9 ай бұрын
10 ай бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@7894561230daniel 12 сағат бұрын
My ps3 is jailbroken.. do I need to do something different or just follow the same instructions?
@karuanmax7821 13 сағат бұрын
What is the region code of tha ps3 ??
@11tmaste 2 күн бұрын
Would you be able to make this work with a PC as well? How would you do it if so?
@Slot1Gamer 22 сағат бұрын
@@11tmaste yes you can, the setup is the same just connect power to 5V from a HDD power connector You can buy cheap splitter cables and cut them up Red wire is 5v usually
@rodger603 2 күн бұрын
I bought one from seek thermal for my phone. It did not work, and they had me send it back, and they sent me a new one. The new one didn't work either, and Even though they sent me a new one they told me that it was too late to return it and I was stuck with it. My wife got me one from hikmicro, the mini2 plus. It's amazing! It was cheaper as well. Seek is a pretty shady company. I'm not trying to bash them but stating my experience. I wouldn't go with seek.
@אושראלימלך-ס5ב 4 күн бұрын
"When ordering the PCB, choose 1.6mm thickness, FR4, 2 layers, HASL, 10z Cu" are you sure it's not 1oz because 10oz is very expensive
@Slot1Gamer 4 күн бұрын
Oh yeah sorry haha
@ychongy 7 күн бұрын
I use the xh09 for squirrel hunting. Under 70 yards. Theres a bunch of times where its too zoomed in that I cant even tell which tree the squirrel is located at. Especially when theres alot of brushes and small trees in the way. Do you think the p2 pro with a wider field of view would work better for squirrel, ratting or even white tail deer hunting usually around 100 yards and below? Or do you think the xh09 is fine?
@lucasm696 9 күн бұрын
I tried many methods, and this realy works. Thank you from Brazil
@michaelbuchanan-fu2tg 13 күн бұрын
I got a controller that doesn’t turn on I just bought a thermal imaging camera. I’m gonna see if my capacitor is heating up in my controller.
@Xerkies 15 күн бұрын
idk where to send my log but here is mine if any want to look: ofst[ 4]:err_code:0xffffffff, clock:0x15ebac29 2011/08/27 13:22:49 ofst[ 8]:err_code:0xa0801001, clock:0x167d7a9c 2011/12/16 03:42:20 ofst[ 12]:err_code:0xa0801001, clock:0x17f00ae2 2012/09/22 05:36:34 ofst[ 16]:err_code:0xa0801001, clock:0x1e542283 2016/02/15 05:45:39 ofst[ 20]:err_code:0xa0801001, clock:0x21882561 2017/10/29 05:36:33 ofst[ 24]:err_code:0xa0801004, clock:0x2188256c 2017/10/29 05:36:44 ofst[ 28]:err_code:0xa0902203, clock:0x2188256c 2017/10/29 05:36:44 ofst[ 32]:err_code:0xa0902203, clock:0x2188256c 2017/10/29 05:36:44 ofst[ 36]:err_code:0xa0902203, clock:0x2188256c 2017/10/29 05:36:44 ofst[ 40]:err_code:0xa0801001, clock:0x21889a67 2017/10/29 13:55:51 ofst[ 44]:err_code:0xa0801001, clock:0x218a5940 2017/10/30 21:42:24 ofst[ 48]:err_code:0xa0801001, clock:0x22321d2a 2018/03/07 03:46:50 ofst[ 52]:err_code:0xa0801001, clock:0x22321d5a 2018/03/07 03:47:38 ofst[ 56]:err_code:0xa0801002, clock:0x2d4e24a6 2024/02/01 09:45:10 ofst[ 60]:err_code:0xa0801002, clock:0x2d4e24be 2024/02/01 09:45:34 ofst[ 64]:err_code:0xa0801002, clock:0x2d4e24fb 2024/02/01 09:46:35 ofst[ 68]:err_code:0xa0801002, clock:0x2d4e25a7 2024/02/01 09:49:27 ofst[ 72]:err_code:0xa0801002, clock:0x2d4e2619 2024/02/01 09:51:21 ofst[ 76]:err_code:0xa0801002, clock:0x2d4e5a01 2024/02/01 13:32:49 