Thanks for the video, unfortunately that did not work for me. So I ended up installing 10.12.6 :(
@AintBigAintClever3 күн бұрын
Still running 10.11.6 here.
@boketto8883 күн бұрын
Excuse my ignorance but at the end why when you press the power button on the genius does it power off both jump packs?
@AintBigAintClever3 күн бұрын
Towards the end I've got one providing power to the other through the red and black cable. Also if my finger is on one pack, watch what my thumb is doing on the other.
@boketto8883 күн бұрын
Thanks for the reply. Oh to be fair I didn't have my glasses on but it's a lot clearer now haha @@AintBigAintClever
@devilsforkdigital14903 күн бұрын
Didn't work for me, in fact made the results even worse.
@AintBigAintClever3 күн бұрын
All part of Facebook's "if it works, hold my beer" design methodology. They can't stop pissing about with it. I just tested it with a random name and it worked, but apparently Facebook send different versions of code to different people (which wreaks havoc with development of Social Fixer for example). This is in Chrome though, not the bloated Facebook phone app.
@revensteed95396 күн бұрын
As kids we got about ten metres in and there was a dead sheep so we ran away 1989
@yajamalu4u18 күн бұрын
With a wire go to E1 and TF together with the ignition on ok let see if I can do this and find it as an old lady here. I just got his car as a gift paid around $600 with DMV and insurance. I was given to save money 🤑. Yeap it was raining and it came on with check engine light too gosh. Can I return the plates and cancel all and get my money back with the DMV and insurance?
@mdashikhossain534818 күн бұрын
Thank you so much ❤
@akceoglu854519 күн бұрын
İlk Çıktığı yıllarda kullanma şansım olmuştu , muhtemelen özelliklerini ayarlayamadınız NV-GS400 Bu kadar kötü bir kamera değildi
@user-vw9mb4tv9k20 күн бұрын
Pretty cool if that was legit. But it didn't teach us anything.
@AintBigAintClever20 күн бұрын
Of all the comments that made no sense, yours didn't make sense the most.
@user-vw9mb4tv9k17 күн бұрын
@@AintBigAintClever Cool, appreciate it!
@maudamon931121 күн бұрын
I converted mine to12v yo these battery's 9Ah x 8=96AH I'm not finishing the battery power
@Ghost-Of-Kyiv-Ай бұрын
Speedometer don't work
@AintBigAintClever29 күн бұрын
That'd be a completely different fault with a completely different solution.
@Ghost-Of-Kyiv-29 күн бұрын
@AintBigAintClever ill try this first thank u.
@a64738Ай бұрын
My Noco GB70 have never worked, just runs the light and make the click click click sound. In the 5+ years I have had it and 20 - 30 start tries it has never started anything at all...
@gallogodinez9859Ай бұрын
My damn 04 gs430 has a different drivers door from a 99 so I don’t think I’m ever getting my moneys worth thst I spent on a key with buttons
@teddybesplitinlanes5500Ай бұрын
I replaced my alternator and it went away
@teddybesplitinlanes550016 күн бұрын
Battery also at the same time so just make sure the ecu cant get any power for while and it will reset
@liamgrant4716Ай бұрын
Holy shit thank you so much. After removing the lance, shaking the washer around trying to clear the airlock. This is what worked!!!
@UOTQAUIBOАй бұрын
Bro this shit stopped working for two years until I found this video 💀💀 I got tired of not being able to use this old laptop so I’m super glad I stopped being lazy and did this. You’re the GOAT 🙌🏻
@GasBrakeSimАй бұрын
Appreciate the help brother ! Cheers 🍻!
@EphemeralProductionsАй бұрын
You did this past 1 am? You must have very patient neighbors. lol
@coondogthemanАй бұрын
Where did you get that? Did you get enough subscribers to have KZbin send it to you or did you buy it somewhere? if you bought it I'd like to know where because I want one.
@AintBigAintCleverАй бұрын
I got an email from KZbin in May, inviting me to sign up at the Rewards Hub (with a unique code, so it looks like it's invite-only). I signed up a few hours later and this limited edition light was on there as a free gift. I went for it, it arrived a few days ago. I expect some will find their way onto eBay soon enough.
