Thank u so much for this! My clothes actually get wet now!

Okay i broke it😂😂😂ill keep going😂😂😂😂😂 thanks though you go girl. Theres a deep fill option button.

To Off Grid North Idaho, Thank You, Thank You, Thank You. We have put up with very low water levels in our Samsung Front Loader. I followed your instructions and it is absolutely bloody perfect now! You are a dead set Legend! Thanks again from Lake Cathie Australia.

I have that but my controller looks different….

I'm trying to learn about solar. Thanks for sharing. Much Blessings to you. 🙏 Lord-Jesus-Christ ✝c✝o✝m

Is there a setting to change when you run 2 batteries?

I like your videos. I bought the kit if i only want to use one 25watt panel can i bypass the connector? Instead of connecting all 4

How do you change the maximum volts?

Great video very informative straight to the point and well spoken thanks for sharing!

Thank you very much, sister - this is exactly what I was looking for! ❤

Thanks! A awesome detailed description of how Thunderbolt charge controller works! You are the best!

I still refer back to this video when I forget how to use it.

Amazing! You are an inspiration. I live here too so I understand the challenges.

So if you turn off the light button, there’s literally no difference in the normal setting and the boost setting.

This is modifying a manufacturer’s design, This is dangerous! When you change something like this, you have NO IDEA what else will be affected. (if you have to remove exterior panels to access something, then the manufacturer doesn’t want you to access it). One of the benefits of front loader machines is that they use less water and clean better. The machine shown with lots of suds is NOT BETTER. It will actually make poor washing results. On front loading washers, you must use HE (high efficiency) detergent. It does not make suds like that. Suds will cause a leak that is not truly a leak. The door seal can’t hold back suds. And no, this will not make it fill any faster or with any more pressure. (pressure and flow rate are different things and are unrelated to level which is measured by weight).

well done

Never underestimate a smart female with electronics

Have you thought about a solar generator

Doesn't the wax drip down to the bottom of fire and build up? Do you have to scrape it off when the wax hardens?

I just bought one of these for my barn and posted a video also. Thanks for the great information

I just bought this set up, hey thanks now I don't have to read the dumb book

Maybe I missed it, but sometimes on the first screen the black arrow from the solar panels to the battery flashes. Sometimes the battery flashes like it's filling up. Do you know the difference?

This was very helpful. Please give an update on how this product has held up

This video has helped a bit, But I’ve been having issues with mine. And now my display controller isn’t working. I literally just bought the kit over the weekend. Disheartening after all the money I spent at Harbor Freight. And the Harbor Freight people barely know what they’re talking about. Had to call a technician and even then I’m still having issues… The box says it can power an rv or camper, and the Harbor Freight person told me two fully charged batteries and solar the batteries would last four days. I can’t even get mine to stay on more then a few minutes without the Display controller Truly disappointed, I feel scammed (by Harbor Freight), honestly because I spent way more money on this then I should’ve to get what I needed to run everything. Camper is an 30amp, and I have the Jupiter 2000 Inverter. But at least the solar will run for a while during the daytime, for now at least…

Very helpful info. The Shaky cam is difficult to watch though. Thanks for posting.

Good video, good luck with that thing, mine does good to keep a cell phone charged and use one of the lights that came with it once in a while. Have it on a new trolling deep cycle battery. And if you give it a few days between using it, gives plenty of power, but I'm off the grid and don't have days for the junk system to catch it up

Thank you

So cool to see this from the start! You’re really inspiring

This was so helpful and just what I needed. Thank you! Be well.

Good luck to you, I also live in N. Idaho, so I see why you love it here and want to stay! You can do it!👍💪

We are here to support you. Good to hear your positive attitude.

You are very determined & already have a lot of experience from the last few years. It's good timing with the kids now teenagers instead of little ones. They can be a lot of help! It will be fun to see the trailer progress, get color & furnishings. That's exciting about the possible spring! It would be good for videos to show how you dig it out & what you use it for.

I want to see " ALL 4 OF YOUR KIDS WORKING AS HARD AS YOU " .. !!

Sorry for the not-totally-professional editing on this one! It's been a while since I shot and edited a video, and I realized I had some strange auto-focus things going on, and then I was talking to a very dark and dimly lit bathroom wall for way too long, LOL!! I'll get back up to speed on all this, and probably get the teenagers involved - they're like pros at this video editing thing, haha!

Thank you, I just assembled mine today for the 1st time, this helps a lot. Tomorrow I will bring ut out again ant put a load on it to see how it performs.

Ok so I keep getting e11 which means it's a loose connection, (it's not) or the wire is too thin. Any ideas??

Mine is showing an E11 code. I assume it is an error code of some sort. I cannot find any information on that.

I just had a freak out moment when my alarm sounded on my system and displayed an error code! Im a solar newbie. I started googling and found you! You explained this in such an easy and simple way that made sense to me!! I now understand my controller screen (i have this same system)! My error code was a low battery and apparently resolved itself while i was learning from you lol! Thank you SO much!! I am definitely a follower now! 😊

much better than the direction that came with the kit !

Good video and great tutorial! Thank you.

You are the BEST!! My wife was wanting to purchase because it wasn’t putting out enough water!! Thanks!!

Thanks for showing what we all can figure out and not the part we can’t ! So thanks for nuttin!

well u just explained how it works and u was alot of help than the other videos from other people think u so much

Very helpful

Thx for the Video I still Do not like their Charge Controller , some presets say you can adjust yet you find they autoresets to their presets . Like boost nose up to 15v is bogus it resets to original w I can't find a way to get it to save preferences that I need not merely want . I'm Persay Overqualified in Electrical Field of you want to know my skill level yet I am Autistic . Graciously , RM Bowles

I've read the instructions on old boxes of rubbers, they recommend you boil your lids, rings, rubber seals. I think if everything is hot, and the seals are hot and more pliable before you start to process it would make for a better vacuum and seal. I heard someone is coming out with a reusable metal lid, that uses rubber reusable seals. Thanks for posting this video. I've also seen people use the one time metal lids, with a rubber seal, as they had already used the one time use lid and they had no more lids, they just stuck a new rubber seal under the original used seal on the lid and they said it sealed up just fine.

How many watts panels can support the controller? Please!!

Buyer Beware! Do not buy Harvest Guard lids in bulk without trying them first. After following all their instructions I got about 60% failure rate and emailed the company. With every emailed suggestion, I followed the directions very carefully and could not get better than 50%, which I only got once. Unfortunately I had ordered in bulk after watching all the wonderful KZbin videos raving about the reusable lids. By the time my canning season came around I had passed their return/refund deadline.

I have listened to 3 or 4 'instruction' videos and yours is the first on that was simple and understandable. Thank you. Not a bunch of 'cut this wire, add this connector, crip here, yadayada... Just a great explanation. I agree with all the positive comments.

Thank you very much!!.👍🏼♥️