Can I plug that into the back of my mirror power port?
@ej8_06xrsКүн бұрын
I have a cold air intake on my xrs and sounds amazing and when I hit lift sounds loud maybe a 5hp gain idk maybe not never dyno it but sounds cool
@camilo8cherylКүн бұрын
Im a DIY weekend warrior noob and just got this a year ago🤦🏻♂️just like to buy cool stuff that i don’t know how to use😂now using it after a year of just looking at it on my treasure chest to diagnose my Ram 1500 abs/anti skid and (“P”) lit in my dashboard🤦🏻♂️😫
@LoveDGrooveFanКүн бұрын
Couldnt watch with all the blinking lmao
@AlexAutoFun23 сағат бұрын
LOL, sorry man!
@richardr5888Күн бұрын
Just discovered this channel yesterday and love the content. Thank you. I have a 30 year old Lexus LS 400 that I use as a daily driver. It has THE SMALLEST side view mirrors for such a large car and I can never find a good setting for the driver's side, not to mention see enough to safely change lanes without craning my neck backwards. Definitely not safe to do in South Florida traffic. These types of mirrors with side view cameras (in reference to another video you did) are definitely what I need.
@AlexAutoFun23 сағат бұрын
Thanks Richard and welcome to the channel!
@marcelocabrera6688Күн бұрын
How you download a video from the device to your phone?
@AlexAutoFunКүн бұрын
Hi! The G890 does not support Wi-Fi. If you need Wifi & App support then you will want to go for the Wolfbox T10 or the G840H, here is the review for both of them kzbin.info/www/bejne/gKWXi6mZr9aFn5Y and kzbin.info/www/bejne/aIm0d6pjeJ2Zbpo Cheers!
@BUFFALOSOLDIERS1000Күн бұрын
Thanks.....good info
@AlexAutoFunКүн бұрын
You're welcome!
@BodaciousBКүн бұрын
How do you wire a rear parking camera?
@AlexAutoFunКүн бұрын
Hi! A single cable connects it to the main dash cam, here is my install video kzbin.info/www/bejne/qnrSgaSoa7J9nNk so you can see how that looks, Cheers!
@AlexAutoFunКүн бұрын
Hi Everybody! Here is my Dash Cam installation and hardwire video kzbin.info/www/bejne/qnrSgaSoa7J9nNk Cheers!
@AlexAutoFunКүн бұрын
Hi Everybody! Here is my Dash Cam installation and hardwire video kzbin.info/www/bejne/qnrSgaSoa7J9nNk Cheers!
@sunseeker8457Күн бұрын
Mine just came today. Question. I will 99.9% of the time have this with the rear camera on only has I have no windows in my van (the reason I brought it). But will it will record the front camera even if I can only see the rear view?
@AlexAutoFunКүн бұрын
Hi! Correct, the dash cam records both channels regardless of which one is displayed on the screen. And here is my install video kzbin.info/www/bejne/rGW5cqikr5ese5Y Cheers!
@stevekozel5253Күн бұрын
Awesome video!
@AlexAutoFunКүн бұрын
Thank you Steve!
@stevekozel5253Күн бұрын
Great informative video!!
@AlexAutoFunКүн бұрын
Thanks Steve!
@360chrisflipКүн бұрын
Mine refuses to work after it was paired via Bluetooth 😂
@kri100off7Күн бұрын
I have G840S .. but WiFi is only in G840H
@AlexAutoFunКүн бұрын
Hi! Correct, the G840H has the Wifi function as show in the video, Cheers!
@kri100off7Күн бұрын
@AlexAutoFun thx
@AlexAutoFunКүн бұрын
@@kri100off7 You're welcome!
@DONDZIO2 күн бұрын
will this camera work with rear camera equipped with trigger wire for reverse
@AlexAutoFunКүн бұрын
Hi! Nope, this dash cam does not support park assist (this is a rare option on traditional stick dash cams), however here is a good alternative that does kzbin.info/www/bejne/q4rLeZqgfpaihac Cheers!
@mastershredder20022 күн бұрын
I route the cable in front of the airbag on purpose because if I crash my car, I deserve to get a mouthful of USB cable.
