Concerning the oil filter, Are you supposed to pour oil into the new oil filter and apply an oil film to the filter gasket and then install the filter.
@dans364Күн бұрын
No comms...
@chinnaswamykasinathan4574 күн бұрын
Can you post link for control arm kit from fcpeuro please
@chinnaswamykasinathan4574 күн бұрын
How did you put the polyurethane bushings from Ecs tuning I On to the bushing kit from partskeek. That part not understanding please
@TheGra3254 күн бұрын
Total scam! I payed for the full package to use on my fleet at work, doesn’t do anything promised apart from very basic functions anything could do, support useless and no refund!!! Don’t fall for it folks.
@TheGra3254 күн бұрын
Also the £35 extra mentioned to decode the codes is actually just linked to a Google search you could do yourself for free.
@chezfeliz5 күн бұрын
dude, I just got my first bike. Same year, make, and model as yours. One of the things I really wanted to do was service it myself, and your video is the first one where I watched it and was like, "oh I can definitely do that myself." Thanks for the vid dude!
@Aktivebuilt5 күн бұрын
I changed my upstream and downstream sensors even deleteing the code and after two weeks the engine light came back to p0139. Any tips on what should be done ?
@erskaina98679 күн бұрын
what is the red milwaukee tool called? what are the attachments called so i can fit torx and the 10mm??
@ManujaDeSilva-cf3mx12 күн бұрын
Can you provide a link to the tool(s) you used to remove bank 2 post cat o2 sensor ? They are impossible to remove without the right tool.
@CaptainARRR12 күн бұрын
Does this work on an E46?
@HansGarage10 күн бұрын
Yes, I own an e46 and this video on my e46
@robertlyons780715 күн бұрын
Can I use those same bushings on a E46 automatic, thank you.
@HansGarage14 күн бұрын
You sure can!
@tompuddy122515 күн бұрын
Hi what size are the bolts that go through the doughnut
@FreudeF1016 күн бұрын
Nice job !
@LionGaming-pk9yt19 күн бұрын
i need a cheap m3 so i can make the bmw from nfsmw
@Slashburn6920 күн бұрын
15 year auto tech here. When I heard wait an hour then torque after rtv part install, I cringed. With rtv your suppose to apply, install and torque within 15 minutes, then wait four hours for rtv to cure before adding oil. Or at least that's what every vehicle service information I've read says how to install RTVed parts. Other than that, very informative video and thank you for sharing😊.
@HansGarage20 күн бұрын
@@Slashburn69 www.permatex.com/the-ten-most-common-gasketing-mistakes/ Typically, RTVs require a minimum of two hours to set up and 24-hours to achieve the full cure that’s needed before adding fluids or returning the vehicle to service. Straight from the source!
@StudioSasha21 күн бұрын
i have BMW 528i e60 2009 - How to disable Gong from Speakers Complete ?
@zhandcl23 күн бұрын
감사합니다💯
@zhandcl23 күн бұрын
안녕하세요 한선생님! 반가운 얼굴이 있어 이 영상에 또 와서 인사드립니다 ^^ Oxygen Sensor라고도 하고 Lambda Sensor라고도 하는 작업을 잘 보았습니다. 그런데 YT영상을 검색해 보니, 보통은 upstream sensor만 교체하는 영상이 많은데, downstream sensor는 교체를 잘 안하나요? 저는 자동차 전문가도 아니고 토종 한국인이라 영어 혹은 표현에 어색함이 있어도 양해 부탁드리겠습니다 ^^
@zhandcl23 күн бұрын
앗 이 영상을 또 참고해보겠습니다 kzbin.info/www/bejne/d56ogaeHbrZ6etksi=w2Ezc-nirzFaes4q
@zhandcl23 күн бұрын
downstream sensor는 다소 난이도가 있어보이네요 ㅎㅎ 상대적으로 upstream sensor DIY가 접근성이 좋아보입니다.
@Rumberito28 күн бұрын
Thanks for this!
@Fabianedwd28 күн бұрын
I know this video is 7 years old now, but how do you install the new cable through the drum? I’ve only seen how to take it out - please help!
@HansGarage28 күн бұрын
They go in same way they come out. Very easy install once the old cables are out
@Fabianedwd28 күн бұрын
@@HansGarage Thank you for replying man, it’s much appreciated! So the way you hammer’d the cable out is the same way I’d hammer the cable into the hub?
@HansGarage28 күн бұрын
@Fabianedwd no need to hammer in it will fit snug after cleaning out the hole
@Fabianedwd28 күн бұрын
@@HansGarage Copy that! Thank you man!
