2 жыл бұрын
Пікірлер
@bigbluewolf_ Күн бұрын
Just bought a Delkevic exhaust for my 1992 CBR600F. There are absolutely no instructions included with the exhaust which I found very disappointing. Finding this video has helped but the complete lack of any form of instructions is pretty poor really.
@raphaelcasella5067 Күн бұрын
Is delkevic have compatible exhaust for the 2022 gsxs 950/1000?
@TheUnpluggedTheory Күн бұрын
This exhaust come on my gsx -r 600 that I just bought and it sounds amazing, never heard of the brand neither so I had to look them up, definitely recommend 😊
@TheRidingRoo 4 күн бұрын
Do they come with O2 sensor bungs on both the top and bottom pipes? How do they look like with baffle out?
@punderific444 5 күн бұрын
When you do these tests, do they have the baffle in the mufflers? Or no baffle?
@TheSurreySpeedy 14 күн бұрын
Was this with baffles in or out?
@Dunham13 16 күн бұрын
Going to install some polished stainless oval Delkevic cans on my '97 Trident tomorrow and really appreciate the thorough how-to videos. They were very helpful. And thanks for making cool exhausts for a 27 year-old British bike!
@justinshaw5543 17 күн бұрын
How many decibels is the muffler at idle
@williamlu4394 21 күн бұрын
Hi, I understand that this is the full system, but was this with baffle in or out?
@MJT-DA 27 күн бұрын
Have this exhaust on my Yamaha fz6r and has to be the best sounded exhaust I ever heard for only $600.
@DelkevicExhausts 22 күн бұрын
Glad you like it! Thanks for letting us know :)
@MJT-DA 22 күн бұрын
@@DelkevicExhausts the only question i had is that I get back fires on deceleration. I have block off plates installed and my spark plugs are a nice brown colour so its not running lean. Any suggestions? (They sound cool for the first 20,000kms but my passenger hates it haha).
@fallenwout Ай бұрын
They don't even specify the tiger 900 gt pro on their site.
@DelkevicExhausts 28 күн бұрын
I will pass your enquiry to the development team, I can't find it either, I suspect they are currently out of production.
@thomasgessat2292 Ай бұрын
Hello just want to know if there are compatible with o2 sensor ? Emplacement ? Thanks
@DelkevicExhausts 28 күн бұрын
If there is an O2 sensor ont he standard OE exhaust then ours will be able to have one as well.
@dmitry.demenchuk Ай бұрын
do you make different baffles? for different noise limitations. thanks
@DelkevicExhausts 28 күн бұрын
We only offer what we list on the website
@anthonydavis7971 Ай бұрын
You explain things poorly watch the entire video before you attempt a install you tell us at the end of the video to put the smaller clamps a little bit lower but then don't tell us what to do with the bigger clamps would have been nice to know to put the little clamps a little lower when he was putting them on to begin with
@DelkevicExhausts Ай бұрын
Thanks for the feedback, most people are very happy with the video but you can't please everyone and it's good to know all opinions.
@TheWsbking Ай бұрын
How is the airflow on this comparable to the airflow on a performance 4 into 1 exhaust? E.g. If I get an ECU flash, would it have the same parameters as any other cat delete exhaust?
@DelkevicExhausts Ай бұрын
It's a 1970s technology exhaust developed purely for the looks and sound, not performance. It's based on the actual real original Z1/Z900 exhaust so of ocurse it's not going to match a performance exhaust.
@TheWsbking 28 күн бұрын
@@DelkevicExhausts That makes sense- I'm not worried about performance. Would a dyno tune be necessary to prevent a lean running condition, or is the restriction on this exhaust close enough to stock that I can get away without tuning it? I'm worried about longevity of the valves if I don't get a tune.
@pneumaticman5927 Ай бұрын
Insane! They sound possessed! I’ve gotta have them!
@DelkevicExhausts Ай бұрын
Glad you like'em :)
@PepitoFuego Ай бұрын
Can it fit on a Z900 2021 ? If not, do you made 4 - 4 or 4 - 2 (one muffler on each side) for this bike ? thanks !
