The dash is really easy to take out

Great Video, was a big help!😊

This is exactly the kind of guy you don’t want working on your car…

Needed a little persuasion?????? HA!! Try this on a central PA car, LOL.

You also want to push the bar up while you’re tightening

My 2014 ram Laramie with the 5.7 hemi has been at the shop for 2 days and they can't figure it out. Today I stopped upthere with the extra fobkey I have and I told him it was the WIN module but he said he checked that first for voltage and it was good.. so I hope he sees this video.my truck standed me 30 miles from home in a sams club parking lot. The tow home was 157.00 with roadside Insurance. Then the tow up to the shop was another 70.00 bucks. I truly thought it was the starter. No clicks, all the lights and power windows work! Thanks man.

FJ

Leaf blower to get debris out.

Please help me understand! I just got myself Subaru Levorg 2016 and steering wheel if you ask me - is stiff when parked. So, is this normal? Because when driving a car is not bad, still would prefer to work smoothly, but it's not terrible. Should I still check it and ask mechanic's opinion? (it will cost me :(((() Great video btw! Keep going!

I went to the dealership where I purchased my 2013 Ram. Was able to purchase the ignition switch you have there. It only cost me $185. (Yes. My truck is a Laramie with remote start) Went home installed it. Same problem. Replaced battery in remote. Same problem. I’m at a loss. I have to like push in hard or bend the fob to one side or another to get it to start my truck. It sometimes takes a dozen or two tries to get it to start. Very frustrating.

What winch did you use. How was the mounting of the winch did you have to modify the bump im amyway to make the winch work? 😊

Mine just rubbed today on a bump when i was turning in on the mud flap and I have the factory size 265 70r17 Kanati mud hogs

Focus your blasting of contact cleaner on the top side of the circuit board. Under the plastic coil stuff. The contact is under there.

good stuff, aintnoway im paying 800+$ to get all fours done and 2 hrs work in a shop...ill do it myself....this will help, thanks

how much did it alter your speedometer? It doesn't look a whole lot different.

Simple and fast No bs no promoting special tools Thanks

Take old weight off first

Lock washer on the wrong side

Good video. Well done.

Thank you! You have helped yet another person! 👍🏽

Thanks for sharing. The only one video on yt do it yourself tricoat paint I found. How many coats of midcoat did you apply and if so what was the wait time in between and how is it holding up and looking since you di the job? I'm planning on painting my bumper very soon with same color tri coat mid coat according to paint code# on the car. But it doesn't look like 10 ounce paint can is enough for the job. I'll try to find a 12 ounce one if possible and clear too. Let me know, thanks!

Do you spray into the barrel as well?

What front bumper do you have on your 4Runner? Looks great.

Thank you so much

Just bought an 05 gx and frame is pretty rusty. I want to do the underbody spray. Did you do anything else before applying the paint? Love how your truck came out!

4''? 😂

I would add, there is a tool built in the bottom. Have a look

Love it!! Did you have to mod the inner wheel well at all. Are clearing the side steps? I'm looking for nice wheels that fits like yours with lifting the GX or having the use a heat gun to bend the liner. Thanks for sharing.

Thanks will give this a shot

I was taught that if there is both yellow and red dots the red takes precedence over the yellow dot

So are you saying that the part you linked that is plug in play ready out of the box will work, and you wouldn’t need to change the sensor harness using that one? This is a bit confusing…

You can also spray some soapy water where the bead is stuck on the duckhead so it glides much smoother if it doesn’t come off easy

Thanks this was a big help now gotta correct it tonight

2018 Ram 1500 3.6 replaced the fuel rail pressure sensor and a p018B code came up. Followed by engine stalling, switched the pins on the connector and it worked perfectly.

The lever will not open the tailgate. Any suggestions???

I’m still struggling with this code. I have a 2015 ram 1500 5.7 should I be using the square body or the circle body sensor? The one in the description is a sqaure body but you said that was the old style

The head gasket issues are so horrible

thanks for the fix procedure. I have a 2017 ram 1500 I bought new. I have had zero problems with it since new.. just one little thing …--- NEVER use carb cleaner or throttlebody cleaner on electrical components. I’m not sure about throttlebody cleaner, but I am positive that carb cleaner is an acid… cleaning something like this do you want to use electrical contact cleaner only… Just saying

OEM Frontier wheels for the 17's are 7.5" wide. +30 offset.

Nice video. I have the same exact truck, and I decided to go with the 1" leveling kit just in the front. I am concerned with rubbing and I don't wanna remove the mud flap. any regrets on going with the larger size? I'm about to replace my tires and I can't decide

great smart way to get the points w/o bs

Got mine 40% off in that same color was so happy

MHz = "Megahertz"

Thanks a bunch

Where are you located? Trying to gauge how hard itll be in WA to get mine off. Also how's moog holding up for ya?

Why do you keep repeating the word “Freon” there is no Freon in any car for decades r-12 was rejected in the early 1990’s

Yeah I tare up that lip I have a bubble on my side wall it sucks

At 17:28 after that I always rip the tire

I got a rim and I went through 3 tires I spin it and it gets caught on the wheel and rips the inside wall how do I get a really really tight wheel on

Can those be installed on 2005 1500 4x4?