RedRider2k2

Пікірлер

@corrib4026 2 күн бұрын

If you watch them idle in slow motion you can see the extra fuel coming out the exhaust.

@X2BRODUO 14 күн бұрын

Olive oil is amazing for the bike trust

@Rickenbacker1985 20 күн бұрын

I did unhook my cables at the exh.

@lukedelehanty6412 20 күн бұрын

NB's roads are a disgrace.

@superkas Ай бұрын

After 2,5 years of being a widow:

@stevengrissom7142 Ай бұрын

Awesome ty

@Rraven19 Ай бұрын

How does one titan the steering damper

@thereisnospoon52 2 ай бұрын

These engines take 1000 horsepower just to power the supercharger at full throttle.

@usmcromp8769 2 ай бұрын

How did you loosen the original bolt in the flywheel?.?

@Redrider2k2 2 ай бұрын

It's been a while but basically just spin it out while holding the crank from turning

@jonathanjoestar__ 2 ай бұрын

The oil looked a bit brown maybe check for coolant leaks. It'll save you a lot of money down the line

@Redrider2k2 2 ай бұрын

That's not what oil that's contaminated with coolant looks like.. Used oil is brown. My used oil is extra brown because it's already dark when it's new.

@AhriCRose 2 ай бұрын

Hey, thanks for bringing up the flashing light issue. I bought my bike with the light already flashing, and it's been really distracting, especially at night. I'm considering removing it because it's annoying. Did it just fix itself?

@Redrider2k2 2 ай бұрын

It still does it once in a while. Totally random. I've just learned to live with it 😆

@AhriCRose 2 ай бұрын

@@Redrider2k2Mine keeps flashing constantly :( I did a little research and it seems that it could be because the speed limit setting is too low. If you go over the set speed, it'll flash. Maybe yours is set to a higher speed, which is why it's not flashing as often.

@Michael-f6p2h 3 ай бұрын

Actually the ninja 400 the cover has different size bolts not just one

@RickSchaefer-c1s 3 ай бұрын

I think maybe you forgot to put the snap ring after seating oil seal, then after snap ring is installed, then seat your dust seal. Or did I miss something?

@Redrider2k2 3 ай бұрын

Popped it in at about 6:34

@jcf6597 3 ай бұрын

How does the Sherpa compare to your KLX 250 for power on the highway?

@Redrider2k2 3 ай бұрын

Honestly I've only driven the Sherpa for about 500ft so it's a tough call. I'm positive it'll be more comfortable!

@alexesco1521 3 ай бұрын

Is there a way to make short in order to lower

@Redrider2k2 2 ай бұрын

Usually.. but I've never bothered with anything like that. You can also raise the forks in the triples to achieve the same thing. You just won't be able to go far before they hit the handle bars and of course it'll change the suspension geometry a bit.

@eduardochavezmartinez8463 4 ай бұрын

Mi segunda moto deportiva.. sin duda la competencia tenia mejor estética en sus años.. pero está tenía más potencia

@azmaymi9237 4 ай бұрын

Mine came wit fuse and fuse blown how do I replace?

@MadStylee619 4 ай бұрын

I had to change my clutch twice in Three months, seriously wtf is going on Kawasaki!? My clutch is fucking slipping again! What is it?! I have the spring that pushes back the clutch cable and new Kevlar plates from Barnett. Is there a nut to tighten the basket? Fuck me

@mikismarques83 4 ай бұрын

Bonita esa ZX14, la hermana mayor de la mía (ZX12R Ninja 2001, la que no está limitada). 🚀🥷🏻

@GRPPLRJORDAN 4 ай бұрын

I got a Vulcan 1500 trying to get passed the flywheel to get the stator. Will this work

@lukedelehanty6412 5 ай бұрын

mt-10 sounds awesome

@JoeThorne-j6g 5 ай бұрын

It’s not MPG on a dragester it’s gallons per 1/4 mile

@I-embarass-gamers 5 ай бұрын

your car uses miles per gallon, these cars use gallons per mile

@I-embarass-gamers 5 ай бұрын

“yes officer its stock”

@GeoffScott-e7d 5 ай бұрын

Back in the day Honda 900 used rear axles bolt to remove flywheel

@Finnjaymakes 5 ай бұрын

All coffee makers be jealous! 😂

@arthurdevieirasobral6467 6 ай бұрын

.....GIMME FUEL, GIMME FIRE, GIMME THAT WHICH I DESIRE!!!!🔥🔥🔥

@BastardX13 5 ай бұрын

Oooh YEAH!!