ofst[ 80]:err_code:0xa0801002, clock:0x2d4f3198 2024/02/02 04:52:40 ofst[ 84]:err_code:0xa0801002, clock:0x2d4f31be 2024/02/02 04:53:18 ofst[ 88]:err_code:0xa0801002, clock:0x2d4f3218 2024/02/02 04:54:48 ofst[ 92]:err_code:0xa0801002, clock:0x2d4f327b 2024/02/02 04:56:27 ofst[ 96]:err_code:0xa0801002, clock:0x2d4f3301 2024/02/02 04:58:41 ofst[100]:err_code:0xa0801002, clock:0x2d4f330c 2024/02/02 04:58:52 ofst[104]:err_code:0xa0801002, clock:0x2d4f33d5 2024/02/02 05:02:13 ofst[108]:err_code:0xa0801002, clock:0x2d4f3429 2024/02/02 05:03:37 ofst[112]:err_code:0xa0801002, clock:0x2d4f3449 2024/02/02 05:04:09 ofst[116]:err_code:0xa0801002, clock:0x2d4f35f2 2024/02/02 05:11:14 ofst[120]:err_code:0xa0801002, clock:0x2d5e03da 2024/02/13 10:41:30 ofst[124]:err_code:0xa0801002, clock:0x2d5e0513 2024/02/13 10:46:43 ofst[ 0]:err_code:0xa0801002, clock:0x2d5e0521 2024/02/13 10:46:57 2024 is when i got my ps3 from my dad's friend. According to the wiki the 1001 shouldn't automatically be a concern, it just means it was powered off unexpectedly. (ex. power outage or not powered off gracefully). You can see I get a new set off errors when i started using it recently. There are the 1002 errors which to the wiki, means fauly nek tokins. Was hoping it be something easier lol. oh well. Oh and also here is my becount: Bringup : 5026 times Shutdown: 4407 times Power-on: 599day 10hour 42min 45sec Previous owner used this console a lot!
@ChaseFire1934 15 күн бұрын
Wait, I think u sold this to me
@Brian-ausie 20 күн бұрын
Great video, I have just done my modbo 5 and your tutorial was a life saver, but my DVD won't boot on auto or when DVD is selected in the boot, the screen says no data, is it possible the laser lens is dirty? It did work prior to the mod, or maybe the cable is not connected properly?what screen msg do you get if the laser lens is dirty?
@Slot1Gamer 18 күн бұрын
From memory PAL units require H point be connected I’d double check the install When it says no data, is that a message from the chip or is it in the PS2 browser when you go to the disc and memory card area
@Brian-ausie 18 күн бұрын
Thanks for your help, it was a bad connection on the ribbon cable to the laser, all working, I am pleased my first attempt of modbo5 worked, I had to use strong magnifiers, if anyone is attempting the mod double check for debris
@henrikloiske8572 21 күн бұрын
Considering that Louis Rossman, Northridgefix and Sorin uses this machine, it is definetly the best choice
@Taha.bateman 22 күн бұрын
W
@dogfortgaming3183 22 күн бұрын
I have wanted one for years, is it true that with a dead hard drive you can still play games with freemcboot?
@Slot1Gamer 21 күн бұрын
yes to a degree you still can, however at that point its better to modify a standard ps2
@Camell513 24 күн бұрын
Fantastic review. So much detail in this, expected some basic review but pleasantly surprised with how much extra stuff you checked like the solder joints on the actual pcbs of the units!
@ashjagemiah750 26 күн бұрын
Great video as always.
@elmariachi5133 27 күн бұрын
With more than 60 degrees C it's already possible to warp some kinds of plastic.
@Slot1Gamer 27 күн бұрын
That’s true especially if they are under tension This snes shell is pretty thick and just free floating so it was ok
@Pmp174 27 күн бұрын
Where did you get that shell for the ps2?