@coondogthemanАй бұрын
@@AintBigAintClever I'm just worried about scams. I won a CO2 powered salt gun from that company that makes those salt guns you shoot flies with and I was skeptical until they messaged me on FB messenger saying I won their caption contest so I gave them an address and they sent it out. Got it a few days later but haven't tried it yet, not enough bugs to shoot.
@BrainPlasmaАй бұрын
Just got an 06 Honda CR-V that has one on it. Looks like a dealer addon. I'm thinking I can just disconnect the battery terminal wire to stop the drain without harming the car. Thoughts?
@AintBigAintCleverАй бұрын
Yeah. Insulate and tape-up the connection so it can't touch the bodywork.
@BrainPlasmaАй бұрын
@@AintBigAintClever Was able just to unplug it from the primary module. all LEDS went out. No tools. No more battery drain. Easy peasy.
@VolkGamАй бұрын
👍 Is it IBM-compatible (Apple II)? Are games played on it? Run a couple of games on it. Are there color modes? Is it possible to change the video card on it to a better one?
@AintBigAintCleverАй бұрын
glasstty.com/category/80-bus/
@Eduardo_EspinozaАй бұрын
That touch dim feature is pretty smart like apple's ring control. :)
@StubbyPhillipsАй бұрын
So they can just get away with calling a plastic tube full of LEDs "neon" now? That's just _wrong_ but I guess nobody cares? It's neon-ish, neon adjacent, but it's _NOT_ neon so why call it neon? It has nothing at all to do with neon other than a vague resemblance. It's like neon with no "soul." I LOVE (real) neon and I think it's a shame for this imitation stuff to get away with hijacking the name. The phony neon stuff ("phoneon?") is indeed cool in it's own way. Sometimes it can even change color. It deserves its own name. But... I guess it's just another example of the _"bandwidth limited"_ way so many people engage with the world around them. It's "close enough" for them, you know, like homophones: "Meh... sounds the same so who cares witch [Sic] word you use."
@GameboygeniusАй бұрын
And this service is called You"Tube" despite most of us watching it on flat screens with no vacuum inside. And we follow "channels" despite not tuning a circuit to a specific part of the electromagnetic spectrum before watching. And we "subscribe" despite not receiving a single item in the mail. And we "comment" without uttering a single word with our mouths.
@keepingup2952Ай бұрын
I don't know if I would immediately recognize it as a KZbin logo. It would have to be solid red, not like one of those bladeless dyson fans.
@AntonBabiyАй бұрын
Is it just me or everything past the 5:40 mark up to 13min just a blank video?
@klarusboyАй бұрын
yeah it is
@AintBigAintCleverАй бұрын
Oh FFS, it's rendered an entire bloody blank bit, I should've checked before uploading. I'll see if I can chop it.
@vitormuzzi313Ай бұрын
I spent one week trying to figure out the problem, updating drivers, it drove me nuts. The ForcedUSBMode worked for me. Thanks so much!
@rico2207Ай бұрын
Make a schematic
@graemeyetts3465Ай бұрын
The newer HC is all over the NV model. Far more natural colours and better light use, especially at twilight. Tech and values moved fast
@pilotusa2 ай бұрын
Thank you! Thank you! Thank you! As only a moderate-level user I had to watch this video about 7 or 8 times, going back over and over some portions, but I finally got it to work! I am using an 8 year old Macbook Air that works fine and I see little reason to upgrade as long as I can get done what I need to. I run OSX El Capitan 10.11.6 because that's all it will take. (I was told I could have a tech force a newer OS but that I might lose functionality. No thanks.) I just back this machine up and will upgrade when it gives up the ghost entirely.
@Vas12 ай бұрын
Thank you for this video! I have problems with my Wifi USB-Card from time to time. It works most of the time but if it doesn't, it keeps disconnecting every couple of seconds. I already downloaded a driver from the manufacturer's page (mine is from Maxesla), but that didn't seem to help. I tried reproducing the steps in regedit, but didn't have ForcedUSBMode or the following ones. After downloading the driver from the description, those entries are now there. If the new driver didn't fix the problem already, I know where to return to. :)
@islaam_isthewayof_life2 ай бұрын
Mines is smoking what should I do
@MrTravstyles2 ай бұрын
Does this work for 400’s too?
@AintBigAintClever2 ай бұрын
I'd expect it to work on any Toyota/Lexus vehicle of around the same age.
