I have a 40v that flashes all 4 lights 6 times when you press the button. Is there any way to lookup what that indicates?
@gd.ritter4 күн бұрын
@6:50 "Loupe" is pronounced the same as "loop". It's a word English stole from French. Many variations on the same premise will be called some description loupe. Like Jewlers Loupe, Dentists Loupe, etc.
@trailerparkbarbie28824 күн бұрын
so do you have to decarb your weed first or not????! i'm so confused..i get mixed answers about the decarb process?
@michaelmalone90627 күн бұрын
Outstanding presentation.
@thecityviking6 күн бұрын
Thank you!
@jcharron00312 күн бұрын
What are the chances you’ve had to fix this thing when the charging cables have been replaced and the block has been replaced and the battery has been replaced but it won’t charge, all she does is flash red quickly then slowly Amber and blue and white (all at once it’s a pretty light show) slowly then back to red flashing? B&O sent me a 30% off voucher because I’m out of warranty. I would gladly give you my voucher if you can show me how to fix my speaker. I want my baby to work. I don’t want one of the new ones - I can’t afford it! Also if you know how I could convert the rechargeable aspect of this thing to make it fully plug in only, that would be my dream come true!
@YoMattFizz22 күн бұрын
Or you could just put a wire to join the two nodes to factory restore the thing and take away the signal that doesn't allow it to charge anymore....
@goodun297423 күн бұрын
The inside diameter of cheap direct-from-China tips tends to run about 4.15 to 4.3 mm, for a very sloppy fit and poor thermal transfer. It's worth purchasing high quality tips direct from Hakko USA or from some other authorized electronics specialty distributor. The ID of my Hakko tips is 4.05 mm....
@jmagelitz28 күн бұрын
Bought this practically brand new at a yard sale for $10 because of this issue. Hope this fixes it. Thanks!
@dirtydwarf69Ай бұрын
I ALWAYS choose Kamora over Kahlua ;)
@CharcoalPlayerАй бұрын
It says FAIL
@kriseme4734Ай бұрын
❤❤❤
@Zombieufo5900Ай бұрын
Old fashioned way
@jennpreston8614Ай бұрын
How much would I use if I have already decarbed it.
@RoyGage-d1v2 ай бұрын
Have you had any experience with the 40v Ryobi op40404? Total different board version 1.4 Will not reset. Shows 39.5 at battery,18v at terminals? Can not locate fet, thanks for any input
@kevinkauffman5222 ай бұрын
GREAT video - thank you!! You said, "don't charge these without being attentive", does that mean the charger will/can overcharge using this modification? Any insight you can share about your warning would be appreciated!!
@fabricebonnier13112 ай бұрын
thank you it works perfectly
@basildog0072 ай бұрын
Fastest recipe: take the exact amount of weed you want to ingest, put it in a glass, add an inch of full milk, put it one minute in the microwave. But not one full minute, I used to open the door as soon as it started to boil too much. So one to three times probably. I used to do this with hash. Choco-hash... Fast, precise, efficient, on the go.
@basildog0072 ай бұрын
Long lasting
@kudakoda2 ай бұрын
So if I watched the vid as carefully as I thought I had. You poured in the coffee liqueur in both then poured tequila in one and vodka in the other before adding coke and milk. Aren’t you supposed to have coffee liqueur, tequila and vodka in each ??
@thecityviking2 ай бұрын
No. Actually, only coffee liqueur and vodka makes a proper paralyzer, but I sub tequila in the one because that's how I like it. I have heard it called a bulldog in some places when you sub tequila for the vodka. I also sub captain Morgan's spiced rum for the vodka. I guess we could call that a paralyzed sailor. Thanks for watching.
@DistroidVR2 ай бұрын
I have done this twice now worked first time now baking the second time
@thecityviking2 ай бұрын
Great! Happy baking!
@duckyducky24972 ай бұрын
Great idea to convert a Sonoff Basic R2 to a simple Sonoff Relay device even there are similar Sonoff SV to do the job. It doesn't hurt to try one to get to know more about the Basic R2 device. Thank you for your time. Well done.
@thecityviking2 ай бұрын
I think the low voltage sonoff was more expensive, at least at the time I made the video. Thanks for watching and commenting.
@duckyducky24972 ай бұрын
@@thecityviking Possible. Thank you.