@AlexAutoFunКүн бұрын
LOL!! 😂
@justinv69542 күн бұрын
Hey man . I have this camera as well but I’m a bit confused, Does it record the whole duration of the drive? And let’s say I want to clip a certain part of the drive . How do I do this?
@AlexAutoFun2 күн бұрын
Hi! Correct, it uses loop recording to record your drive. Here is my full review for it so you can see how it works kzbin.info/www/bejne/oqjShJWfrM-Gn80 Cheers!
@digitalbilly2 күн бұрын
Thinkcar 689BT Lost Features After Update (v1.0.8.3) - Disable Auto Updates! I bought the Thinkcar 689BT with all the accessories because they worked perfectly together. But after updating to v1.0.8.3, key features were removed. Features that are no longer available: TPMS Printer Oscilloscope Endoscope Battery Tester Voltage monitoring was added, but it came at the cost of important tools. To avoid losing features, turn off auto updates. I contacted Thinkcar with my serial number, and they manually restored my missing modules. However, there is still a bug-oscilloscope appears twice under modules. Another issue is that the scanner no longer reads DPF pressure (in/out) and only displays an estimated soot weight. This makes diagnosing DPF problems much harder. Thinkcar should be adding features, not removing them. If you have noticed missing features after the update, share your experience in the comments.
@mGsr-pr6hh2 күн бұрын
I saw your mustache and thought this was a skit at 1st 😅
@AlexAutoFun2 күн бұрын
LOL!
@rocketboyz10042 күн бұрын
Mine just came in yesterday. Im gonna try it today! Thanks for your video!❤
@AlexAutoFun2 күн бұрын
You're welcome and congrats on your new smoke machine!
@rocketboyz10042 күн бұрын
@AlexAutoFun thanks man god bless!!!
@kqv56912 күн бұрын
Hey, I want to get it for my first and brand-new car🎉. Do you think, overall, it's a good option in the dashcam market for that premium price?
@AlexAutoFun2 күн бұрын
Hi! Yes I think the F4 is a good dash cam, I would recommend that you compare the features and video quality of the dash cams your are considering (since dash cams have different features). If you only need 1 channel, take a look at my channel in the playlist "Single Channel Dash Cams" so you can compare them, Cheers!
@billlawson1533 күн бұрын
How do I find the radio ID? Radio tuner won't go "0".
@bravomikesierra3 күн бұрын
So there is no updates for it or are the updates for free?
@AlexAutoFun2 күн бұрын
Hi! As shown in the video, updates are included for free, Cheers!
@Not-just-doing-I.T.3 күн бұрын
Excellent video, great detail
@AlexAutoFun2 күн бұрын
Thank you!
@QuietCacophony3 күн бұрын
I wish it would fit with the cable attached. I don't want to be connecting and disconnecting the cable every time.
@AlexAutoFun2 күн бұрын
100% agree, I don't why manufacturers keep doing that, I understand for shipping the cable can be disconnected but once it's here, I also don't like disconnecting the cable every time I want to store it ugh, will mention this on next review for scanners with this issue, good point, Cheers!
@stephenprice75023 күн бұрын
Do you know if it can do Proxi Alignment on Fiat, Alfa Romeo and Chrysler?
@AlexAutoFun2 күн бұрын
Hi! Yes the scanner does support aces to the BCM and associated modules, just remember that actually being able to activate, program or enable a specific component varies from vehicle to vehicle. Thinkcar does accepts VIN numbers if you want them to check if it will be able to access the specific function you need, Cheers!
@stephenprice75022 күн бұрын
@@AlexAutoFun I just need to do Proxi Alignment so that it's no longer expecting to see the problematic Blue&Me module. This car has a flashing odometer after removing the module from the system.
@terencerodrigues60183 күн бұрын
Hello Alex, i have also installed an Akeeyo V720S in my car. But somehow afraid to use the hardwire kit in the fuse box. My question is, is there an OBD 2 cable that can be used to connect this Akeeyo V720S rather than the fuse box?