@diamondstar28972 ай бұрын
Not every clock looks like that bad. Here i have this which circuit is not same to you it has two circuit. 1 is on the top, and another is on back. But the body design is same to you
@KashifKhan-wn6tw2 ай бұрын
Very weak motor
@lucyhughes83882 ай бұрын
Mine connects to usb 3 but is still slow, the internet only works on a 2.4ghz connection too, if i connect the the 5ghz it connects with no internet, is this a driver issue?
@AintBigAintClever2 ай бұрын
That's an odd one. Does it connect properly at 5GHz if used at USB 2.0 speed? Worth trying different drivers, worth trying on a different computer if you can.
@SkeywR2 ай бұрын
Thank you so much for useful information :)
@velhoopastaa26002 ай бұрын
I am unable to get my IS2000 -00 into programming mode. Any clues?
@mansolo20212 ай бұрын
Can't believe it! It worked!!! Thanks a bunch
@richarddunkling28072 ай бұрын
Hi - Just been given a metrohm so your hard work regarding the circuit and operation is really appreciated. The circuit is more complex than I was expecting. I have yet to test it as I first need to source a suitable mini Bulgin mains plug. Well done you must have spend many hours working it out.
@JulissaChavez-bv3uk2 ай бұрын
you are amazing i cant thank you enough
@TD-ju2cw2 ай бұрын
I'm having an issue where i can force the usb to the value of 2 from zero, however it disconnects and reconnects my device. But similar to @sebek819, i don't have the USB mode 3.0 folder. Have you any advice to fix this?
@cliveradvan34142 ай бұрын
Very nice demonstration of "reverse engineering". 😊
@AintBigAintClever2 ай бұрын
I try my best :) It's also a good way of picking up little titbits of knowledge. When you work out the schematic you're looking for how it works. If it looks like it wouldn't work, chances are you've missed a track or messed one up. If I need a reverse polarity protection circuit I'll probably dig this schematic back up and look at how it was done here.
@Sigmaboss4792 ай бұрын
Willl try it on my Lexus RX 400 hybrid. I hope it works. Thanks
@j.p.15762 ай бұрын
NOCO is all marketing. I have two and they were both junk before the warranty expired. The cost to use the warranty is more than the cost of a competitor unit.
@joaquinfernandesgarcia9962 ай бұрын
1:58 It's time to turn the key switch
@josanbabu2 ай бұрын
Tried it on 5/4/2024, in chrome, using both no spaces and & spell=1. No longer works.
@adrianl67543 ай бұрын
Thanks for this but what is the procedure to clear the current keys saved?? Turn the key 2 times and what after that ?
@AintBigAintClever3 ай бұрын
I can't find my instructions at the moment but I *think* the next step is to add one of the keys you DO want, the difference is that this will now become the first key in the car's list rather than an additional one. So the only difference in process from start to finish is that one additional turn of the key partway through.
@sloopycat19543 ай бұрын
Hi Ain't Big Ain't clever and everyon. Do you where I can find the diagram for a Rugdoctor mp-c3 please, I have looked & looked but can't one, there's plenty with the switches in the handle but I can't find a diagram like the mp-c3 with the switches in the main body of the machine. Great video thankyou.
@AintBigAintClever2 ай бұрын
I've just looked and I see what you mean, the X3 manual has the switches in the handle but the photos on eBay have it on the lid. Take a look at the Wide Track manual available here, scroll down and there are diagrams showing what plugs in where. shop.usaclean.com/parts-and-supplies/rugdoctor/mighty-pro-wide-track/#section-docs
@sloopycat19542 ай бұрын
@Aintbigaintclever perfect exactly what I needed thankyou my fellow cdiffian I'm guessing by accent.
@AintBigAintClever2 ай бұрын
Valleys actually, butt :)
@sloopycat19542 ай бұрын
@aintbigaintclever The wiring diagram to the main body clearly shows the motor but it doesn't seem to show the 2 switches, please help if you can thankyou.
@AintBigAintClever2 ай бұрын
@@sloopycat1954 the X3 service manual has the switch wiring diagram, I expect Rug Doctor will use the same switches across their range (and DPDT rockers are pretty standardised) so whether in handle or lid the diagram ought to be the same.
@MichaelBeckh3 ай бұрын
Thank you so much. Changing ForcedUsbMode finally solved the problem for my TP-Link T4U Adapter. The USB options for the UI do not exist, but the important part works. Thumbs up!