@drewmurry17612 ай бұрын
Just wanted to say thanks for this video, I've just been diagnosed with cancer n ina bit of pain ..told not to smoke anything anymore so I had a cracknat these with dry herb (and one with the dust from a munching machine) I prob made em too string with 1tsp or more in each one n man as a 40yo bloke that's been smoking since I wasa teen I can honestly say I've never been more stoned in my life lol but more to that it almost completely took the pain away ..thankyou man soo much, bo idea the relief I felt after downing one even tho I as you said nearly melted from it lol was apretty much pain free melt lol might dial it down for the next one or 2 or eat less but yeh 100% this did the job. Mu h appreciated mate 👍
@thecityviking2 ай бұрын
Cancer sucks. I recently lost a close friend to it, and my wife has pain from it as well. My wife and lost friend both were able to control discomfort and pain with the weed cookies. I wish you luck in your journey. Stay positive and happy baking my friend. :)
@drewmurry17612 ай бұрын
@@thecityviking cheers mate :)
@canberrafinest3 ай бұрын
not releasing the pressure from the 0V cells?
@denizgunes64463 ай бұрын
Merhaba, yokuşlarda çıkabiliyormu yüklü şekilde?
@thecityviking3 ай бұрын
Loaded with 4 kids under 5 it will easily go up hill.
@denizgunes64463 ай бұрын
@@thecityviking teşekkürler
@eric1469993 ай бұрын
Great information and video same thing wife said she was shown by nurse but kept spilling did not screw it in thank you again hope wife gets better wife had liver transplant
@thecityviking3 ай бұрын
Thanks for the compliment. My wife has some intermittent related pain in her side, but is otherwise doing very well. I hope your wife is doing well. Thanks for watching.
@emersonandaubrey67403 ай бұрын
I've got an older version of this 40V with the single fett (spelling?). I have 38V from Negative rail to postive terminal. But only 17v from negative terminal to positive terminal. So something in that fett is holding me back?
@thecityviking3 ай бұрын
Sounds like the FET may not be turning on or is damaged.
@ktdaagoat3 ай бұрын
Lol no wonder why I always feel like edibles are a little to strong and always give me a overwhelming feeling body high. I have a high weed tolerance but rarely do edibles and I make mine the exact same way as you but I always use a gram for one cookie. and i’m talking about a gram of some good strong weed😂🤦
@ktdaagoat3 ай бұрын
I thought that was the norm😂🤦
@thecityviking3 ай бұрын
:) I like to sneak up on my high and then maintain, but I am also lightweight. Thanks for watching
@JohnBotero-e1o4 ай бұрын
Thanks ... Keep posting honda videos
@thecityviking3 ай бұрын
You are welcome. Generally speaking, my honda runs well, but at 200k, I may be making a few more soon. Thanks for watching.
@shelbyrodrigues4 ай бұрын
Are you doing this daily? Do you ever flush more often if you see the “sludge”/ sediment?
@thecityviking4 ай бұрын
We don't have to do this anymore, but we would do it a little more often if it seemed "sludgey". I hope things are going well with your drainage tubes. Thanks for watching
@finnTheConquest4 ай бұрын
I'm trying to this, but after calculation, I decided to use 35mm cable 3 turns Because if I use 25mm cable as original and goes 4 turns, heat will be I^2R, Secondary winding goes double means double resistance and double current, that make 8 times heat than before, so I use 35mm cable goes 3 turns try to cancel that extra heats out.
@thecityviking3 ай бұрын
Lek me know how your mod works out. Thanks for watching.
@Prudenprocom4 ай бұрын
Lol i love the comments here. ❤
@thecityviking3 ай бұрын
Me too.
@keithmarshall61264 ай бұрын
Can you do this using hashish ?
@thecityviking4 ай бұрын
I would think that it should work, but I have never tried it. Thanks for watching.
@TheAndzhik4 ай бұрын
I have one battery dropping voltage. Reset didn't do anything. The second battery has 1 cell group at 0V. What can I do in these cases?
@thecityviking3 ай бұрын
Sorry, but it sounds like the cells are done. Thanks for watching.
@TheAndzhik4 ай бұрын
Can I charge individual cells through soldered connections on the board without disassembling everything?
@thecityviking4 ай бұрын
That's exactly what I would try. Make sure all banks of cells are charged to the same level and try it again.
@jarrellestes17935 ай бұрын
Thanks! great video
@thecityviking4 ай бұрын
Thanks for the super thanks!
@jarrellestes17935 ай бұрын
To Save not opening case? Pluggable pin hole above ground. To rase voltage above charge requirements, with your charger? May help?
@jarrellestes17935 ай бұрын
Accessed grd & voltage points on 18v with accessing in plastic case. no Chang in board change. Is this a good idea?
