I just used my side cutters and cut of the piece that locks the drawer lol
@zapman21007 күн бұрын
if only they would listen to customers and make them what they wanted.
@MRTLEW0113 күн бұрын
Stop it dude!!!! 🥴That generator is not that loud!!! and who cares about there neighbor when its 100 degrees outside with no power?? tell those Texans that when they had that freeze a couple of yrs ago!!!!!!!!!!!!!!
@itisaporsche17 күн бұрын
Thank you a million times friend! Damn things tore up my finger tips.
@RodriqueLowe19 күн бұрын
Hi, where did you get the other added drawers from?
@E82djc12 күн бұрын
@@RodriqueLowe I bought 3 carts lol
@AimingWanderously21 күн бұрын
I recently got the Series 3 27" roll cab (love it) and I HATE those latches. I always feel like I'm opening the drawers twice because I forget the latches are there and have the grab the latch each time. Searched YT for a vid on someone mod'ing this, and here we are. Thank you!
@1188clean2 ай бұрын
Think for the same price you can get the icons from harbor freight. I found gear wrenches for like 90, I'm going to scoop them up
@theodorehartman50862 ай бұрын
Thank you very much for the information. This is exactly what I needed. I just purchased the 56 inch bottom rollaway the 56 inch top box and two of the side boxes in white. Anyway, I'm going to put this laptop away and go delete some locks. Thanks again.
@AimingWanderously21 күн бұрын
I have the white too, it is so sharp looking.
@CorvetteTrev2 ай бұрын
Wish i could get a 90T spline . The 120 is problematic
@sidewayssedan40243 ай бұрын
hey did you use the 4 drawer or 5 drawer side tray? thanks in advance
@kobewilson6403 ай бұрын
I love the setup! I bought the 56in toolbox and am waiting for it to come in. While I was debating whether or not to get the 72in over the 56in, I realized that if I bought the 27in with the 56in and bolted them together, the toolbox would be 83in overall and 400 dollars cheaper than the 72in!
@rexisretro3 ай бұрын
For the flex head ratchets you can actually really easily remove the locking mechanism, for whoever doesnt want it
@CorvetteTrev3 ай бұрын
I have 3 in my set that are totally busted on the ratchet mechanism, I wish they were simple 90T , all binding up
@E82djc3 ай бұрын
I believe I have 90t as well just no flex head- honestly I like those more
@megaman0103913 ай бұрын
Where did you get those side trays? I can't seem to find them on Amazon
@michaelmiskell3 ай бұрын
You are being so dramatic the 4375 is not that loud I can hardly hear mine on my back porch like 30 feet away
@E82djc3 ай бұрын
After numerous complains from clients I swapped
@88gmchog4 ай бұрын
My go to 3/8 for the last 15 years has been a Snap on swivel head, bought one cheap at a pawn shop for like $45 and when it had issues with the handle slipping off my driver gave me a new one, I have had it since. This year I have picked up a few snappy flex heads to try out too..... finally
@ZER0o104 ай бұрын
Nice! Thx bro
@realthatbrian4 ай бұрын
Which organizers are those?
@pico67ss5 ай бұрын
Or you could call it in and keep your old one
@drticzon5 ай бұрын
I got my 4375 for $329.99 in the year 2020. In the last 4 years, it has seen us through 3 blackouts. Still starts with one pull after 4 years.
@donnie0175 ай бұрын
Getting the 4375 next month. More bang for the buck.
@Terrydrake8685 ай бұрын
Another tool showing a toolbox queen and his unused tools, how original!!!
@E82djc5 ай бұрын
😂😂😂😂 guess your right man
@oqhr5 ай бұрын
How does TEKTON campares to CAPRI in general ? (Price, quality, etc)
@E82djc5 ай бұрын
That’s an interesting video idea ! I personally don’t really have a preference, both prices are amazing , warranty’s are great, and I beat on both brands pretty good. I honestly would pick Tekton if I only could choose one. But only for a few very small reasons.
@carlosleandry125 ай бұрын
The way to go is to do multiple smaller ones instead of the big 72
@E82djc5 ай бұрын
Absolutely the best way to go! This is 112 inches and cost less than a 72!