@Slot1Gamer 27 күн бұрын
Its stock like this, I have another video restoring it if you want to see
@appalights 28 күн бұрын
this is still so useful a decade later, thank you so much
@connorhunter9394 28 күн бұрын
The cold side was still around 20s does it not get colder ?
@Slot1Gamer 27 күн бұрын
It can go down to 8c but laying on it that cold can be uncomfortable
@spark9_ Ай бұрын
Thanks, burnt-sushi didn't have run instructions in github so this was super simple and clearly explained.
@Slot1Gamer Ай бұрын
Glad it helped!
@walterwallace9503 Ай бұрын
When I run the script it gives error python310.dll "LoadLibrary: Pylnstalier: FornatMessageW failed" 😢
@Slot1Gamer Ай бұрын
Did you install python In the installer also click add to path
@walterwallace9503 Ай бұрын
@Slot1Gamer I discovered the problem! the minimum version of Python that the script required was 3.10. I was using Windows 7 where the last version released was 3.7, so it gave me an error.
@ahmet_ygt Ай бұрын
Modbo 1.82 nasıl olcak
@Slot1Gamer Ай бұрын
When you are in the menu it should be the same options
@TwistedMe13 Ай бұрын
Modder's Maxim #1: "When in doubt, break out the Kapton Tape (or Solder Mask and a UV light)". That said always replace the old power supply of retro consoles. (Especially if they have electrolytic caps.)
@EverSoJoe Ай бұрын
Picket the HT-203U up for 130€ Looking at the specs it's probably the same internals
@Slot1Gamer Ай бұрын
I’ll take a look, thanks :) I think HT and UniT share the same ODM too
@roberthollars462 Ай бұрын
$250 on Amazon though
@Slot1Gamer Ай бұрын
There is a $50 coupon on Amazon US
@MrSilkT Ай бұрын
All chinese USB thermal cameras are the same 256 x 192 @25Hz camera. So I don't think that this one, while using the same internals as dozens of it's 'competitors', can be a game changer.
@knoopx Ай бұрын
and is neither "affordable"
@MrSilkT Ай бұрын
@@knoopx relatively to other, especially US made, thermal imagers, it very well may be called affordable. Not cheap, but we don't have enough competition in the space unfortunately.
@Slot1Gamer Ай бұрын
Looks like infiray and extension TM are the source of these modules, they do ODM supply also I believe.
@gavinhausermann4464 Ай бұрын
The fix is called “Gorilla Glue” boom problem solved!
@RedjinaldBrennan Ай бұрын
Great video! 😜I especially loved the shot where the P2 was surrounded by coins-it looked so cool and tiny. As you mentioned, the focus feature is crucial for detailed inspections. By the way, does Seek have a focus feature?
@Mesiya-h7o Ай бұрын
This thing’s a total game-changer! Way sharper than my old FLIR ONE PRO, and the X³ feature? Pure magic. Perfect for spotting insulation leaks and checking pipes. Highly recommend-worth every penny!🔥🔥🔥
@paszTube Ай бұрын
Interesting method! Would you say you have to this outside or in a well ventilated room, as the possibly the vapors are toxic? Also, does UV light also play a role here?
@Slot1Gamer Ай бұрын
The UV + IR from the sun helps but you can just do this cold inside, it just takes longer (maybe better for gradual whitening)
@JOELY79 Ай бұрын
Does anyone know if an AV to HDMI cable would work with this I already have my AV ports on my TV being used ?? Don't want to keep swapping them out or have to use a switcher
@Slot1Gamer Ай бұрын
It should work fine, the CVBS impedance should be within spec I’d recommend getting a GBSC, they are under $100 usd and seem to be more tolerant in this regard. They also don’t have a frame buffer from memory so little to no lag
@Matthew2291 Ай бұрын
Hi, I have a fat 80gb CECHL04 with ylod...which syscon program should I use?
@ttv_eruptour822 Ай бұрын
go to the time 2:47 i was looking for the same thing
@Matthew2291 Ай бұрын
@ Thanks!
@samiboypicco9885 Ай бұрын
can you recomend good soldering station?