@DelkevicExhausts Ай бұрын
As far as I know, it fits all models of Z900RS
@lusoprazer Ай бұрын
Bonjour, dans le cas de la Honda ST1100 Pan European il y a une vis de fixation arrière, je dois fixer le silencieux sur la partie externe de la platine aluminium ou elle doit venir en appui sur la partie interne de l'aluminium ? J'ai remarqué que si on visse le silencieux sur la partie interne de la platine alors le positionnement de la béquille centrale sur la butée sera mailleure. Mon petit problème actuel est que la butée en caoutchouc du silencieux ne vient pas en appui totalement sur la béquille mais seulement sur le bord du caoutchouc. il y aurait une mauvaise orientation de l'emboitement des tubes inox sur la moto dûe à à un défaut de ma moto ou est-ce que c'est une erreur de fabrication ? Merci.
@DelkevicExhausts Ай бұрын
En règle générale, en cas de doute, l'échappement est monté sur la face/surface extérieure. Nous vérifions soigneusement les ajustements lorsque nous développons les échappements et 9 fois sur 10, nous trouvons que c'est dû à un montage incorrect. Cependant, il arrive parfois qu'il y ait une erreur dans la production et si c'est le cas, nous essayons d'aider le client dans la mesure du possible.
@lusoprazer 24 күн бұрын
@@DelkevicExhausts Dans mon cas, la fixation de l'échappement est sur la partie intérieure de l'appui sur la platine. Si la fixation se fait sur la partie extérieure alors les silencieux seront beaucoup trop écartés.
@alexugurie Ай бұрын
Having found no information relating to torque settings, either in the generic guide on delkevic uk website, nor on the specific Suzuki dl650 mkI guide, I torqued up the clamps with an educated guess to 9Nm on both my DL and more recently on my new RE Hunter 350. Only by chance did I just come across this extremely helpful tutorial (but mentioned nowhere in the delived packages) and now find out that 8Nm is the correct torque for the clamps. Well, nothing snapped, so I'll leave both installations as they are. I assume they should be ok. PS, the 350mm oval sounds great on the V-strom and the more open 225mm oval sounds absolutely fantastic and befitting of the plodding long-stroke Hunter single ...and without even being overly loud (both with baffles in for a more refined and warmer sound).
@alexugurie Ай бұрын
Maybe include this video as a tutorial on your main websites?
@DelkevicExhausts Ай бұрын
Glad the video helped, thanks for the feedback :)
@aumkar2 Ай бұрын
OE is the way to go.
@DelkevicExhausts Ай бұрын
Each to their own I guess :)
@KerryCriswell-lj5ir Ай бұрын
With or without DB killer?
@DelkevicExhausts Ай бұрын
Generally everything is tested without a dB killer.
@iamthelaw69 Ай бұрын
Honestly, I wouldn't remove the baffle. Delkevic exhausts are loud enough as-is.
@DelkevicExhausts Ай бұрын
Some people like'em a loud as possible :)
@bobupen6476 2 ай бұрын
What you have here are silencers, not an exhaust. As representatives of Delkevic you really ought to be able to understand the difference.
@alexugurie Ай бұрын
As far as I can see, it's worded for the US market: I read it as a muffler kit for the exhaust system. And I'm not even American 😁
@DelkevicExhausts Ай бұрын
We sell all over the world and in the US, many people are confused by the term silencer and prefer muffler/exhaust. Thank you for confirming that pedantry is thriving out there on KZbin, keeping us all honest.... ;)
@DelkevicExhausts Ай бұрын
Thanks for your comment @alexugurie, you are correct, we sell an awful lot of exhausts/mufflers/silencers in the US.
@MarkJYule 2 ай бұрын
Just put a Stainless X Oval on my '02 CBR and love it!
@DelkevicExhausts Ай бұрын
Glad you like it :)
@AlfField1 2 ай бұрын
Its loud. Very loud. I fitted Highway hawk whisper quiet baffles at the tail end, and a honeycomb baffle mid pipe. It runs fine. It is still 'rorty' but easier to live with.
@DelkevicExhausts Ай бұрын
Good work around, great idea :)
@pa3oT_ 2 ай бұрын
Is this slip on or full exhqust?
@DelkevicExhausts Ай бұрын
It says in the text box in the video it's a full exhaust system
@samsoknights9033 2 ай бұрын
How would I swap this exhaust with my current one if I have a bolt on exhaust?
