PHL Brownstone

Пікірлер

@mikebloom5606 5 сағат бұрын

Nice cut for that spot!

@brandon9715 5 сағат бұрын

The fact that home inspectors have no liability other than what they charged for the inspection tells you all you need to know.

@10forthebigguy753 22 сағат бұрын

Smart money doesn’t buy pre-1975 house. Inspectors don’t cut large holes in drywall to look at pipes.

@PHL_Brownstone 22 сағат бұрын

@@10forthebigguy753 The basement was in the open bud 🤣

@stevie.on10 Күн бұрын

It’s not difficult but that’s what you’ll tel owners to get the most money… only wasting about 300$ in pvc but ur probably charging like 5k

@PHL_Brownstone 19 сағат бұрын

It was around $1,300 materials and labor.

@wadehaldeman2357 Күн бұрын

How'd this work out for you? I have had very similar issues with my 2002. Replaced PCM from HWY 71, along with pretty much every other part on the car. It ran great for a bit, but now won't idle up any. Thanks for posting!

@PHL_Brownstone 23 сағат бұрын

Same with me, worked for a while.

@PHL_Brownstone Күн бұрын

Here’s an update video Update, should I have replaced the entire sewer line?$$$ kzbin.info/www/bejne/sJSkl3Sjrbx7jpI

@NoneFB Күн бұрын

The very good news is that this plumbing replacement is WORTH A LOT OF MONEY TO YOU!

@PHL_Brownstone Күн бұрын

@@NoneFB nope 👎🏻 I’m cheap, just looking to survive! I don’t have the money sickness most waste their lives chasing. Money is just a tool to get through life while the most important is learning in life

@bobross3080 Күн бұрын

Your optimism is astounding.

@simardssurveillancesystems8209 Күн бұрын

Bro I Wanted To Cry For You After The Last Crack After You Taped It...Bro You Handled That!!!!!! Great Work.

@chrismallory3718 Күн бұрын

Deal with this daily running service

@rb8049 Күн бұрын

That is on the home inspector. No excuse.

@NoneFB Күн бұрын

No it is not the home inspector. We can inspect what we cannot see behind the drywall.

@oaxaca1948 Күн бұрын

they need new sewer pipes anyway. those are really old.

@oaxaca1948 Күн бұрын

home buyers should have caught and realtor. I don't trust realtors any more.

@oaxaca1948 Күн бұрын

I always go in the basement, I inspect the house first and then I call an independent inspector. not the realtors inspector.

@JohnThomas-lq5qp Күн бұрын

Years ago while I was rewiring a large house to a concerted triplex asked the cheap owner if he was going to replace the very old questionable cast iron drain pipe leading up to the second & third floor. House was rmpty for over ten years. Fast forward he had leaks in the wall & ceiling from bad drain lines. Probably cost him over $2,000 after he had to replace pipe, sheetrock on two floors, spackle & paint. Plumber tokd him while wall was open to pay him to install plugs in drain line then fill them with water for 24 hours but didn't want to spend the $.

@aprilcrihfield5627 Күн бұрын

Several reasons I dont have heat..this car sucks 😞

@PHL_Brownstone Күн бұрын

@@aprilcrihfield5627 well I hope you can get it fixed!

@liamchavez3810 3 күн бұрын

I’d say it works pretty damn well.

@michaelrainone296 3 күн бұрын

U didn't show us the technique for measuring and joining the pipes!!

@PHL_Brownstone 3 күн бұрын

In this video I was focusing on major problems missed by the home inspector

@steveo4031 4 күн бұрын

What's it for

@PHL_Brownstone 4 күн бұрын

To salt your driveway and sidewalk real quick! The kid bought it and we finally got a chance to use it

@damikco1 4 күн бұрын

Is the house settling really hard?

@PHL_Brownstone 4 күн бұрын

@@damikco1 no not at all

@steveo4031 5 күн бұрын

That is such a fuckin man job

@CHRnorton 5 күн бұрын

It shouldn't have passed the "Smell test" I can smell the stink from here.

@kybble 6 күн бұрын

This is what I fear is happening in my walls in my house upper and lower bath. Along with drain pipe and vent I have drum traps under tub sink and shower. All I can say you got real LUCKY that this house was modern enough to have drywall and not plaster and lath. I have plaster lath with massive crown molding that will likely have to be destroyed between the 2 floors.That is my next project.

@ocsrc 6 күн бұрын

I think that is old thermostat wire. It looks too big to be phone wire.

@PHL_Brownstone 4 күн бұрын

I also found it in the garage and upstairs. I believe it’s old intercom wires

@amirharris473 7 күн бұрын

Needs to be demolished

@brendakoldyk1647 7 күн бұрын

I work o a lot of houses and seen this. The whole pipe all the way out to the street should be replaced.