@AlexAutoFun2 күн бұрын
Hi! Nope, the V720S has a proprietary power connector as shown in my full review for it here kzbin.info/www/bejne/pWnFlpqZorV0aNk so unfortunately it's not compatible with an OBD2 power adapter, Cheers!
@AlistairEwingforensic-services3 күн бұрын
You may as well clean the MAF in isopropanol alcohol while it is off for more accurate readings... Leave it in a sealy bag for a couple hors andnlet ut dry out. This may increase responsiveness and acceleration more than the pipe!
@AlexAutoFun2 күн бұрын
LOL! While I seen people use IPA to clean their MAF, I actually use MAF cleaner or the recommend OEM cleaner called out by the service manual, Cheers!
@IvanRosaT3 күн бұрын
I noticed you put a 15a on the 2a , is doable to have different inputs of power?
@AlexAutoFun3 күн бұрын
Hi! Ah remember a fuse tap creates 2 separate independent circuits (each one with a different amp rating partially determined by fuses that are loaded into the each fuse slot in the fuse tap, the vehicle's internal wiring and current load on the circuit being tapped as determined by your installer) The fuse removed from the vehicle goes in the fuse tap bottom slot and the second fuse (top fuse) is for the hardwire kit. So they are each independent of each other, each one driving it's own load. Here is another video kzbin.info/www/bejne/h6vaaqyLjrNqsNE where I explain how fuse taps work in more detail, Cheers!
@francischiew70803 күн бұрын
the moment I heard "double sided tape" get a thumb down from me !
@AlexAutoFun3 күн бұрын
Hi! VHB has extremely high adhesive properties and is used extensively in the car industry to secure body panels and trim (I have even seen cases where paint was removed when attempting to pull VHB tape incorrectly, that's how aggressively strong this tape can be). However here is a good alternative if you prefer suction cup mount kzbin.info/www/bejne/sHqogaGAgrB2oLM Cheers!
@TurnThemWheels3 күн бұрын
Looks like a great unit. I picked up the MK900 and will produce video soon
@SoniaTyler-x9v3 күн бұрын
My Redtiger screen is not working anymore and I just had it for 2 months. How can i fix it.
@AlexAutoFun3 күн бұрын
Hi! Oh no, since you only had it for 2 months it's should be under warranty still, I would recommend contacting RedTiger for tech support, Cheers!
@SoniaTyler-x9v3 күн бұрын
Ok. I will. thanks
@Jayledez3 күн бұрын
Mine does not record my speed any tips ?
@AlexAutoFun3 күн бұрын
Hi! You need to turn on the Speed Stamp, here is my video showing how to turn that function on kzbin.info/www/bejne/gWjUhoV6m9SFbcU Cheers!
@Jayledez3 күн бұрын
@AlexAutoFun youre awesome thank you!
@AlexAutoFun3 күн бұрын
@ You're welcome!
@bitizieharoldjoelgami8533 күн бұрын
Thank you very much. Is it a good alternative to the S3000 or there are big diference in term of capacities? Thank you
@AlexAutoFun3 күн бұрын
You're welcome! Ah unfortunately I have not tested the S3000 so I can't comment on it's performance or how it compares to the S300. I will see if we can add it to the list of to review, Stay tuned, Cheers!
@MOHAMMADTAHIR-r5j3 күн бұрын
Where you located ? I want to come for installation
@AlexAutoFun2 күн бұрын
Hi! I currently do not offer installation services but if something changes in the future I will let you know, Cheers!
@bricohd37723 күн бұрын
Hi mustache! What are these black cables called? 5:43
@AlexAutoFun3 күн бұрын
Hi! Those are the cable that are part of the lighting kit, here is my full review so you can see how the kit works kzbin.info/www/bejne/rIiuoH2EaJ1giNE Cheers!
@roslynspeller65373 күн бұрын
You are a great presenter. I will look for more of your videos because I am extremely tech challenged. Thank you very much.
@AlexAutoFun3 күн бұрын
You'ew welcome!
@Andrew-sx7ct4 күн бұрын
Do you have an adapter kit for Toyota Land Cruiser 200 series VX (2021 model)?