@vincebowling17785 ай бұрын
Very nice setup! 👍
@E82djc5 ай бұрын
Thank you so much !
@user-pf9bl5pu8u6 ай бұрын
Can I do this on my 56” us general series 3 toolbox ??
@E82djc5 ай бұрын
Yes you can!
@fishingmontana15646 ай бұрын
How would you compare that to your snap on i hsve the same box and love it but was going to get the hobo freight box but they pisssed me off by not warranty a broke tool so i got the snap on box the next week but they look very similar
@E82djc6 ай бұрын
I wouldn’t switch over fully in my opinion. The drawers are not as nice as my snap on. I will have a review coming out in the next few days highlighting delivery time, quality of each box… bc somehow even tho the 42s are the same the quality is different, and everything else I can think of !!
@fishingmontana15646 ай бұрын
@E82djc interesting I love my snap on box and really it should be the only box I will need if I can just stop buying tools cause I like them lol and hearing that makes me not feel as guilty for going with the snap on box now and I will keep watching your channel when I get time I like looking at how ppl set their box up so I can try to set mine up better you got a new subscriber with me I would say go check out my box tour but it's my old box and have not done one on my snap on box yet
@E82djc6 ай бұрын
@@fishingmontana1564 dropped u a sub my man! These are amazing overflow boxes if you run out of room and have space for another 56-72 inch . I just wouldn’t load it down full of weight.
@pedaltheglobe4196 ай бұрын
The biggest flaw have found so far in my series 3 boxes is they only latch on the right side. So If you pull on it on the left side it attempts to come out at an angle and puts excess strain on the guides.
@E82djc6 ай бұрын
My snap ons are similar but yes I have noticed this as well
@pedaltheglobe4196 ай бұрын
I have a 72 and 56 bolted together. Not sure if you are aware but the instructions state to remove the wheels from the adjacent bench that do not rotate.
@E82djc6 ай бұрын
I did leave them for now, but yes I noticed that. I’m between putting them all on 2x4s or just leaving it
@starnesandcars6 ай бұрын
I have that trio in series 2 orange boxes and I’m switching to the grey with two 56’s and a 27. Looks awesome
@E82djc6 ай бұрын
Man do I wish I had the space for that!!! The goal when I move into my new shop is to add a second 27, and a 56-72 for the middle
@mn4a156 ай бұрын
Awesome
@E82djc6 ай бұрын
Thanks man!
@conanrdk6 ай бұрын
Those cabinets look like they were made for that space! Can't wait to see it with the topper you have planned!
@E82djc6 ай бұрын
Thanks so much dude!
@davehaggerty34056 ай бұрын
Like the grey!
@CommanDOH-JKU6 ай бұрын
@7 minutes you mention that they are not meant to hold a ton of weight, I have a 72" and my entire top draw is full of impact and hand drive sockets, weighing at least 3-400+ lbs, and it has no issues whatsoever. Still slides like there is nothing in the (you can feel it in the momentum though).
@E82djc6 ай бұрын
Good to hear! Maybe these smaller boxes have less bracing, when I had my top drawer weighed down… it felt very wobbly / I was scared it would break on me. I took some of the stuff out and put it on my pegboard
@CommanDOH-JKU6 ай бұрын
@@E82djc The 56" and 72" top draw has double rails, it may be the difference, though I have a good amount of weight in some of the other drawers also. BTW, you mentioned that you bolted the two HF cabinets together. I'm hoping to do the same when I get my next one. I bought the 72" w/Hutch, and two 22" side cabinets, and looking to add another 42" with an upper cabinet to accommodate all my tools. I was going to put the second box connected to the 22" cabinet, but would rather have all the drawers in the center, I'm not sure if the cabnite sides lined up because of the different wheel sizes, though may just be the 72" that has the really big HD wheels...
@thomasahlbrand77656 ай бұрын
I have the 4375 and yes it is noisy but I don’t really know of any generators that are that quite. I don’t really care and the 4375 has more options than the 3500. Not worth the extra $500 to me . But it’s your choice and I can appreciate that.
