3rdzodiac

Пікірлер

@glossyliyah6023 20 күн бұрын

Idk if your still around here my good sir but thank you I as a female will now attempt on my own! Wish me luck 😆

@Garanimal 2 ай бұрын

Youre the goat. I dont need to watch you take bolts out. Just tell me what to disconnect. Great video thanks man

@3rdzodiac 2 ай бұрын

You're welcome and thank you.

@yahyawashere5660 2 ай бұрын

Good stuff right here ! I was done in 20 mins

@3rdzodiac 2 ай бұрын

Nicely done! Kudos

@richardpazramos9388 3 ай бұрын

Great video man I have the same problem but with my side mirror camera I don’t t know what to do with that

@3rdzodiac 3 ай бұрын

Thank you. What company did you purchase from?

@FierceIcon 4 ай бұрын

Will this work on a 2007 kia sportage?

@3rdzodiac 3 ай бұрын

If you have the 2.7 then yes.

@m3coupe4me 5 ай бұрын

That was perfect, thank you. Very helpful.

@3rdzodiac 5 ай бұрын

You're welcome and thank you as well.

@jacksonbruce3208 6 ай бұрын

Thank you Sir

@3rdzodiac 6 ай бұрын

You're welcome

@frankies9049 6 ай бұрын

This hurt me mannn I hope you didn’t get hurt God bless you

@3rdzodiac 6 ай бұрын

I made it out alright. Thank you. Miss the car

@embggotty708 7 ай бұрын

Did you put it on yourself or did you have to get the hangers welded on?

@3rdzodiac 7 ай бұрын

I installed it myself. No welding needed. Comes with everything to make it a bolt-on and go.

@embggotty708 7 ай бұрын

@@3rdzodiac mine arrived today I’m going to install it Saturday hopefully the stock bolts are not too rusty

@3rdzodiac 7 ай бұрын

@@embggotty708 Good luck and enjoy the new sound.

@embggotty708 6 ай бұрын

@@3rdzodiac hey how did you dispose your old exhaust

@3rdzodiac 6 ай бұрын

@embggotty708 I've had it all this time up until last July when my car got totaled. I pulled the Tsudo exhaust off and threw the factory exhaust in the back seat before they scrapped the car.

@embggotty708 7 ай бұрын

Do you know if it’s still for sale and is this something that I don’t have to weld on

@3rdzodiac 6 ай бұрын

Idk if they still sell this setup but no welding required. All bolt-on

@nelsongarcia5223 7 ай бұрын

Does it fit the v6

@embggotty708 7 ай бұрын

There is a V6 version on eBay

@3rdzodiac Ай бұрын

I'm unsure. I don't know anyone that has tried.

@cdgator1 7 ай бұрын

Totally helped thank you! Was helping a friend with the spark plugs . They said the coils are good but are experiencing some type of misfire or rough idle. Replaced the intake manifold gasket along the way. Still has a rough idle. There is a small exhaust leak not far off the headers. The owner says someone replaced the cam position sensor (I believe it wasn’t the crank position sensor, but could be wrong.). Any insight? Cheers!

@3rdzodiac 7 ай бұрын

You're welcome and glad I could help. First thing is to get a scan tool if you don't have one already and see which cylinders are misfiring on live data. Is the exhaust leak before or after the cat converter?

@cdgator1 7 ай бұрын

I’ve got a basic scanner and not sure about the leak. It can be heard clearly in the front driver side wheel well. Thanks for the reply!@@3rdzodiac

@deandrebaker5167 8 ай бұрын

Great video, nothing extra, just straight to the point!

@3rdzodiac 8 ай бұрын

Thank you. Exactly the feedback I was hoping for.

@jaylanvaughn2247 Жыл бұрын

did you have any problems with your car? or check engine light and stuff?

@3rdzodiac Жыл бұрын

No issues whatsoever.

@xizsv.702 Жыл бұрын

Bro so did you get that house off top right

@rx3004 Жыл бұрын

boss man yk where i can find the website for this exhaust?

@3rdzodiac Жыл бұрын

You'd have to google to see who has it. Got this one off Ebay and only saw one more for sale at that time.

@MUDDUCK09 Жыл бұрын

Good look. Exactly what I needed to know. Thank you.

@3rdzodiac Жыл бұрын

You're welcome

@carsonk.5899 Жыл бұрын

how’s the smell from the PCD?

@3rdzodiac Жыл бұрын

Smell? I've never noticed a difference from stock to PCD tbh.