@Slot1Gamer Ай бұрын
I’ll be brining out a video of a new good combo station soon
@linkage8700 Ай бұрын
This is a great video, and I don’t think you’re criticizing anyone but rather sharing an important safety reminder. These older consoles, specifically the PS2 fat models, have an open PSU with large capacitors exposed. I’ve taken high-level physics and circuits courses, where we worked with large capacitors, and I remember my physics teacher showing us images of electrical shocks and burns before starting certain labs. We were trained on how to discharge a capacitor’s stored voltage safely. I believe most people, especially PC users, understand that a PSU can be dangerous. However, I think some may not realize that certain components, like capacitors, don’t need to be plugged into an active power source to shock you. Simply touching one of these capacitors while another part of your body is in contact with a grounded metal surface is enough to complete a circuit-and trust me, that can deliver quite a shock. I’d really like to try this mod, but I’d probably add extra safety measures to prevent the IC or any wires from falling into the PSU. If any of this sounds alarming, it should be, but it’s all about having the foresight to understand what you’re working with. I also want to mention that, while I haven’t found any documented cases of someone being killed by a PS2 PSU shock, there are occasional reports of minor shocks, though they’re rare. That being said, this video still provides valuable caution. Any added components that come loose could increase the likelihood of electric shock or damage, so this kind of advice is important. I'm up late tonight, drinking way too much coffee, doing some astrophotography, and working on a PS2 for my nephew's birthday and Christmas present. I came across your video and, although I'll probably use this product, it will be on my PS2, not my nephew's. I'm heading to bed now; the sky tonight was disappointing. Anyway, clear skies and happy trails.
@Slot1Gamer Ай бұрын
Yeah I think with some minor modifications it can be made safe, crazy that it’s not implemented from the start
@paduutoxic1631 Ай бұрын
I read tday my eeprom thanks man great vid
@malas_layan Ай бұрын
Do you know how to replace hdd and OS?
@semod8614 2 ай бұрын
Are there any combo soldering and hot air stations as good as this (with either T12 or JBC style tips comparability on the iron side). Or is it better to buy dedicated machines?
@Slot1Gamer Ай бұрын
@@semod8614 wep soldering now sell one that’s JBC iron compatible with this same type of hot air system It’s called 992D III 2 in 1
@MuellerMarco 2 ай бұрын
Is ponyprog working with win 10 32 bit? Thanks great video
@Slot1Gamer 2 ай бұрын
it should work, if not try compatibility mode
@redxmemes 2 ай бұрын
good work
@santinobardz7398 2 ай бұрын
I still have this kind of VCD the sony bootleg VCD and use it on my daily mp3 stuff. Sound quality for mp3 is superb on that player
@Slot1Gamer 21 күн бұрын
very interesting, does it work well with high bitrate mp3s?
@santinobardz7398 20 күн бұрын
@@Slot1Gamer yes max 320 best player for mp3 cds
@karolotuszewski8417 2 ай бұрын
Have you ever tried to run og Xbox games on it? It should support it, but I can’t run any on my wasabi. It reads it as video dvd and says something like “this is an Xbox game disc. Put it in Xbox to start playing”
@Slot1Gamer Ай бұрын
No I haven’t but maybe you need to have them in a larger image like a 360 iso but I’m not sure (On certain kreon CFW pc drives, original Xbox discs can be ripped as 8gb images) Also it may be dependant on the wasabi firmware, mine is still on the original
@sarahportelli9409 2 ай бұрын
THANKS SO much for making this video! I'm so happy we have an alternative here in AUS where you cant buy chilli sleep and the sleep 8 costs a small fortune. Bought this thanks to you - and love it.
@Slot1Gamer 21 күн бұрын
You are welcome, glad I could help.
@duka9x878 2 ай бұрын
It always says Auth1 response invalid.... :( No matter the orientation of the RX and TX cables. I use a TTL to USB C from the Arduino box. That should work too, wouldnt it?
