It helped me. Thx

So why does my lights come on with a switch and not my engine with the key. I have bought a new battery clean the terminals I cross with the carburetor and to get it started. It starts but not with key could this be my ground wire I need to trace or where should I start.

Looks like a March pulley. Nice👏🏼

I have a Kawasaki mule 1995 I have to jump and it starts. When I turn the key on the lights come on but can’t start it.

Thanks guys, got my 77 Monte trim off both front and back to have glass resealed. I appreciate you passing on the knowledge.

I have a 2003 F350 7.3 basic maintenance has been kept up with on it. I drove it to school one weekend and on the way it was fine. However on the way back, I was about 10 miles from home and I sped up to pass a car and my truck suddenly acted like it was misfiring. I set my cruise control and it did fine but lost power and died on me when I came to a four way stop. I changed the oil (added arch oil too) and I cleaned out the fuel filter housing and replaced the filter. Truck still acts like it’s missing when I accelerate hard though. Any suggestions or advice would be great!

Thanks fellas! We recognized the fluid leaking out the back but was unsure of the part it was leaking from! Great job on the video and explaining what to do!

Me and uncle are about to change from a Vtype to flat.. Flat type was a bit expensive so we took the vtype

Thanks

Je cherche cet sofely ou je le trouve

Does it hurt

Any way you could tell me why my screen is just black?

Any idea why I have a black screen!? And doesn’t run?

I just flipped my freaking four wheeler and the handles are bent. 😅

Thanks fellas. My 67s trim is so tight, its like its glued on👊

Manual says 1,6-2,1 in 🤔

Should I add a temp guage to mule 2510 or do they generally run fine with just a dummy light?

Ethanol in the fuel kills the petcock over time.

I have a 2012 Kawasaki mule 610 XC I have spark gas straight to the carburetor fuel pumps working brand new can’t get it to run🤷🏽‍♂️

Why you dont clean the air filter? Airfilter oil

Hi make sure the spark from the points are a bright white and not yellow.

Hi you've put the fuel filter in between the wrong fuel line, should be from fuel tank to fuel pump.

What are the covers called

Yeah, great Bass. Nice fishing spot, too.

Do you apply the sealant over paint? or, do you have to get it to bare metal. Seems to me that the sealant would only stick as good as the paint does if you put it over paint.

'I'm going to hold one side of this...'

Making work easy

I can't tell you how mad I am right now. A guy I worked with said just pull the foot off and slip it over the bottom that's how you do it. It took me 5 hours and all kinds of gadgets that I had to make to get that freaking thing over the bottom. And just out of curiosity I looked up your video . I'm going to go drink a few beers and bang the wife, and maybe yell at the kids

This video is great. Very thorough and informative. Thank you!

4 cylinder?????

Hello! Whats the cost for bellow replacement?

Hi pkease does this help with a little boy who has like 10 rough warts in each hand and now started to have warts on lips 😢😢😢😢😢 i need your help please

Hey man, thanks for the vid, my impala is a column shifter so Im sure its a little different, however it does fill in the gaps. It was hard to hear what you were saying with the car on, into muysic and chickens. however Hopefully I can get something from you telling us about the slack!

1302 is 1971 and 1972 so flat windshield, 1303 1973 on, curved windshield.

Simple and easy, but its nice to see someone do it just for confirmation if you've never done it before.

I got an old 50 hp Mercury thats leaking water from top of the pick up tube. Pick up tube is snug and will not come out. Anybody know how to fix that.? Do you have to removes upper housing to get to it?

I have a 99 c6500 with 454. Do you know if it has a inline fuel filter or in the tank sock like your truck has/had?

Thanks for the video guys! huge help. I have the same Mercury 35hp so this was perfect.

I have an 013 610c mule no E add table acte like out of fuel but full, changed all filter pump tice and carb no buano, any idea?

what if my car doesn’t have the fender covers like that? they’re cut off to fit bigger rims

I just had one break on me today, the bellow was cracked and leaking oil and the whole top half can rotate separately from the bottom half. I haven’t opened it up yet but does anyone know what happened?

That is maybe 2 lbs ...you suck

Solid core wire...try pushing it instead of pulling it

Get rid of that awful rave music in the background lol

Great video I will try that on my mule it will not fill the fuel filter and dies!

Should you put it in reverse or forward or leave it in neutral before removing the lower unit for alignment when reassembling?

How do you adjust the compression release ?

my water tube come out with my lower unit i have turned the tube in all directions and it will not line up any help would be grateful

nice bass

The lift bar goes over the top middle of the cover. You flip one side over it, then use the lift bar to raise the rest off the hot tub. I would imagine that’s why your cover is absorbing water as it drags across the water level. At least the bullfrog spa I had operated the way I explained. Never had any issues