@davebennett6433 7 күн бұрын

You seem to hate your job…..quit and go into teaching junior high school kids.

@shanestamball1886 8 күн бұрын

You call this nightmares? This is bread n butter, myself and a helper restack entire 1930s ballon construction homes mostly in a day, sometimes 2days. It blows me away watching other professionals doing soil pipe work without a soil pipe cutter, and using fernco's on everything 😂😂 2nd floor to basement will a proper service hub ? 8hrs and 5K. Hell I'll even give a kickback on these jobs.

@PHL_Brownstone 8 күн бұрын

@@shanestamball1886 The difference is you do whatever, replace the stacks, collect the 5 g’s and leave!🤣 now the customer also needs carpenters and painters! I handle everything. The customer just bought the house so yeah having to deal with this is a nightmare

@shanestamball1886 8 күн бұрын

@PHL_Brownstone oh know, we cover all that also with exception of paint. Hang n finish the rock.

@davidmurphy4263 9 күн бұрын

Watched the video that You linked to this one Phil ; That is one Sorry A$$ Owner . moving would be best , hope that is an option for You . mold is bad for You . Take Care of Your Self Phil

@davidmurphy4263 9 күн бұрын

Sorry A$$ Owner , Think I Would Move Out .watched the other video that linked this one

@PHL_Brownstone 10 күн бұрын

Link to what the roof looks like. kzbin.info/www/bejne/rpvQoZ2bp8hjgq8

@moirhoh 10 күн бұрын

I just removed the HVAC housing from my 2002 Ram Van. It is not necessary to cut through the sheet metal. If you remove the cross member above the radiator, remove the condenser and disconnect all screws holding the radiator the radiator can be pivoted slightly. Then removing the right headlight housing you can bend the white sheet metal piece rather than cutting through it. This allows room to remove the housing. The problem with hacking through the sheet metal is you destroy the integrity of the front end and there's nothing to keep the radiator and headlight from moving.

@josephmosley4171 10 күн бұрын

You can tell those cracks were already there. This house obviously has set unattended for some time. A characteristics of old unused cast iron.

@PHL_Brownstone 10 күн бұрын

@@josephmosley4171 I believe the previous owners were involved in the military.

@josephmosley4171 10 күн бұрын

Fernco couplings, especially underground or in concrete should always have a shear ring on the fernco. FIO

@moirhoh 11 күн бұрын

Great video. The only issue is hacking the sheet metal. The shop manual is exceptionally good and has been reprinted. It says to remove the white piece. It might be possible to pull the HVAC housing out by removing the black radiator support, radiator and condenser. No matter how you do it it's a bear of a job. On my 2002 van the evaporator has a mat of thick crude so there's no way there's been any air flow for a long time. The beauty of a van is little space is waste on a hood. The problem is everything is crammed together so you have to take it completely apart to do anything. It takes a lot of patience.

@tomsut123 11 күн бұрын

It would have been nice to see How You Fixed It?

@oaxaca1948 Күн бұрын

well he took the old pipe out and put a new pipe in. nothing to see.

@carlodonnell146 12 күн бұрын

so you got 220 ......when I replace the 220 torque wrench Ill go back to it

@carlodonnell146 12 күн бұрын

I torqued mine at a little more than 150 because my 200 torque wrench broke some years ago and I havnt replaced it yet but 220 seems like too much to me because the 150 is very tight ...im afraid of breaking the bolts

@carlodonnell146 12 күн бұрын

its christmas now again .....😀...its not a bad try at making the tool.....but the real thing is always better

@mikejohnson9118 13 күн бұрын

Do you think the iron pipes were stressed//cracked by freezing-thawing?? or just old age. The good part looked thick enough. Also on PVC drains can you wrap them to cut down on the water noise? Cheers

@PHL_Brownstone 12 күн бұрын

Not sure what happened to the cast iron. You could wrap the pipes but if there’s a leak you would have a hard time locating

@sargonoshana2324 13 күн бұрын

Even with the smallest cracks I still had to do it three times. Waste of money.

@PHL_Brownstone 12 күн бұрын

The Sika crack fix is to stop the crack from transferring to a new surface you apply over the crack. You can tile or epoxy or just caulk over top and you should be good 👍 it’s not to fill the crack

@elainerussell924 13 күн бұрын

Did u send a video scope done the lower and upper pipe you cut off ??

@PHL_Brownstone 12 күн бұрын

I did not send a camera.

@johndecker3080 15 күн бұрын

I feel your pain. Bought a house 6 years ago. Home inspection missed code violation issues with plumbing, electrical and structural. Due to his contract, he’s responsible for nothing. So I got on line, gave him miserable reviews and used every media outlet available to warn people about this idiot. No requirements in GA for a person to become a home inspector. Just hang out a sign and charge people $500/per inspection. What a joke!