@thecityviking4 ай бұрын
I think that's a great idea.
@carolgeorge8455 ай бұрын
If you eat the whole cookie it wouldn’t matter how much is in each cookie would it? It would be the same regardless 😂
@thecityviking4 ай бұрын
I have read this 5 times and am still not sure how to answer this. Maybe I'll bake on this. :) thanks for watching
@wrestler4life5215 ай бұрын
Excellent video. I tore mine apart and noticed the board looks different than yours. There's a large glob of solder closer to the negative terminal. I've tried boosting it enough to get recognized by the charger by charging it at 1amp 31v from power supply, but only get one blinking light and still won't get recognized by the charger. I ordered a DC DC voltage booster and hoping that can do something since I can jump the voltage to 40 or 41v vs the 31 that my power supply tops out at. I saw another comment where you mentioned to check the voltage of each individual cell and balance the cells. How do you do that when this back is assembled in a way where I can't get terminals to the parts of each cell pack that I need to?
@thecityviking4 ай бұрын
The board measures the voltage of all the banks of cells, so you should have access on the board. You may have one of the newer boards that is very different, but all cells should be accessible from there.
@cdoublejj5 ай бұрын
so you can't charge without odin mode?
@thecityviking5 ай бұрын
Odin mode is for loading firmware if your device is acting up.
@youceflagendary5 ай бұрын
Is his processor i5?
@horspielecke2.0-dukannstmi825 ай бұрын
@thecityviking is the baking time and temperature for CBD similar to THC?
@thecityviking5 ай бұрын
I am not sure, but I think it's about the same.
@cbtuacay43105 ай бұрын
The current Beolit 20 series has quite a few fake speakers, they are very similar to the genuine product, and can even connect to the B&O app. Will the Beolit 17 series be less fake?
@seven_auras5 ай бұрын
Would a battery tender work?
@ducamuk5 ай бұрын
It would have to be a 40volt tender. I don’t even know if those are available. ✌️
@evecll5 ай бұрын
This is some poor man crack head bullshit. I've been around pot for a while, and this is straight dirt squirrel bud. This ia some dirty ass poverty shit
@thegreenjackleog24345 ай бұрын
I agree it make more sense just to buy new bud or even grow it lol very ghetto and hurting if it works for you good but still very gross
@DIVISIONBYZEROE6 ай бұрын
I followed your recipe to a T and I got so horribly sick. I was in the hospital for 3 days. Ended up having really bad gastroentiritis that appeared on a scan as a small bowel obstruction along with 4 peptic ulcers that they detected. Super rough time. I wonder if it was related. In any case I want to try this again, but I don't know what went wrong. It could have been just my diet or poor health habits but im not sure.
@thecityviking6 ай бұрын
Sorry to hear you got sick. How much weed did you ingest? While I do not think that it was the weed from your description of your problems, please be careful. Thanks for watching.
@DIVISIONBYZEROE6 ай бұрын
@@thecityviking Edit: it was not the weed, it was the same ratio as you used in your video. It was definitely unrelated. I baked more and had others try them, they told me the cookies turned out great :) thanks for your concern and thanks for the cool idea! its so quick and easy
@uhadonejob6 ай бұрын
Probably another option is getting a 120 V to 220 V transformer box. Takes a regular 120V power lead. You can usually get a 1000W for $25 used. Best to verify the case isn't electrically hot though.
@thecityviking6 ай бұрын
There is usually more than one solution to a problem. Thanks for watching.
@c05vh1nguyenuchuy56 ай бұрын
I just found uot reason why my blog ac did't run because of the thermo of mine just popped , i was so desperate until found ur clip thank u for ur trick u my life savier
@thecityviking6 ай бұрын
Nice to hear positive results! Thanks for watching.
@DB-fd6ho6 ай бұрын
thanks for the help.
@thecityviking6 ай бұрын
You are welcome. Thanks for watching.
@Astroid4206 ай бұрын
Okay I'ma do this
@thecityviking6 ай бұрын
Sweet! Happy baking. :)
@robertsimpson85036 ай бұрын
Thanks for the video. it was very helpful
@thecityviking6 ай бұрын
You are welcome. Thanks for watching. :)
@videray68126 ай бұрын
I used a finish nail and a straight pin to clean the gook out of the pits in the charging pins and finished it with a Q-tip soaked with cleaner/degreaser. Works now, whereas it would not charge at all beforehand. THANKS for your video that inspired the fix. I've had this watch for 7.5 years, and it is still ticking thanks to your video.