@hunterplayz2174 6 ай бұрын

Rare zx10r.. 👀

@Username-2 6 ай бұрын

If you need to turn or maneuver the bars quickly for example in tight traffic or city riding you might not want it fully tight because it slows down how fast the bars react to input.

@Redrider2k2 6 ай бұрын

I'm talking about THIS damper on these bikes in particular.. Trust me, you don't want it anywhere but fully tight. It's common practice for people to take them apart and modify them to make them even stiffer.

@PostBoyz 6 ай бұрын

Mine was fully lose 🙏🙏🙏 bless this man

@40thzx6 5 ай бұрын

if you this slow you prolly should sell the bike

@PostBoyz 6 ай бұрын

Best video, life saver

@PostBoyz 6 ай бұрын

I have this bike, watched this video, and immediately did that, probably saved my life

@tyrell12345678955 6 ай бұрын

Did you just replace the retainer. or and the coller as well. wish you went more in depth with the process

@Redrider2k2 6 ай бұрын

Everything was replaced on the valve that dropped. Valve, Spring Seat, Spring, Guide, Retainers and Collets/Keepers. The rest got new retainers and reassembled.

@akmankalash 7 ай бұрын

every bike has at least ONE issue you gotta address should be recall item but they know we do our own work

@carpenter751 7 ай бұрын

Thank you for your video. I bought the race tech kit for my 82 nighthawk but havent yet installed it but i felt stupid for spending so much once i saw the progressive kit for like a third of the price but i new race tech was going to be the way to go in the end.

@Redrider2k2 7 ай бұрын

I thought the same thing at first and even bought and installed the Progressive springs. Not even 500 miles later I realised my error and they came back out.

@lubacotemobile 7 ай бұрын

Are there any GDI dragsters?

@MhmdAntar-zv7jo 7 ай бұрын

Like this injection 16 in 2 head and 8 in intake and 😱 8 in plower🤦🏻‍♂️ Ratio 1 Bay 1 air and fuel

@michaelmacasaet6011 7 ай бұрын

whats the part number of the pull rod?

@0x7FFFFFFFFFFF 7 ай бұрын

I remember watching your first vid about the retainers and the valve dropping, I also switched the retainers on my gen 1 for gen 3 retainers, disturbing to learn what happened to yours again! It's such a weird thing, I can only imagine there are hundreds of bikes out there running fine with broken retainer fragments under the tappets, and actual issues arising from it seem pretty rare, still you don't want that nagging feeling that something could go wrong AGAIN!

@Redrider2k2 7 ай бұрын

It's something that really causes you to worry because there's no sign that there's any problem until all of a sudden there's a HUGE problem. Then there's all of the ones that I didn't change this time.. Who's to say they didn't crack the very next day? Needless to say, this bike is going to be running a VERY short valve inspection schedule

@3Phase50Weight 7 ай бұрын

Gallons per mile

@haramaschabrasir8662 7 ай бұрын

Only 400 ml of that is actually converted into motion.

@tugraersozlu2149 7 ай бұрын

loved your video bro. can you buy me my first bike :)

@Redrider2k2 7 ай бұрын

I'll put it on my shopping list.. But I may have a few more that I need to buy for myself before getting to it 😁

@tugraersozlu2149 7 ай бұрын

@@Redrider2k2 your mere consideration means more than the world to me ❤️

@PeterDavis-by1uw 8 ай бұрын

Dam I miss days like this 😢

@mike24bou 8 ай бұрын

It was a great ride! We should do it again this summer...for sure!

@Redrider2k2 8 ай бұрын

Absolutely!

@lukedelehanty6412 8 ай бұрын

what a great place to be on a beautiful summer day. looks like mike did a great job touring you around.

@Redrider2k2 8 ай бұрын

It was! That's another area I always enjoy but don't get to see too often

@jaynorthrup3050 8 ай бұрын

Buying one of these tomorrow. I live in AZ and just moved to a neighborhood with desert access. I can't wait. If I wasn't an OG (55) I would have gone with a 450, but I'll be content just cruising--bike cost used is very fair.

@Sans_.1478 8 ай бұрын

Finally a bike vid that doesn’t involve someone going 120 mph

@lukedelehanty6412 8 ай бұрын

6:35 - slack jaw driver grrrr

@toastmantoasty 8 ай бұрын

The ratio of nitromethane to air is so high, that just before ignition the nitro becomes so compressed and homogenous that for a split second it becomes a freaking *solid.*

@Lsthnbrd 8 ай бұрын

At first I was like “huh, that’s not that crazy” then I realized that was at idle…

Ең жақсы KZbin

Пікірлер