I have 4 of the 40$ icon lights, and they are amazing. When I bought the 60$, I was very disappointed with it. It sits and collects dust now.
@chiefordnance4 сағат бұрын
That is a ball peen hammer not a dead blow hammer duh 😂
@davidgriffin146 сағат бұрын
The Icon lights just came out with new colors.
@nyc845211 сағат бұрын
Completely agree. I bought it as soon as it came out and I wish I didn't bother. It's big, clunky and feels cheap. By far the best light I've bought (and my go-to) is the Streamlight Stinger with the charging mount. Absolutely worth the $25 extra - the Icon isn't even cheap.
@bobit874211 сағат бұрын
is that 3/8 or 1/2? which one should i choose? torn between the two
@AlejandroDiaz-ot7jn13 сағат бұрын
Nice
@johnnyramirez908214 сағат бұрын
Trash, I'll stay with the original, Snap on
@michaelstjohn608614 сағат бұрын
I wanted an Icon for my service truck, used my Snappy big one to be sure, you are right it is to large for close in work, I strangely I had forgotten. The big one is great for big trucks and equipment though.
@johndunnavant122215 сағат бұрын
Yep that’s exactly the way that I did it , I started working 3 days a week while I was working at the Chevrolet dealer , then I already had clients already and then word of mouth started to spread. Then my wife and I built a 60 x 80 steel building. Over time we have insulated light air ect , great content my friend
@johndunnavant122215 сағат бұрын
I have that same big icon light and I agree with you it’s kinda expensive for what it is and having to cycle through is crazy
@killroy360715 сағат бұрын
I have the snap on version of that big one and its the same way but doesnt really bother me im more focused on working 😂
@craigdave326615 сағат бұрын
Us general is like a old truck and snap on is like a Lamborghini of tool box
@nauidiver22717 сағат бұрын
Copied dewalt but now I can rip them off the wall considering I have all red tools
@nateh163619 сағат бұрын
You are not very bright
@TerronDHardawayКүн бұрын
Looks gently used
@Sup_EvoxКүн бұрын
My 3/8 does just fine and I use 4.0 or 3.0
@Col.Big123Күн бұрын
I personally never break fasteners with Electric ratchets... unless i know it's well well below the recommended.
@galacticdaddy96Күн бұрын
i have a bunch of stuff that is matco, i go by the dealer not the tool, warranty replacment in a timely fashion is all that matters imo. nice haul!
@3seriesgarageКүн бұрын
Haven't seen 1 of your videos in a minute brother! Idk if it's my or what! But good lookin! I have yet to get myself 1 of them but they seem handy at the right times!
@EnrightautoКүн бұрын
Algo sucks sometimes it’s annoying. 💪💪 thanks for watching and commenting
@3seriesgarage23 сағат бұрын
@Enrightauto thank you man!
@chiefordnanceКүн бұрын
Don't forget 20% off coupon 😂
@OSCARthe420GROUCHКүн бұрын
I would have expected alot more out of a 600 impact gun
@EnrightautoКүн бұрын
It’s a honda crank pulley. Milwaukee stubby wouldn’t get it either
@SwashBuckler311Күн бұрын
Harbor Freight is The BiZz Quit hating
@nordicpride9708Күн бұрын
Why are you using those trash hobo freight swivel impacts? The torque test channel showed how easily they break and don’t deliver as much torque. Poor choice
@EnrightautoКүн бұрын
To test them out and review them 🙄
@Yatess95Күн бұрын
Why were you even using a UJ?
@EnrightautoКүн бұрын
Because it’s the point of seeing what the impact is capable of.
@Yatess95Күн бұрын
@ Not needed and you’re reducing torque so it’s not really a good test😂😂😂
@EnrightautoКүн бұрын
@ 🤡🤡🤡
@Yatess95Күн бұрын
@@Enrightauto deleting my comments😂😂Your the clown bud!👌🏻
@EnrightautoКүн бұрын
@ just shows how little you know. Stick to rage baiting
@kirtturner1390Күн бұрын
The difference between a parts changer and a mechanic goes all the way back to your childhood working on your bicycle. You need 2 of each wrench size. I've been noticing a lot of parts changers with there jewelry boxes on display. They are very beautiful 😍
@EnrightautoКүн бұрын
Literally makes zero sense. Are you jealous or just a rage baiter?