@DelkevicExhausts Ай бұрын
You'd need a full system :)
@amadd71 2 ай бұрын
Helo. I have a Kawasaki silencer Vulcan S EN650 15-21 Full Exhaust 2-1 Ceramic 550mm Bull Nose Silencer. Model from 2017. Is it possible to use a db-killer to mute the voice?
@DelkevicExhausts Ай бұрын
It already comes with one :)
@james35swag 2 ай бұрын
Last week i have ordered this full exhaust system for my Deauville and hopefully have it within a few days. Cant wait to hear that beautiful sound and feeling the power and torque increase. I have now an AliExpress leovince with (fake) e-mark on it. Fun but lost my low end torque, also a lot of bangs and lost the deep bass sound of the exhaust. I do believe delkevic will bring that back. I have one question though. In the video is said that no feuling modifications are necessary. But if i understand it correctly, it would be a preferable option to do some feuling modifications to get the best power. Can i also assume it can make more power (with a other jetting and full delkevic system ) than on the video above?
@DelkevicExhausts Ай бұрын
Correct, you understand correcctly on all counts.
@user-uy8lc3ts3p 2 ай бұрын
走行音が聞きたいのにBGMがデカすぎる。
@DelkevicExhausts Ай бұрын
しかし、これはフィッティングのビデオであり、製品のビデオではありません。
@factsnchill168 2 ай бұрын
Website states some of the pipes are not road legal???
@DelkevicExhausts Ай бұрын
Yes, in a few markets it is not homologated.
@akanshmirkhur4078 2 ай бұрын
What's the HP gain?
@DelkevicExhausts Ай бұрын
We haven't publiscised that info for this exhaust because we developed this exhaust for its weight saving and looks/sound, not performance.
@haile6471 3 ай бұрын
Do you have something like this for the z650rs ?
@DelkevicExhausts Ай бұрын
Everythign we have, is on our website delkevic.co.uk
@AdventuresAllDay 3 ай бұрын
How do I purchase this up here in Canada?
@DelkevicExhausts Ай бұрын
You buy from the US site :)
@FRANK-cents 3 ай бұрын
I recently purchased a delkelvic exhaust for my w800 which i haven't installed as yet , didnt come with instructions. Has 2 sets of washers, presume the copper 1s go up front on the headers ? But where do the chrome washers go ??
@DelkevicExhausts 3 ай бұрын
If you have twice the number of chrome/ss washers, they might be the ones for the exhaust studs. It's difficult to advise you without seeing any photos, please call your local office to obtain your fitting instructions and discuss it further with them.
@alexandrehenri9508 3 ай бұрын
Is your dual exhaust system compatible with the center stand? Thanks.
@DelkevicExhausts 3 ай бұрын
The centre stand is not fitted in the video and no centre stadn has been fitted to the bikes used in the info on the website so please assume it is not compatible.
@alexandrehenri9508 3 ай бұрын
@@DelkevicExhausts thanks for the input, cheers.
@johnnyweissmuller2338 3 ай бұрын
Hi, i have one of your custom bullnoses on my vulcan. Is there a quieter baffle than the stock one that comes with it?
@DelkevicExhausts 3 ай бұрын
Generally, the baffle that comes with it is the quietest one.
@Uber1Noob 3 ай бұрын
I have full system with Hot bodies short round. Totally had to remap fueling. Plug n play is not in the chat. Sound is Amazing tho!
@DelkevicExhausts 3 ай бұрын
Whehn I tested it in the video, the AFR readings were within an acceptable range but we also recommend further optimasation with a custom fuel map.
@Kurgan28 3 ай бұрын
Just finished fitting the system, wasn't too bad but the access is horrible haha. Only issue I have is The springs on the collector to pipes 1&2 have decent tension when attached, but when I add the springs to pipes 3&4 there is nothing. The springs just rattle around loose and aren't holding anything in place?
@DelkevicExhausts 3 ай бұрын
Hmmm, I'm not sure what to say, sorry. I fitted that system and as you can see, it went together as expected. If you really that it is fitting as it shouldn't, please call your local office to discuss it with someone. :)
@adamdowns3075 3 ай бұрын
Will the full system xsr700 fit the new model as well?
