I apologize for not recording the whole process but I didnt think about it until after I removed it. Hopefully this is enough to help someone do the job.
Пікірлер: 48
@GaranimalАй бұрын
Youre the goat. I dont need to watch you take bolts out. Just tell me what to disconnect. Great video thanks man
@3rdzodiacАй бұрын
You're welcome and thank you.
@nyn3482 Жыл бұрын
Taking off the throttle body make it easier taking the back bolts off the manifold
@yahyawashere5660Ай бұрын
Good stuff right here ! I was done in 20 mins
@3rdzodiacАй бұрын
Nicely done! Kudos
@jjsiegal13 жыл бұрын
Good work Man. I am changing my plugs in back and was told to change the "Intake Gasket" too (while there).
@3rdzodiac3 жыл бұрын
Thank you and yes that's a good recommendation.
@MUDDUCK09 Жыл бұрын
Good look. Exactly what I needed to know. Thank you.
@3rdzodiac Жыл бұрын
You're welcome
@deandrebaker51676 ай бұрын
Great video, nothing extra, just straight to the point!
@3rdzodiac6 ай бұрын
Thank you. Exactly the feedback I was hoping for.
@jomabug76 Жыл бұрын
Same in 02 thru 2006 altima .and same in maximas even to now same engine in maxima
@cdgator16 ай бұрын
Totally helped thank you! Was helping a friend with the spark plugs . They said the coils are good but are experiencing some type of misfire or rough idle. Replaced the intake manifold gasket along the way. Still has a rough idle. There is a small exhaust leak not far off the headers. The owner says someone replaced the cam position sensor (I believe it wasn’t the crank position sensor, but could be wrong.). Any insight? Cheers!
@3rdzodiac6 ай бұрын
You're welcome and glad I could help. First thing is to get a scan tool if you don't have one already and see which cylinders are misfiring on live data. Is the exhaust leak before or after the cat converter?
@cdgator16 ай бұрын
I’ve got a basic scanner and not sure about the leak. It can be heard clearly in the front driver side wheel well. Thanks for the reply!@@3rdzodiac
@xizsv.702 Жыл бұрын
Bro so did you get that house off top right
@ThatinParticular2 жыл бұрын
Any idea if the intake manifold has go come off on the 3.5 Altima in order to replace the exhaust manifold gasket on the back cylinder bank?
@ThatinParticular2 жыл бұрын
Has to come off*
@3rdzodiac2 жыл бұрын
I believe so. Would be harder trying to access the exhaust manifold bolts/nuts from underneath.
@jomabug76 Жыл бұрын
I dont see any rrason why u have to take off intake manifold ...just the exhaust manifolds ..only thing u taking off and i fixing to take my exhaust manifolds off ..i tell u soon ..
@cpenister62183 жыл бұрын
Great work the best video for intake removal thanks!
@3rdzodiac3 жыл бұрын
Thank you
@jaykin94532 жыл бұрын
How do you take the intake off from a 2005 Nissan Altima v6
@3rdzodiac2 жыл бұрын
Intake or intake manifold?
@HoweSoundandHobby2 жыл бұрын
I know it's based on skill set, but about how long does it take to remove it?
@3rdzodiac2 жыл бұрын
With all the right tools in hand, give or take 30mins or less.
@bobespnza-la70303 жыл бұрын
I’m assuming the SE-R has exactly the same service maintenance as these models, right??
@3rdzodiac3 жыл бұрын
🤷🏾♂️ I'm assuming Nissan didn't go out their way to change around too much.
@bobespnza-la70303 жыл бұрын
@@3rdzodiac thanks bro
@jomabug76 Жыл бұрын
Yes ser is no diffrent .same motor .as maxima and any se altima..ser just has 10hp more than se model thats it .lol
@jameslee63882 жыл бұрын
Way easier to just take apart the 2 piece manifold at those 4 bolts. But to each their own
@3rdzodiac2 жыл бұрын
Definitely not easier, but yes, to each their own.
@ronaldjarnagin50183 жыл бұрын
What size bolt in the back by the two hoses and plugs
@3rdzodiac3 жыл бұрын
If my memory serves me correctly, it's a 12.
@ronaldjarnagin50183 жыл бұрын
@@3rdzodiac ohh. Yeah mines a lot smaller I can’t tell if mines an 8 or a 9 because 10 is too big but I’m not sure how to get down there and get it off
@ronaldjarnagin50183 жыл бұрын
@@3rdzodiac wait I could be looking at the wrong bolt. I seen another video saying it’s a 12 so I think you’re right, Thank You!
@3rdzodiac3 жыл бұрын
@@ronaldjarnagin5018 You're welcome
@ronaldjarnagin50183 жыл бұрын
@@3rdzodiac one more question if you don’t mind, the two clips behind the manifold, how do I get those off of their brackets? Do I just pull them up? They seem to be on pretty tight
@waelhabel78442 жыл бұрын
Wherea fuel line ?
@3rdzodiac2 жыл бұрын
Between the Intake manifold and front valve cover.
@jomabug76 Жыл бұрын
Easier to just take entire thing off ...i can tune up 3.5 liter plugs and coils in bout 20 min complete ive done so many times..and i fot rid of factory crap airbox sux..put ram air or cold air on it..twice the power and gas ..and i got rid of crappy factory exhaust .again twice the power from that alone
@cristianortiz1684 Жыл бұрын
You don’t get power from an exhaust and a hot air intake lml
@3rdzodiac9 ай бұрын
You don't get twice the power from just an exhaust and intake upgrade. You can gain a little from tuning it tho.