@yuongluka 9 күн бұрын
i have the same problem :(
@duka9x878 9 күн бұрын
@@yuongluka I couldn't get it to work and eventually gave up
@giorgesuarez5807 2 ай бұрын
What about error A0093004 on a slim 20xx
@Islamisthecultofsin 29 күн бұрын
Google " PS3 SYSCON Error Code 3004" Has lots of Info. Small sample: "This error is linked to inadequate filtering on the RSX_VDDC power line. A certain range of voltage ripple and noise can trigger this error before it becomes severe enough to cause an RSX_VDDC Power Failure (3004)."
@giorgesuarez5807 29 күн бұрын
@@Islamisthecultofsin so this would most likely be a nec/tokin or power supply problem right?
@Islamisthecultofsin 29 күн бұрын
@@giorgesuarez5807 Master Yuri95 gave this reply for the 3004 error: "theres a failed component along the power VRM".
@Islamisthecultofsin 29 күн бұрын
@@giorgesuarez5807 Salm-O-Nella • 1y ago • I have the same problem on COK-002 Board, i've tried to replace Q6001 and Q6002 Mosfets, IC6002 and IC6003 Voltage Regulators, and IC6201 Cpu Power Processor without success. Obviously i replaced NEC-TOKIN with 470uF Tantalum Caps, 4 for each NEC-TOKIN, and done the bridge with 2.5mm^2. All voltages and enable signals are ok, resistance between caps and gnd is 3.5ohms, so that's also ok. Tomorrow i will try to replace IC6200..
@Islamisthecultofsin 29 күн бұрын
@@giorgesuarez5807 olongrieving OP • 2y ago • omg never mind! i did some basic tracing from the fuse through the vias and found another shorted capacitor as shown in the first link (pic from the donor board). YLOD IS GONE. my first time. hurrah. newish to electronics repair so this is a pretty big ass dopamine hit. who knows if the console is stable but i'll take the win.
@northparkfilms3045 2 ай бұрын
How do you get the screen to show your f stop, shutter speed and shooting details. Seems it only shows my frame rate and battery life
@MasonTech_ 2 ай бұрын
thank you sm
@Pseudometrik 2 ай бұрын
hi can you install other apps? like word or something?
@Slot1Gamer 2 ай бұрын
If you can find a winCE compatible version Once you are out of the kiosk app (the Japanese front end) you can run most things but being windowsCE some dependencies aren’t there like direct x
@SaintGold 2 ай бұрын
I followed all the steps for my VER.001 ps3 but when I connect the syscon to the pc and click "Auth" it shows the error that you mentioned in the video. I tried swapping the cables but nothing changes. I tried downgrading python to 3.10 (as this program seems to work on that version of Python), but it didn't help. I also tried using another pc with windows 10 this time (instead of 11), but I get the same error. I've been troubleshooting for an entire day at this point but I'm unable to find a fix.....do you have any idea what the problem could be?
@Slot1Gamer 2 ай бұрын
Is the uart adapter showing in device manager correctly, sometimes windows installs the wrong driver. It may be showing as libusb or something, manually change the driver by going update (right click on the device > “let me choose” > then manually select a different driver from the list Also if you are using bread board jumpers, sometimes the wires aren’t crimped and have no connection inside (this happened to me yesterday) Also confirm ground is connected When installing python ensure add to path check box is selected
@SaintGold 2 ай бұрын
@@Slot1Gamer I manually checked continuity between the cables and the motherboard but the device was indeed being shown as an "unrecognized device", so it must have been the drivers not being installed correctly. I somehow still managed to make it work via the cmd version and I got 1002 and 2114 errors, so my NEC/TOKINs must be broken..... It's a shame because that was my uncle's PS3 and he gifted it to me in 2015....I have so many memories of me and him playing Gran Turismo and GTA IV but the fix is not worth it imo; I'll probably get a used PS3 slim but I'll lose all my data that was on the old hdd. Thanks for the help anyway, it could be helpful in a future troubleshoot 😁
@Tushar9491 2 ай бұрын
Thank you for this! I just need to learn soldering and ill fix my 40gig non BC phat PS3!