ToneX One pedal is even better. Way smaller, way cheaper and does the same exact thing and free downloads and I.R’s etc.

Anyone use the ToneX One pedal with ME90? I love my ME90 for the most part but the pre-Amos need some help sometimes.

is tonex one enough for this ? or is it way worse

Thanx, I was hoping to find a chanell that involved the Pod Express. Are you going to produce any more Vids? I really learn more quickly if I can see it done. If not, thanx for what you have given... Happy Thanksgiving...Beware of the tryptophan...

It's a digital device. I'd say that, if the maker put an Trim In right there, there must be a good reason for it.

At first I use the pickup of the hum bucker. I love a sound of the metal of the heavy amplifier very much. I changed for an always dirty sound to listen to the best sound when I made sounds by software when I put preset in TONEX pedal, and I thought, but the cause did not understand that it was strange at all so far. However, on investigation I arrived at your video deeply. It was caused by Level setting of TRIM. You should write it at such an important thing, the first beginning of the manual! Thank you for a splendid video. From Japan.

Thanks for the very helpful and detailed video!

Just found this, subbed and liked! Pedal definitely has a learning curve and the manual is convoluted, making it difficult to even get started, let alone optimise it for peak performance. Thanks for posting this as I’m sure it will help other noobs like myself who are technically challenged!

I remember the days when effects pedals would have a couple maybe three knobs for knobs and that’s it no it’s gotta be Bluetooth and everything and I’m all for that I’m all in advancing with technologies and I do it but I don’t want everything I have to be control through my phone or an iPad so I’m looking for old school with new sounds

I've only ever used individual pedals, and i was interested in a multi-effects, and now i am more confused going out that i was going in. I did love your demo though. I am a simpleton and want plug and play multi-effects and controls i can understand

Perez Gary Harris Sarah Hall Mary

By far the best tutorial about me90 so far!

Might be a dumb question, but why do you have to 2 jacks cable in the outputs? is it a y - cable?

You said you can shift the effects loop from pre to post but never said how... Why is this information impossible to find?!

M a new beginner - this is too much for me to understand. 😂 I am gonna go slow with pedals

Can you play some backtracks from your phone to play along while using headphones ?

this is completely wrong

Thank you for these clear and detailed explanations.👍

If you wanna have physical music stores in the near future, stop giving Amazon free plugs. The more you buy from Amazon the fewer music stores there will be (period)

@1:00 I am still trying to figure out the meaning of these "limitations."

The drums are insane

Very cool . ❤. I don't know how old this is, but good video. I really liked the recording you did. I am looking at this as well as the IR2 and the Tonex, etc, for something to use to go to FOH. Where I live in rural southern Indiana all the places and small clubs I would play at require no stage volume or very low stage volume so I need to figure this out. Sadly you can't get feedback and such like you could back in the day when I played in the 80s with roaring combos and stack amps. I might have to get a sustainer pickup as well. 😂. Best regards and thanks man. ❤

I haven't got a clue what youre talking about ?? you cycle through the whole ME-90, because you know exactly what it's about, but the people wanting to learn something about how it actually works.How to know simple stuff.. And to get started, nobody on KZbin does that.. they just ramble on, about a 1000 things in 15 minutes, so people are left clueless, or they switch off, It's a bit like me telling everybody how to build a house in 15 minutes.

Planning on getting the v240 for gigging and practice watching this video helped me to know what I should do

I like my nux mg30

Funny it’s easier to get to on the TomeX one

I've had my ToneX a few months now and didn't know about this. Thank you so much man!!

Stop smacking your damn lips

How are you doing? All good? :) I bought Tonex One and I'm not able to configure the pedal's global equalization to make a "Low Cut - High Cut" in the Frequency Range. To limit the speaker frequencies.. Could you help me? thanks 🤠

Worst tutorial I have ever seen. This guy is all over the place pushing buttons randomly. Yikes !

When I turn it on, it already has various pedals activated. Is there a way to turn it on and not have any of the pedals already activated? I had the ME-80 and when I turned that one on, everything was off by default. I like having a clean slate rather than having to turn off the pedals that I don't want to use every time I turn on the unit

Awesome! I just got my pedal and I’m setting it up, so glad I saw this before using it. Thanks!

If the unit can pickup the signal as LOW, OK and HIGH, I wonder it there could be an AUTO function in the future, keeping everything clean.

Helpful hint, keep your hand on the Output Level knob when you are cycling through the patches, if you hit one that uses the expression pedal the volume can go crazy in an instant, or keep the volume off when changing patches.

is it possible to control the tonex from the me 90, i mean, change preset on tonex while changing preset on the me 90?

Input trim should be a per preset option.

I have a question and I'm not sure if anyone can help me with this. While using the IR-2 pedal during a gig last night, it was working fine for a while. Then the light would flash on and off rapidly, and no sound was coming out. Disconnect the power back and forth until it would work, try that a couple times and I just ended up switching the pedal out with my distortion pedal.

Hello and ty for the walk through. Very helpful, the heavy metal sound on the diesel 421 you created is exactly the sound I'm looking for. However when I set my amp to those exact parameters it still doesn't sound like yours, I'm using the line 6 v60 and a schecter super shredder. Could you possibly post those parameters here as they are kind of hard to follow in the video and set on your app at the same time thank you in advance for any assistance

Great demo, but one suggestion. Slow down just a little bit. For a novice like myself it's difficult to keep up.

I just got one of these, and the first guitar I plugged in was a 7 string loaded with Seymour Duncan Mick Thompson Blackouts and I was wondering why it was sounding a bit crap. +8 and those pickups just doesn't work for anything. Thank you for the video!

the camera adapter says its for the Ipad pro. So this adapter does not work for a Non pro earlier Ipad ?

Thanks for the advice <then turns it to +15> 🎸🤘🎸🤘🎸🤘🎸

1:13 What's with all these review videos that put something else in the signal chain... I'm not interested in a "cheap" joyless OD pedal.

Great tutorial but how did you get the app in the first place? I'm on Mac and justt plain can't figure it out, there's not a word about it in the manual; thanks, peace out.

I purchased a matte black Schector c6 Deluxe & when I went to change the strings, I realized that the nut slot on the D string is to low! Where did u get a black tusk nut?

thanks for making a great video that's to the point and describes the content of the video in the title!

whats with all the ancillary knob tweaking during the playback? it did nothing besides confuse the viewer and it DOES nothing in reality. It looks like ur just turning knobs to look fancy and thats exactly what ur doing. Most demos i see of these ME units are done by people who seem to have NO idea how guitar effects, signal chain, and gain structure works.

mine always says low when using my gibson les paul. 😂

Whats an “IR”?

I just got this pedal yesterday and was confused by the clean tones being distorted., awesome. Thanks a ton