 first
@Kx853963 ай бұрын
That looks bada$$
@Bandditt3 ай бұрын
VERY NICE ! Helped me alot brother!! 👊🏼🤙🏼🤙🏼
@AdamFarouk-sg6pg3 ай бұрын
hey bro, got a 2024 yfz 450 r se. Got a hmf eliptical exhaust on it paired with the dynojet power commander, same one like yours. Im getting the same uni filter. Could you tell me the map i need to use for it? It has never been dyno tuned. Also, i would also like to know the map for just the hmf exhaust with the stock air filter with the lid off. Thats the only mod i wanna put. An airfilter. Abd could you tell me the name of that oil/ grease you were using to lube the filters. Thanks
@limitlesspowersports3 ай бұрын
What power commander do you have? It will need a Dyno tune file. I sell ours for PC5, full exhaust, no air box lid for $100. The filter cleaner & oil I like for UNI is no-toil you can get it on Amazon or Rocky Mountain. It will last you a good amount of time.
@AdamFarouk-sg6pg3 ай бұрын
@@limitlesspowersports hi there, i have a dyno jet power commander 5. I dont understand what you meant by PC5 but i would like to know what you meant by it. I was thinking of a getting a full RP aftermarket intake. But i dont know how to tune it to that. That is the only negative part for me. I dont have nor know the tunes and in my country, we dont have any dyno tuning facilities here unfortunately so you gotta tune the stuff yourself
@josh133693 ай бұрын
Went to Duran town last weekend for the first time and I immediately knew I needed to check my air box when I got done riding 😂
@josh133693 ай бұрын
Duramtown
@limitlesspowersports3 ай бұрын
Yessir! Every ride haha
@WiscoWilly3 ай бұрын
Do you have an aftermarket rear link or is the shock set up to make it sit lower?
@limitlesspowersports3 ай бұрын
Yes, I am using the Hess linkage.
@GeaniApostu2 ай бұрын
@@limitlesspowersports
@rossierengineering57143 ай бұрын
awesome work
@premium11884 ай бұрын
i’m looking for a rp race for mine, but don’t know if i should get the shorty or regular. assuming this is the regular, is it loud?
@limitlesspowersports4 ай бұрын
Yes I did the regular length. I like the sound. The tone is a little deeper. I had a 2023 Raptor do a shorty, pc6, FCI last week. The sound from the shorty is a little pitchier and does put up a little bit more power up top
@raptorider834 ай бұрын
Who did your graphics kit? That's the final piece.I need to finish my build. I Had hunt racing do a kit for me but After seeing the holographic graphics, I really like those. They're sick looking..
@limitlesspowersports4 ай бұрын
MXprodecals does my graphics. Yessir! get the holo finish while its in style
@mistylake932826 күн бұрын
@@limitlesspowersports Heck ya brother do they ship to Utah?
@limitlesspowersports26 күн бұрын
@@mistylake9328 I do, just hit me up on Instagram.
@raptorider834 ай бұрын
That was my understanding. It reduces bump steer from what I have been told which I don't really have to worry about too much i have a precision steering elite . i'm setting up my raptor for cross country. I appreciate your response and enjoy watching your videos. Thanks for your help and advice, When everything is complete. I'll shoot you a vid of it on the ground all ready to run.
@limitlesspowersports4 ай бұрын
Yessir, I have 4 videos I need to go through and edit. looking forward to posting more.
@raptorider834 ай бұрын
What offset front tires are you running? I just ordered 4+1 dwt A5 also running same A arms, but now watching the video again I'm wondering if I should have ordered 3+2 ?? I've got the Lsr axcalibar +1+4 axle and I'll be using oe rear hubs, and 3+5 rear 9x8 wheel, but without having the 4+1 in hand im curious if I'll be able to match the rear width with the front or be within a ½in or ¼in ... do you have any insight on this if I'll be able to match the width front and rear or do I need to order 3+2 offsets. I can't be wider than 50in due to going behind gates were we ride id like to be 47½ 48in.. thanks man
@limitlesspowersports4 ай бұрын
I can only speak for 4x1 front, 9x8 rear with yfz hubs. It’s ok for the rear to be a little more narrow than the front
@raptorider834 ай бұрын
Oh those are 4+1? If so im good. Appreciate your response bud..
@limitlesspowersports4 ай бұрын
@@raptorider83 Yessir 4x1 will get you better steering feel as well.
@matiasavila88634 ай бұрын
You put the "Cuervo" map for single exhaust and Stage3 Hotcams no? Where i can search thar file? Or another files? I have only a exhaust (stock air intake and camshaft)... Thnks!! Amazing machine!!
@limitlesspowersports4 ай бұрын
Thank you! I would suggesting getting the FCI intake, then emailing Daniel at [email protected] to purchase the Dyno tune file
@2_whys4 ай бұрын
I’m getting big 3 on my 2024 yfz and would like to know a good place to dyno tune it. Great vid btw
@limitlesspowersports4 ай бұрын
I have the dyno file we install on customers bikes I can send you for $100. if you are looking for you bike to go on the dyno I am in GA so I only know of shops in FL that do it
@josh133693 ай бұрын
@@limitlesspowersportsthere is a place in Macon ga. It’s called 5 star small engines. Really good guy that owns the place.
@chief11934 ай бұрын
Can you buy one like this, already done
@limitlesspowersports4 ай бұрын
You would have to get on the list with me and go over what all you are looking to get. Long travel shocks are custom built for the riders weight and riding style $1,100 so it needs to be set up for the rider the first time. Total build cost was around $19,500
@trx450rlove24 ай бұрын
Beautiful build buddy,I've got the 06 model an love it very reliable quad!