@carsonk.5899 Жыл бұрын

@@3rdzodiac ah thats great, thanks

@3rdzodiac Жыл бұрын

You're welcome

@tyreelord7927 Жыл бұрын

Va Newport News old Kmart Parkin lot

@3rdzodiac Жыл бұрын

Hell yeah, lol

@carnaljnublaqthought Жыл бұрын

That's 🔥 Cuz!!!!

@3rdzodiac Жыл бұрын

Preciate it

@nyn3482 Жыл бұрын

Taking off the throttle body make it easier taking the back bolts off the manifold

@Infamous_q50 Жыл бұрын

Car is sick af ❤it !

@3rdzodiac Жыл бұрын

Thank you

@jomabug76 Жыл бұрын

Same in 02 thru 2006 altima .and same in maximas even to now same engine in maxima

@jomabug76 Жыл бұрын

Easier to just take entire thing off ...i can tune up 3.5 liter plugs and coils in bout 20 min complete ive done so many times..and i fot rid of factory crap airbox sux..put ram air or cold air on it..twice the power and gas ..and i got rid of crappy factory exhaust .again twice the power from that alone

@cristianortiz1684 Жыл бұрын

You don’t get power from an exhaust and a hot air intake lml

@3rdzodiac 10 ай бұрын

You don't get twice the power from just an exhaust and intake upgrade. You can gain a little from tuning it tho.

@riyaandrayplay6856 Жыл бұрын

Perfect

@MrAccordj30 2 жыл бұрын

Atleast you got the 6 speed! Car looks really clean maybe just add a lip kit in my opinion

@3rdzodiac 2 жыл бұрын

Thank you. I do have the HFP style front lip but that's it rn. Looking to get the matching rear later. Not sure on sides tho

@Trippyjayy6 2 жыл бұрын

Explain it rather then the music🤦🏽‍♂️

@3rdzodiac 2 жыл бұрын

Mute the sound, look and read. It's not that hard.

@isaacsalcedo98 2 жыл бұрын

He said them tires where garbage 😂 , shit fire tho Brody 💪🏻 Taking some tips

@3rdzodiac 2 жыл бұрын

Lol. Preciate it

@jameslee6388 2 жыл бұрын

Way easier to just take apart the 2 piece manifold at those 4 bolts. But to each their own

@3rdzodiac 2 жыл бұрын

Definitely not easier, but yes, to each their own.

@HoweHobby 2 жыл бұрын

I know it's based on skill set, but about how long does it take to remove it?

@3rdzodiac 2 жыл бұрын

With all the right tools in hand, give or take 30mins or less.

@oneofthemnames3050 2 жыл бұрын

💦 Clean

@3rdzodiac 2 жыл бұрын

Thank you

@nazarleonov275 2 жыл бұрын

Send link where u bought it pls

@3rdzodiac 2 жыл бұрын

Ebay at that time. You'll have to Google and see who sells it now.

@nazarleonov275 2 жыл бұрын

Where tf did u get it

@3rdzodiac 2 жыл бұрын

At that time, Ebay.

@sethhustava172 2 жыл бұрын

how did the exhaust system hold up over the years ? Lookin to buy one after Christmas lol

@3rdzodiac 2 жыл бұрын

Still holdin as good as day 1. Make that purchase.

@sethhustava172 2 жыл бұрын

@@3rdzodiac sick bro! Thanks for the feedback ! Stay mobbin 🤝

@3rdzodiac 2 жыл бұрын

@@sethhustava172 You're welcome. Also, look into purchasing an RV6 PCD. It'll give you a little more power but most importantly, make the exhaust sound better. There's a little rasp around 2500-3000rpm with the stock exhaust manifold. The RV6 will replace that.

@sethhustava172 2 жыл бұрын

@@3rdzodiac any personal preference on Aftermarket websites? Normally eBay’s been my go to lol !

@3rdzodiac 2 жыл бұрын

You're laughing but Ebay has been mine since 03, lol. I love Ebay. Buy a lot of vehicle parts on there. New and used. They have the best deals. Brake and rotor kits if you're ever looking. Other than that bro, I just Google the part(s) I need and whoever is cheaper I go with. Exhaust was purchased on Ebay. RV6 PCD was purchased on rv6-p.com.

@ThatinParticular 2 жыл бұрын

Any idea if the intake manifold has go come off on the 3.5 Altima in order to replace the exhaust manifold gasket on the back cylinder bank?