@DelkevicExhausts 3 ай бұрын
When a new model comes out, it often does fit but we like to get hold of a bike to test fit it ourselves, rather than use our customers as guinea-pigs. However, please call your local office to discuss it further, they may be able to offer you something.
@SPROCK3TMONST3R 3 ай бұрын
Will this fit the new generation '23 to '24 model? From what I can tell, they are the same exhaust except for they no longer add the heat shield on the collector of the header. Since this exhaust has the brackets welded on, I would just have to purchase a Triumph heat shield from up to a '22 model to make it the same. I just need to verify that the bracket spaces are the same. Do you know these numbers yet? Thank you in advance!
@DelkevicExhausts 3 ай бұрын
Hi, Triumph are notorious for changing small details that make it very difficult to fit parts designed for older bike son to newer bikes. Please call your local office to discuss whether a test fit on a newer model has been scheduled.
@CorneringBikersPereira 4 ай бұрын
does it fit a 2022 model?
@DelkevicExhausts 3 ай бұрын
We have not determined that yet, sorry.
@TriumphRiderNorthNorthants 4 ай бұрын
would this exhaust fit the street triple s 660 variant?
@DelkevicExhausts 3 ай бұрын
I am pretty sure it would not, sorry.
@dylanstonecipher8419 4 ай бұрын
What performance would I get out of a delkevic exhaust on my 1978 xs750s yamaha?
@yayakyartu2061 3 ай бұрын
😊
@DelkevicExhausts 3 ай бұрын
These classic bike exhausts are designed with a different set of priorities, how they look and sound being a higher priority than how they perform. If you want to see exhausts that are optimised for performance, choose nay of the more modern exhausts that we offer, using 21st century designs and tech.
@kidtyphoon4903 4 ай бұрын
Do you guys have a decat pipe for the GSXR600 K8 ? I have just ordered this exhaust 😍
@DelkevicExhausts 4 ай бұрын
Everything we have or make is shown via the search tool on our website, if it is not showing as available on there, we don't make it.
@user-ii1gc1zr8z 4 ай бұрын
Do you get the power gains without air filter changes
@DelkevicExhausts 4 ай бұрын
Hi, yes all the testing is done with stock/OE air filters
@FRANK-cents 4 ай бұрын
I recently purchased a carbon muffler system that came with the polymer strap and the rubber insert for the stainless strap , does it matter which strap is used with the carbon muffler ? as I prefer the stainless on carbon look .
@DelkevicExhausts 4 ай бұрын
Hi, no it is up to you which one you fit, as long as the starp is fairly tight and secure without being excessively tight then either is fine.
@cedced3373 4 ай бұрын
Bonjour, C'est compatible pour la street triple de 2023 avec le collecteur delkevic ce silencieux svp ?
@DelkevicExhausts 4 ай бұрын
Bonjour, veuillez contacter votre bureau local à Delkevic.fr pour en discuter plus en détail. Nos tuyaux de descente sont compatibles jusqu’en 2020, je ne sais pas si Triumph a changé le montage depuis.
@stevendufour1117 11 күн бұрын
Tu a peut être trouver ta réponse. Mais il sont compatible. Depuis 2018 ça n’a pas changer au niveau du collecteur
@lusoprazer 4 ай бұрын
Bonjour, vous pouvez me dire si la référence gravée sur la partie chromée en sortie du silencieux (n° Ref BSAU 193T3 - PR1855) pour Honda ST1100 Pan European correspond bien au modèle Delkevic KIT0410 ou au modèleDelkevic KIT0610 ? Merci.
@DelkevicExhausts 4 ай бұрын
Bonjour, il s’agit du numéro de pièce du silencieux lui-même, qui peut faire partie de l’un ou l’autre kit. :)
@pmason4998 4 ай бұрын
Why not send the mount with the insert in?
@DelkevicExhausts 4 ай бұрын
I htink it was just determiend to be the easiset most convenient compromise regarding production, shipping and fitment. Most people don't have any issues with it.
@pmason4998 4 ай бұрын
@@DelkevicExhausts interesting. I'm sure it's convenient for you guys, but there's plenty of people that struggle. Add that extra 1percent & do it for the customer, so that we don't have to.