@edmund176329 күн бұрын
Excellent video. Clear and concise. Well edited.
@zhandclАй бұрын
Hello HANS GARAGE. Why did you name your channel 'HAN's GARAGE'? 혹시 한국어를 할 줄 아세요? 저는 한국에서 E46 320i를 갖고 있어요. 당신의 영상을 우연히 만나게 되었고 HAN이라는 단어가 한국에서 익숙해서 댓글을 남겨봅니다.
@HansGarageАй бұрын
안녕하세요! 네 한국에서 태어나 미국에살고 있지요 이름은 한재일 이라서 그냥 심플하게 명따서 한스 가라지에요 🤣
@zhandclАй бұрын
@@HansGarage 답글 남겨주셔서 감사합니다. 미국에서도 항상 건강하시고 늘 행복하시길 바랍니다!
@HansGarageАй бұрын
@zhandcl 감사해요! 차사진있으시면 보내주세요
@zhandclАй бұрын
좋아요!
@takwatineАй бұрын
Good job ! Very nice, very useful. Thank you.
@davidfrank2824Ай бұрын
You are absolutely speaking the truth. Whenever I'm getting ready for an oil change I check around and for 5 years Walmart has the best price. They even have a good price on antifreeze.
@lizabethlynch2837Ай бұрын
Without a doubt, this guy is the best! He’s not only a mechanic, he’s also a teacher. Keep up the good work.
@Jantje33100Ай бұрын
Thank you for making and posting, helps a lot!👍
@apiwat_kАй бұрын
Thank you for showing me how to replace the strut
@simonedisanto3530Ай бұрын
Clip ons brand?
@FrankBogut-j1rАй бұрын
This happened to me with AGV. I went a size up and everything fit right. AGV fits small, IMO.
@FrankBogut-j1rАй бұрын
This happened to me. Went one size up and all is well.
@amlan2870Ай бұрын
Great Video Han. I recently bought 2021 iron 883. I want to change engine oil and gear oil. For that i need to buy tools. what tools i can buy and from where i should buy? Can you describe the tools or send me a link. thanks Amlan
@rays-777Ай бұрын
Thankx for the vid, I just changed them on my '19 X3 and BTW I kept being told to only use BMW plugs but I noticed the BMW plugs are basically NGK plugs with the BMW logo on it. So i just bought NGK iridium and it works just fine.
@sambathkong4141Ай бұрын
Just imagine have better tools. 🧰 Job be much easier 😂
@user-uv4sn9bc5kАй бұрын
Any HP gain? Website claims 22Whp
@ilyfetti2160Ай бұрын
my temp cluster never moves always in the middle even when i turn it off plesse help
@jindelicАй бұрын
Its not raining under the car, get in there!
@user-jn3vg3ts4fАй бұрын
It's alright!,it will wash away the little splishes from the Pan 😮😢😅❤
@yorgalasАй бұрын
Absolutely fabulous video, ive seen others and just wondered was it necessary to remove the power steering oump and engine mount bolts from the top of the engine, can you not just leave the ps pump on and undo the bottom engine mount bolts from the bottom? Just curious as i want to do this job soon too
@10ToGoProАй бұрын
You might need an Asian fit Helmet Different helmets are actually designed for different types of people Usually it’s American, European and Asian
@HansGarageАй бұрын
Nope just needed one size above MD/LG
@bauerjack19782 ай бұрын
Did you get anymore noise or harshness with the yellow mounts or do you think there better the original bmw ones
@georgebaloian82722 ай бұрын
Thank for the video about to change mine! So the downstream bank 1 is the rear plug right?
@joepapa522 ай бұрын
Can you share the link of the store you purchased them
@iPhoneAppReviewer2 ай бұрын
Does this cause a CEL?
@mattb30282 ай бұрын
Did you check the initial codes at the dealership or after you purchased it?
@HansGarage2 ай бұрын
Yes, cylinder 2 misfire
@mattb30282 ай бұрын
@@HansGarage Thanks for that. I'm surprised their mechs didn't assess the car better beforehand. You got a STEAL... I can't find anything in decent condition in BK, Queens, or NJ for the same price on FB marketplace. Got any connects or communities? Looking to join the E46 fam
@HansGarage2 ай бұрын
@mattb3028 ill keep a look out for
@kasrabahmanyar11932 ай бұрын
you can also just code this into your ews using bmw scanner instead of cutting up wires
@kasrabahmanyar11932 ай бұрын
just a heads up if your e46 is made after 2002 your clutch pedal safety switch is completely different