I originally bought a FS 5”. And now my Walther PDP collection has expanded to a 3.5F, 4.6 Pro compact, 5” poly match and x2 4.5 FS ACRO professionals! These guns are slept on big time! My department is currently in the process of switching from 45 to 9 mm and once it does, I’m gonna run these guns so hard. The 4.5 ARCO is my EDC. Everybody owes it to themselves to try these guns.!
@2asyndicate6513 күн бұрын
Absolutely, I’ve had zero issues ever with my PDP!
@TheBlackconsigliere4 күн бұрын
Very informative. Thanks. Does the entire market gear towards the tact lights now?
@2asyndicate6514 күн бұрын
Well it does a couple of things, one in dark conditions you can light up the night without taking your hands off the firearm, and the extra weight keeps the barrel down in recoil.
@2ANLA11 күн бұрын
DOPE!!!!
@FPS_Bang12 күн бұрын
Thanks, what grip tape are you using
@2asyndicate65111 күн бұрын
Handle it grips
@zayy509813 күн бұрын
Great review good to hear the truth on tour reviews
@2ANLA14 күн бұрын
Great video. Just fyi. A few times when I've ported striker fired guns I needed to change the spring weight to correct feeding issues.
@2asyndicate65113 күн бұрын
You would figure, ZAFFIRI sends the complete upper with spring, that they would have that figured out with what they charge for it 🤦🏾 😂
@@2asyndicate651 I'm getting the combat in two weeks from now. Already have the PDP. Good taste in firearms.
@2asyndicate65115 күн бұрын
@@DwaneRichardsonSr. a lot of people sleep on the STR 9 Combat
@GotGammage15 күн бұрын
I recall seeing a box when my brightness was up to max
@2asyndicate65115 күн бұрын
@@GotGammage same I want to see what Cyelee has to say about that
@GotGammage15 күн бұрын
👏🏾👏🏾👏🏾👏🏾 Yesssuhhhhh!!! Great stuff!
@justinl845517 күн бұрын
Good video
@2asyndicate65117 күн бұрын
@@justinl8455 thank you
@dasniper28218 күн бұрын
Nice! Does the sro fit flush on a hypercomp, or does it require a plate.
@2asyndicate65117 күн бұрын
@@dasniper282 it fits flush, directly to the slide.
@MontanaTonyy18 күн бұрын
You’re definitely a salesman at this point 😂
@2asyndicate65111 күн бұрын
🤣😂🤣😂
@rapturog239619 күн бұрын
Hows the mag release holding up? I wanna get one but theres no follow up videos
@2asyndicate65119 күн бұрын
The Mag release was not that good I took it off and just sent it in to get done at Atlas gun works
@lstx383922 күн бұрын
The best video about the prodigy I have seen.
@scottsozmtns753424 күн бұрын
Thanks for the video. I’m not a new pew-pew owner by any means but just picked up a Stoeger STR-9 & it’s NOT cut for optics but thought about doing what you’ve done. Thanks!
@oceaser697725 күн бұрын
Gotta be honest- that prodigy looks nice I had one and it was crap but since they may have tightened up I may get another
@mikey1000tx26 күн бұрын
Bandera Rd CC?
@brianrussi432827 күн бұрын
I found a carry magwell for the prodigy but it’s just over 100$
@2asyndicate65126 күн бұрын
@@brianrussi4328 that would be great to have who sells it?
@brianrussi432826 күн бұрын
@@2asyndicate651 RSTR Manufacturing
@brianrussi432820 күн бұрын
@@2asyndicate651RSTR I don’t think it’s worth it honestly I watched another KZbin video where he said it does not come with the pin and for the money that’s a hard pass it’s not worth it
@jonspencer700429 күн бұрын
where's the follow up?
@2asyndicate65129 күн бұрын
@@jonspencer7004 I will get that done asap, it’s been a much better firearm with that spring for sure!
@CitizenCarrierАй бұрын
Excellent review. My Floyds mag well and base plates are being delivered today and I can’t wait to install them! I love my Walther full-size PDP. I have two of them, both 5 inch barrels. One for iron sights and one for optics. My optics one is getting the mag well and base plates. I’m also getting the standard base plates because I conceal carry mine every day and I think the +4 and +6 would make it tough to conceal. Love your channel. Just subbed.
@2asyndicate651Ай бұрын
Thank you for the support, my PDP is my favorite as well, I think my next move is to get a compensator for it and see how it runs.
@TheDiViSion007Ай бұрын
Dang look like flat shooting with the jetram❤
@2asyndicate651Ай бұрын
Very flat love it
@Three60CrusaderАй бұрын
I’m guessing you have to use that plate that comes with the Steiner?