@kirtturner1390Күн бұрын
@Enrightauto lol, does your jewelry box have two sets of the same wrench sets. Yes or no
@EnrightautoКүн бұрын
@ ahh so it is jealousy. Makes sense. Also are you blind? There’s not one single wrench the same which shows your ignorance you can’t even tell the difference between wrenches
@Rusty_DavesКүн бұрын
What do you use to organize that drawer. I see those extension holders. And I like it
@EnrightautoКүн бұрын
Sjw organizers, qrt organizers or tool craft organizers
@Rusty_DavesКүн бұрын
@ thanks
@lex87372 күн бұрын
snap on fan boys are probably gonna say the battery isnt fully charge thats why you couldnt get the bolt off
@IvanRossS2 күн бұрын
All this hate comments lol. All this couch experts.... he obviously know what he's doing, he obviously knows this tool is not meant to use this way but if it works for him let him have it. Lol. When this tool will break on him, only he is going to be dealing with it, not you !
@petemcconnell6142 күн бұрын
Try that in the Midwest
@taylorbannister94942 күн бұрын
Koken actually was the first to make an patent the wobble extensions
@IHVA-ir9gp2 күн бұрын
I bought a robust steel recently for my farm shop and its loads better than my existing stool. The five large casters really keep the stool upright when rolling around the floor and I haven't had any issues with debris (e.g.zip ties, residual oil dry, welding wire scraps) causing rolling problems. My previous stool only had 4 casters and was a bear to roll around when stuff was on the floor (even residual oil dry would cause issues). Bought it on special so it was better price than normal pricing. Good well made stool that should last.
@Mattmazz772 күн бұрын
It's awesome. But 1 of the other channels already debunked the more torque part. I would definitely buy 1 but like he says no reason to trade up if you already have the old 1.
@jmc69402 күн бұрын
Using the time scale you can see which sensor is closest to the noise as well.
@grizzrider092 күн бұрын
He's got a snap on tool box that should tell you enough about him
@anthonyzimmerle36492 күн бұрын
Good to know Tks
@brandonlove34442 күн бұрын
I wonder if the original long reach m12 fuel ratchet would do it. I have that one and feel like it would. I take it this one is the newer high speed model.
@robertlawson11842 күн бұрын
Sunex, tekton, sk, gw, and bad company is plenty along with otc specials.
@Sir-Kay3 күн бұрын
How strong is the snap on? model and specs please.
@landonlehman54973 күн бұрын
Damn. Snap On has all your money!
@Enrightauto2 күн бұрын
Nope
@landonlehman54973 күн бұрын
Just make sure your parking brake isn't set, and sometimes you need to back the adjustment off too.
@stevest13003 күн бұрын
Brakes 101
@johndunnavant12223 күн бұрын
I use these as well and haven’t broke one yet and put them through hell
@galacticdaddy963 күн бұрын
my 1/2 JUST arrived today. i already blew up a GW 15mm x drive swivel. an before yall knock em they have served me well over the last 13 years lol this thing might finally push me to get the snap on ones in 1/2. absolutely love it!
@aidans40822 күн бұрын
Put some EP2 grease or any wheel bearing grease on your swivels! Bought my Matco swivel set second hand from a retiring technician, they're like 14 years old and going strong. The Matco ones are just rebranded GW. The first thing the guy told me when I bought them was "make sure you grease them here and there or else they'll explode", and he was right. I've had them for 3-4 years now and haven't broken one yet. They get abused regularly on my 1/2" Thor G2 and M12 3/8" stubby. Just like ball joint presses, anchor pin presses, fresh bearing grease does wonders on metal to metal
@galacticdaddy962 күн бұрын
@aidans4082 ill definitely give that a go on Tuesday when the new one comes through lol our snap on rep does GW too
@samlind86763 күн бұрын
Pull ups??
@rightwingsafetysquad98723 күн бұрын
Exhibits the big problem that motivated me to stop buying M12 tools and switch to DeWalt Atomic. The batteries are basically dead when they still claim to have half a charge left. That 5Ah battery is effectively only 3Ah.
@ianlld3 күн бұрын
Did you do the pull ups or did Ron? 😂
@RT-wq8bd3 күн бұрын
Why another gun? Why more shoes?
@johndunnavant12224 күн бұрын
I too am a 1 man shop owner great points for sure
@Enrightauto3 күн бұрын
Thanks for watching. Hope your journey as a shop owner is going well.
@johndunnavant12223 күн бұрын
@ yes it is , can be a challenge for sure I definitely understand the points you make. I too had to learn to balance time. I also do things very similar to you. Depending on the repairs I can normally get 3 maybe four in a day as you know parts etc can dictate that for sure. Thank you for the reply have a good day my friend mine is about to start lol
@BiornVS4 күн бұрын
Is it 3/8 impact wrench?
@Enrightauto3 күн бұрын
Yes
@CJBMAGGOT944 күн бұрын
If you're stripping the gears maybe you should stop putting a pipe on the end of it. Get a normal ratchet or breaker bar.