I put the keyboard in, but now I need to reassemble the Macbook Pro. But I don’t know how to do it. There’s so many small parts and it’s hard to keep track of everything. This video is not enough.
@frosty90852 күн бұрын
I like this video. Fast and direct to the point. Good job.
@tho1763 күн бұрын
Thanks for video works very well here
@quiteplease55874 күн бұрын
Thank you very much. Very simple and clear for all cases. Good luck to you in all your projects!
@GILDARTUNOKOVOZKY4 күн бұрын
Why need replacement de power supply (porque se necesita sustituir la fuente depoder en la imac?)
@mikeymikeday895 күн бұрын
Waste of “uckin” time
@Animalskh645 күн бұрын
Very good video
@alfabravofilm5 күн бұрын
🙏🙏🙏🙏🙏🤝
@AnslimMarcano6 күн бұрын
Why put a desktop in the thumbnail, ass.
@zamilhafizin6958 күн бұрын
thanks
@wagnerrodriguez171610 күн бұрын
Súper video! Funciona a la perfección y muy bien explica. Infinitas gracias
@meetthewordofgrace50811 күн бұрын
Thank you very much. I applied what you said and it worked
@jackbauer869913 күн бұрын
Did not work
@KevinTaddeo16 күн бұрын
GOOD MAN. This totally worked.
@Mix_valiant_channel17 күн бұрын
If you are listen my words to please make a new video my problem is that this os X mountain lion is download in pen drive then how we are transfer os X lion in hard drive/hard disk because when we are remove pen drive laptop is not open it means it show the question mark then my question is that how we transfer os X mountain lion in agian in hard disk or hard drive
@hopal661219 күн бұрын
Hi, Can a 2014 model 27 inch computer motherboard be installed in a 2015 model 27 inch imac computer? or 2017 model motherboard to 2015?
@Dumbdogtech21 күн бұрын
👍👍👍👍👍👍👍👍👍thxxxxxxxxxxxxxxxxxxxxxx
@bp808521 күн бұрын
Notice he didn’t film plugging it in which takes 2 hours .While this may seem faster the vid is misleading it’s essentially impossible to plug the bigger of the 2 small ends in without damaging or putting too much pressure on the mother board otherwise you could try using pliers. Which could lead to slips and damage. You’re gonna be better off removing all of tue screw including the 4 silver screws holding the mobo in the center. Then you can safely lift it up enough to get your finger under to press it in. It seems silly to claim it takes 2 hours to do this. The real problem of damage is going to happen during screen removal. It will never adhere the same and you could crack it. The rest is just screws and memorization
@DmitryAladin22 күн бұрын
Ох уж этот горе-мастер! Кто же так дисплей поддевает? Выкинь свой набор китайского происхождения 😂 я думал щас все шлейфы порвешь этой лопаткой😂
@elisehounslow657223 күн бұрын
You need some special screwdriver for the top left one I think?
@HOANGUYEN-uf4vm23 күн бұрын
Do not need to heat up the phone
@HOANGUYEN-uf4vm23 күн бұрын
Actually we do not need to disconnect the screen changing the battery with care
@hippo-potamus25 күн бұрын
Mine is just hard to click down I have to press very hard and its annoying since I do a lot of work with click drag maneuvers. Is the solution just a whole replacement or is there a way to "clean under the pad itself? Thanks
@d.chrisestey928725 күн бұрын
You cruised through the “lever” on the disconnection for the audio board in like one second. I don’t even know what the lever is or how to disconnect it and if I try to do it without more specific instructions, I’m gonna break the freaking thing so thanks for the detailed instructions. I now need to look on Google or some other place to figure out what the lever is and how I disconnect it without breaking it.
@WasteNoMinutes25 күн бұрын
3:22 - 3:24 is what matters. Wow the avoiding the point!