@CountryMileGarage6 ай бұрын
On my toolbox I ordered a butcher block top from Lowes and when I got it home I used a router to cut grooves for the box edges
@E82djc6 ай бұрын
Thank u man I really appreciate this! This might be a chance for me to finally buy a router 😂
@nordicjeff15 ай бұрын
I'm doing the same thing I have the block and the toolbox since October just need router
@E82djc5 ай бұрын
@@nordicjeff1 lol you sound like me 😂
@kevinkeith53726 ай бұрын
Where did you get the yellow organizers for the 27” box?
@E82djc6 ай бұрын
Harbor freight in the bin organizers
@conanrdk6 ай бұрын
Maybe you will go full circle and go back to the green cabinets...haha! Just messing with you. I like the idea of LED light strips around the peg board you had mentioned.
@E82djc6 ай бұрын
Thanks for supporting since the start bro 🥹 grey for life now!
@conanrdk6 ай бұрын
@@E82djc You got it! And I agree with the grey!
@RobertLeBlancPhoto6 ай бұрын
4:53 *Self Centering pilot hole drill bits. Great for anything that you need precise mounting holes for, such as hinges, drawer glides, mounting brackets, etc.
@E82djc6 ай бұрын
Thank u! This^
@MegaFrank19606 ай бұрын
Wall Control is where it's at, unless of course, you've got money to burn !....lol
@E82djc5 ай бұрын
Wall control works great too! I have a few buddies who use it in their shop. I personally prefer the Omni wall features / mounts
@conanrdk6 ай бұрын
Nice haul! Looking forward to the next one!
@conanrdk6 ай бұрын
Hey welcome back! The stainless bench was a good idea and looks great. Your business sounds like it's going well. Congrats on that!
@E82djc6 ай бұрын
Thanks man! I appreciate it! Thanks for watching
@robertcasey35287 ай бұрын
Only one missing is the rotating head ratchet
@E82djc7 ай бұрын
I’m actually thinking of getting those!
@chriscalderin66777 ай бұрын
The folding ratchet is awesome the first person to see mine ordered one immediately. I have three tekton ratchets that are all in my top five favorites.
@BraydenSB7 ай бұрын
Did your soft close rails ever wear out on you?
@E82djc7 ай бұрын
Not sure I sold them before I could find out 🥲
@BraydenSB7 ай бұрын
@@E82djc I remember your Facebook post, iirc you went to a Snap On setup, ironically I went from an 84” Snap On Epiq with Hutch and sold it, bought the 73” Icon with hutch and side locker and got this full bank cart. I will NEVER go back or likely buy another toolbox! Love these things and work out of them every day!
@E82djc7 ай бұрын
@@BraydenSB I had an icon for a bit and honestly really loved it. The new Series 3 is amazing too. I have nothing bad to say about the hf boxes- just less options
@jayer-su3hu2 ай бұрын
I was gonna get the Icon box but sheeeet at $7k outfitted the way I wanted it I had to go with the 56" US General. Not quite the quality but I'm not a professional tech, just a regular Joe DIY. No need for a pro tech quality box.
@BraydenSB7 ай бұрын
Dude! This is great. Absolutely love these carts but I have always felt the latches feel “cheap”. Use this thing DAILY and never looked further into it!
@jeremywoodall98007 ай бұрын
But honestly I wish you would just be honest about how honestly you feel to be honest about your honest opinions. Since you’re being honest… Lmfao just poking you man. Good vidja
@jeffro2217 ай бұрын
Must be discontinued. The item # listed below at HF brings no result.
@oscarmarin21593 ай бұрын
59851 looks like this but 3 times and out together. Each drawer has its own key on this video. Sick tho.
@scod39087 ай бұрын
Do you have the packaging? Taiwan vs mainland China GW products? Or perhaps just an update to differentiate them from the cheaper 72T sets? The product currently supplied in Australia is the "flank drive" style open end, with the metric sizes coloured in (Amazon spec in your vid). The 90T sets are 20-30% more expensive than the 72T sets Is there any difference in feel/quality between the two in your opinion?
@Ausfahrt8 ай бұрын
Good comparison but you failed to mention the main reason that I went with the 4375. It has 240 volt capability and one thing I need my generator to do is run my 240 volt well pump. That being said, the 3500 is great and will work for many people.