@ThatinParticular 2 жыл бұрын

Has to come off*

@3rdzodiac 2 жыл бұрын

I believe so. Would be harder trying to access the exhaust manifold bolts/nuts from underneath.

@jomabug76 Жыл бұрын

I dont see any rrason why u have to take off intake manifold ...just the exhaust manifolds ..only thing u taking off and i fixing to take my exhaust manifolds off ..i tell u soon ..

@DatBoyDere 2 жыл бұрын

So whatever happen to 15in and laggy like slow to open apps and gps stuff and I’m Loki h to get one which size would u suggest 12. Or 15

@3rdzodiac 2 жыл бұрын

Definitely go with the 12. Looks better and functions better.

@jaykin9453 2 жыл бұрын

How do you take the intake off from a 2005 Nissan Altima v6

@3rdzodiac 2 жыл бұрын

Intake or intake manifold?

@waelhabel7844 2 жыл бұрын

Wherea fuel line ?

@3rdzodiac 2 жыл бұрын

Between the Intake manifold and front valve cover.

@biggcebo 2 жыл бұрын

Does the lane camera work?

@3rdzodiac 2 жыл бұрын

There's an option for it so I would assume so but, still ask around to be sure because I have a Sport which doesn't have that feat.

@blshotlexusjay9537 2 жыл бұрын

Sounds great do you have link to this

@3rdzodiac 2 жыл бұрын

Thank you. No link unfortunately. Last I looked they were sold out. Google "Accord Tsudo SP2 exhaust" and see what comes up

@horacehall6013 3 жыл бұрын

I finally got it on and it was exactly what I wanted. Nice deep tone. Just want to get the long tube headers and down pipe later after suspension / brakes upgrade.

@3rdzodiac 3 жыл бұрын

Glad you like it man. You'll love the sound more once you do the downpipe upgrade. Good luck on your build.

@horacehall6013 3 жыл бұрын

I just got my Tsudo cat back exhaust and this video sold it for me. I cant wait to hear it live vs video. Just trying to find some time to do it. I didn't want a loud ricer sound. I wanted it alittle deep and mature sounding like this.

@3rdzodiac 3 жыл бұрын

Congrats. I know that exhaust has been hard to find. Add a RV6 PCD to your exhaust and get a lil extra hp.

@horacehall6013 3 жыл бұрын

I will definitely check that out , thanks bro!

@horacehall6013 3 жыл бұрын

I cant tell you how much I run across ricey sound exhaust down here in NC. Im going to try to get it installed this weekend.

@3rdzodiac 3 жыл бұрын

Yeah there's plenty of that here in VA too, lol. Best part about this exhaust is the cold start. Love how aggressive it sounds.

@PNWBootMan 3 жыл бұрын

What kind of exhaust is this?

@3rdzodiac 2 жыл бұрын

Tsudo SP2

@Ygliltony 3 жыл бұрын

Dat thang right

@3rdzodiac 3 жыл бұрын

Thank you

@zen3745 3 жыл бұрын

Bro 🔥🔥🔥 I’m also modding my Honda as well

@zdeat 3 жыл бұрын

Do you have a down pipe in this video?

@3rdzodiac 3 жыл бұрын

Yes

@visionarxy Жыл бұрын

What down pipe?

@3rdzodiac Жыл бұрын

RV6 PCD (pre-cat delete)

@keken_25_pr48 3 жыл бұрын

Sick

@3rdzodiac 3 жыл бұрын

Thank you

@zdeat 3 жыл бұрын

I heard someone else had an issue with fitment on the rear floor brace, did you have that issue too?

@3rdzodiac 3 жыл бұрын

It's a pretty tight fit but I didn't struggle anymore than 10mins with adjusting it to fit.

@ChillGilMusic 3 жыл бұрын

nice accord sport

@3rdzodiac 3 жыл бұрын

Thank you

@itsbearnshd1427 3 жыл бұрын

I like your car got the same one the only difference I did with mine was I just installed a third speaker in the back window but it was a sub. Super low profile super clean super effective.

@3rdzodiac 3 жыл бұрын

Thank you. Funny enough, I actually thought about doing that before I went the route I went.

@itsbearnshd1427 3 жыл бұрын

@@3rdzodiac that's ironic because it's cheaper that's mainly the reason I did it I got everything connected to the back speakers so there's no extra work or wires.

@3rdzodiac 3 жыл бұрын

@@itsbearnshd1427 I may go that route whenever I redo my air ride.

Ең жақсы KZbin

Пікірлер