@DrDaab26 күн бұрын
Excellent Video. Nice and slow with lots of useful commentary. I would, as pointed out by another video, connect the battery cable before positioning the battery because there is a bit of slack and once pressed into place with glue strips it is very difficult (or impossible) to move. Also, there is no resealing the top to make it waterproof - fine with me because I don't plan to go swimming with my phone. Great VIDEO Thanks !
@benjaminhornung395526 күн бұрын
Awesome mate, thanks for the pro tip!@!
@xyzxyz457527 күн бұрын
isopropanol alcohol would be another option to remove adheresive!
@yarzartun265227 күн бұрын
Will I get my old data file back or will they be deleted?
@kappeyne28 күн бұрын
An excellent video with concise instructions. Well done and thank you!
@nocekisabelle463429 күн бұрын
Thanks 😊
@ThemugitАй бұрын
Thanks for the help. Keep posting
@joeyp-ni8hzАй бұрын
CAN U HELP ME MY IPHONE 8 SCREW JUST KEEPS SPINNING BUT WONT COME OUT ON MY IPHONE 11 IT DOES COME OUT WHAT CAN I DO SO THE SCREWS COME OUT
@azbest4375Ай бұрын
CHOROSZCZ BABCIA PEGAZA BOTOWAŁA
@cmaranatha9890Ай бұрын
I don't know if you'll see this comment since this video is from 8 years ago. At 10:10 (disconnecting the left speaker), I mistakenly took out the speaker plus the tiny "box" it is in; the the tiny "box" was pulled off the board. Did I ruin it? Does the tiny box need to be soldered back in a certain spot in order for the speaker to work? If it's unrepairable, I'll just use the right speaker.
@gaza2322Ай бұрын
Had to install a new screen because I cracked it whilst putting in a new battery. The kit i used didn't come with a metal prying tool or anyway to heat the glue around the screen! Anyway, managed to follow this excellent tutorial and my phone is back to 100% again. Be warned that some of the steps can be quite tricky and re-inserting the plugs can also be tricky!
@ihaveasandwichinmypocketАй бұрын
This is a lie do not do this like this asshoke
@AliciaZiffАй бұрын
After removing the 6 T5 screws from the logic board, the board still seems to be attached at the right end of the thin black bar, that sits to the right, just above where the fan was. I can't see any visible screws there ~ but am nervous to try and force it loose. Any suggestions?
@AliciaZiffАй бұрын
Hi ~ everything was going okay until: after removing the 6 T5 screws from the logic board, the board still seems to be attached at the right end of the thin black bar on the upper right, just above where the fan was. I can't see any visible screws there ~ but am nervous to try and force it loose. Any suggestions?
@NgaLeThi-oe7djАй бұрын
I need you to perform on the mac not only talking :))
@sefrainmenespacheco7562Ай бұрын
Because after the replacement I no longer have the wifi option):
@travelkidunyaАй бұрын
Rubbish didn’t show how to change display
@BabypharmacyАй бұрын
Just a small note when closing back do not put the tall screws first it will be hard . Try to put the small 8 ones first then the tall ones will fit easily
@paultinajero9733Ай бұрын
Is it possible to change only the glass on this model?
@kappgodАй бұрын
My 2010 iMac mic port is at the bottom of the motherboard by the fan I’m confused lol
@kyle51895Ай бұрын
I wish I had bought new speakers when I did the WiFi card upgrade lol. Did basically the same repair twice, because right after I did that, the speakers went out. Glad I changed them, they had 13 years of junk (not mine either, I just got the laptop) built up in them and the left speaker was shredded lol
@bargad1671Ай бұрын
YA BEN ZONA KOS DODA SHELAH SHABRTA LI ET ATLPHONE
@bargad1671Ай бұрын
DONT WORK YOU BREAK MY PHONE BUY ME NEW ONE ֱֱ!!!!!!!!!!!!
@David-rj7krАй бұрын
Please you forgot to unclip the battery 🤔 is that necessary