@2asyndicate651Ай бұрын
Correct
@TNTacticalАй бұрын
I got mine in. Looking forward to trying it out
@2asyndicate651Ай бұрын
@@TNTactical I feel sorry for it, if your going to try and break it 😂
@TNTacticalАй бұрын
@@2asyndicate651 lol nah, this came out of my own pocket. I'm too poor to do that
@sdmarine8921Ай бұрын
Another great review. 👍🏽
@1stShotTacticalАй бұрын
Great video! I need a setup like this now!!🤘🤘
@2asyndicate651Ай бұрын
@@1stShotTactical that’s all I got, you’re the king of 500 rounds!
@ChrisFromThe740Ай бұрын
👍👍
@2ANLAАй бұрын
Fam!!!!!
@bcpowrhseАй бұрын
Great video...I subbed. Can you tell me what screws you used for your prodigy to mount the Cyelee? I know it's a 6x48, but what length did you use? Thanks for the help!
@2asyndicate651Ай бұрын
@@bcpowrhse I had to file them down a bit
@bcpowrhseАй бұрын
@@2asyndicate651 Ok. Thx!!
@tibora13Ай бұрын
6:02 That's uncomfortable. Glock 23 3rd Gen .40cal owner🔫🤠 #4-UP
@spencerwarren9219Ай бұрын
I have the holosn eps carry msr green version on my prod 4.25. Its the best sight out there. Either fullsize or carry. I really suggest getting the msr version with the solar backup. The msr is great for edc and then for compition also with the 2moa dot only. I edc with the 32 moa circle only and then use the dot for persion shooting. I see green alot better then red and doesn't cost about 20 bucks more for green. Its isn't a cheap sight but I think the best next to trig rmr cc. I chose the eps due to fully inclosed and side battery door over the trig rmr cc.if your prod is compiton only go with the full-size eps.
@2asyndicate651Ай бұрын
I was demoing this read dot I have the Holosun on the one I edc.
@sdmarine89212 ай бұрын
Great review🔥🔥🔥.
@islandprepperone2 ай бұрын
Zev Techs are great!
@MrEd-dc6mh2 ай бұрын
Thanks for your review. I haven't held one yet but now I want to. God Bless 🤠
@revvaddictz2 ай бұрын
I love this gun since i first saw my first video on it.. in person im a lil turned off by the boxiness.. Kinda more into the rounded guns!! But still may buy it bc WHY NOT LOL
@j.a.mcarryconcealedgunsafe43232 ай бұрын
Good review i feel the same way
@PattiCarriveau-ib5zc2 ай бұрын
No plate needed for proper set up
@2asyndicate6512 ай бұрын
Depending on the firearm you have, it may not have the plate mine all have a plate. it's the doctor cut for this particular Cyelee modal they also have it with the RMR cut as well.
@CharliePR932 ай бұрын
15lb?
@2asyndicate6512 ай бұрын
Yes! But because of the triple spring setup it fell a lot lighter.
@CharliePR932 ай бұрын
@@2asyndicate651 i ordered one from Sprinco, i might try dpm on another firearm and compare both.
@The-Sportsman692 ай бұрын
Thanks for your video 👍
@JCarruth1302 ай бұрын
Did you have to remove the optic before sending it? I just put mine on and dont want to screw with it again if i do need to send mine in
@2asyndicate6512 ай бұрын
I just took my optic off! Didn’t want to take any chances
@themusictheologist7752 ай бұрын
Was this the rubber grip or sandpaper
@2asyndicate6512 ай бұрын
Sand paper I like it but it’s really, gritty
@SickDm52 ай бұрын
The dawson website says it doesn't work with the facory mags and recommends the dawson base pads. Any info.
@2asyndicate6512 ай бұрын
I worked perfectly fine with my mags.
@Rocketman9mm2 ай бұрын
when I get one it's gonna look pretty much like yours but I think i'm gonna go with the holosun 507 comp for the bigger window.
@x.adam12 ай бұрын
My safety broke on round 3. Sent it back. They changed it out. I switched out the internals because I wanted to. My safety was changed out to an Atlas one because I wanted it. Runs like a champ. Looks amazing too.
@2asyndicate6512 ай бұрын
A lot of people are getting Atlas updates now.
@sdmarine89212 ай бұрын
Congrats on Syndicate Training Academy!!!!
@2asyndicate6512 ай бұрын
Thank you sir!
@mr.channel64673 ай бұрын
Did they have to remove the iron sights?
@2asyndicate6513 ай бұрын
Yes I could have had them move the rear sites to the front of the optic