@AlexAutoFun3 күн бұрын
Hi! You can see illustrations of what the adapters look like at the 6:42 mark and what they look like in real life at the 7:52 mark. Their appearance is very distinct from each other. While it may be possible to identify the mounting tab by just looking thru the windshield (from the outside) I prefer to remove the the OEM mirror to double check if the mounting tab is a standard one or a specialty one (by comparing it to the examples show on this video) Cheers!
@deputy24214 күн бұрын
Auto mechanic did my hardwire connection but whenever I turn off the ignition the camera turning off too. So I can t use parking mode I don t know what's wrong can I show you photos?
@AlexAutoFun3 күн бұрын
Hi! When correctly hardwired the dash cam will turn off and enter park mode (if enabled in the dash cam's setting) when the car is off. I would have the installer check all the connections (ACC, BATT & GND) to confirm that they connected to the correct locations for ACC and BATT (I seen cases where ACC and BATT are reversed or connected to the incorrect locations that does not provide power at the correct time for both ACC and BATT) Here is my follow up detailed hardwire install if you want to see that process kzbin.info/www/bejne/gWPMfIugbZdma5Y Cheers!
@deputy24213 күн бұрын
@AlexAutoFun thanks but I Don t know anything about the auto electronic 😔
@elpeka13304 күн бұрын
Mustache wax 💨🤜🏼 is solid!
@AlexAutoFun4 күн бұрын
@@elpeka1330 Thanks man!
@marshabrown60204 күн бұрын
ACC OFF came on my screen, how should I proceed
@AlexAutoFun3 күн бұрын
Hi! Sounds like the dash cam is about to enter park mode. When correctly hardwired the dash cam will turn off and enter park mode (if enabled in the dash cam's setting) when the car is off. I would have the installer check all the connections (ACC, BATT & GND) to confirm that they connected to the correct locations for ACC and BATT (I seen cases where the ACC and BATT are reversed or connected to the incorrect locations that does not provide power at the correct time for both ACC and BATT) Here is my follow up detailed hardwire install if you want to see that process kzbin.info/www/bejne/gWPMfIugbZdma5Y Cheers!
@richarde92464 күн бұрын
Thanks for the heads up 😊
@AlexAutoFun4 күн бұрын
You're welcome!
@AsandaN_sunsista5 күн бұрын
Can I vlog with it?
@wildian305 күн бұрын
My F17 doesn't turn off when the car off, its stays on all the time. Is that normal for F17?
@AlexAutoFun4 күн бұрын
Hi! If your cigarette lighter port turns off and on when you turn on and off you car, then the dash cam will come on and off with the car (to avoid draining you car battery). But if your plug is always on even when the car is off, I use one of this ones amzn.to/3BofzJI to control the lighter port manually and ensure the dash cam turns off and not drain the car's battery, Cheers!
@WowRixter5 күн бұрын
My confidence level is increasing with watching each of your videos
@johnnytrafficjam7245 күн бұрын
I went to someone to hard wire My can but I’m not able to connect to app… did they debit up wrong
@xcompa77x5 күн бұрын
Just bought this thing today, glad to report that they now include a storage case and a manual in the box. Innova must have watched your video lol
@charlessandoval83055 күн бұрын
What if the piston falls out, does it need to be bled then?
@AlexAutoFun5 күн бұрын
Hi! Yes, the system must be bleed if it has been opened, here is my video for that kzbin.info/www/bejne/eJ3cmKFqac93otE Cheers!
@charlessandoval83055 күн бұрын
@@AlexAutoFunthank you so much
@AlexAutoFun4 күн бұрын
@@charlessandoval8305 You're welcome!
@charlessandoval83055 күн бұрын
Do you install new pivot without the cup from old one?
@AlexAutoFun5 күн бұрын
Hi! Yes, as shown in the video, the DCR required the OEM cup to be removed, Cheers!
@charlessandoval83055 күн бұрын
@@AlexAutoFunThanks for the responce Alex. What if installed the new rod with the cup.
@charlessandoval83055 күн бұрын
@@AlexAutoFunI glued black cup to new rod since new rod doesnt clip in like oem one.. do i need to remove the cup ?