I finished a whole can on my CZp10c polymer frame. Exceptionally strong coat. Did a small video. kzbin.info/www/bejne/noLHZZ6abaxne6s
@Nontacticalboy4 жыл бұрын
Not tryin to spam but here is a video of my CZP10C with duracoat aerosol after a few thousand rounds, held up REALLY well. kzbin.info/www/bejne/noLHZZ6abaxne6s
@abitofapickle62554 жыл бұрын
I have a wasr 10 made in 2018. I have no idea what kind of finish it has, but it came from century. However this video intrigues me. Will it replicate the bluing on old AK's, and will it stick to my finish?
@DuraCoatFirearmFinishes4 жыл бұрын
DuraBlue Polished Black will look similar to the old AKs. We suggest that you rough up the existing finish with 400 grit sandpaper after degreasing. We cannot be sure since we do not know what type of finish Century used but chances are good that it will be compatible.
@MrAnimalControl4 жыл бұрын
Can I use duracoat over my previous rustoleum spray painted rifle for a good protection? Or will duracoat not work with spray paint?
@DuraCoatFirearmFinishes4 жыл бұрын
DuraCoat Clear can be used over good quality spray paints like rustoleum.
@TheJtg04114 жыл бұрын
Not sure why u shook the can before puncturing the inner canister. That's just shaking separated chemicals.
@hgarza11364 жыл бұрын
Would anyone know which fde colors they have resembles a Scar rifle?
@DuraCoatFirearmFinishes4 жыл бұрын
Desert Mirage Lizard is a good choice.
@michaelgordon21444 жыл бұрын
How long do you have to wait to apply the templates
@DuraCoatFirearmFinishes4 жыл бұрын
Overnight
@bill36414 жыл бұрын
Whats the shelf life of a partially used can ?
@DuraCoatFirearmFinishes4 жыл бұрын
Up to 4 weeks.
@davidbood95244 жыл бұрын
Can I ask what lift was used in the t-rex. Just in process of buying one. Thanks
@mathiasskyaris23624 жыл бұрын
Does this stay good in the can or does it go bad after a set amount of time after you mix the hardener.
@DuraCoatFirearmFinishes4 жыл бұрын
Once activated, the can will stay good for up to four weeks.
@easy30884 жыл бұрын
Scuff w scotchbrite pad no sandpaper?
@DuraCoatFirearmFinishes4 жыл бұрын
400 grit sandpaper is a good step to take for even better adhesion.
@knottreel4 жыл бұрын
I used DuraPark on my Uzi. I had a little problem with the coat at first, but the company made it right. This is a great company that I highly recommend. The finish is quite nice.
@Crashphoenix6664 жыл бұрын
Would love to see you demonstrate with an aerosol can as well since I don't have an airbrush sprayer, or compressor setup.
@johnjames774 жыл бұрын
Is it OK to use DuraCoat over a metal part that has been wiped down with OSPHO rust converter ?
@DuraCoatFirearmFinishes4 жыл бұрын
We do not recommend it since you will not get proper adhesion. If the part is rusty, you should sand or sandblast to remove the rust.
@johnjames774 жыл бұрын
Great ! You are the man and should be very rich !
@abdulmajidmahvy29094 жыл бұрын
I WILL DO IT AFTER LOCKDOWN IS OVER,EXCELLENT SIR,I GOT MIDLAND SUDDEN DEATH DOUBLE BARREL HAMMER SHOTGUN,I AM FROM MUMBAI, RETITED CHARTERED ACCOUNTANT..
@jeffwerner12914 жыл бұрын
Do recommend always using the duracoat clear after you duracoat your firearm? And would you use the flat clear or the satin clear. Thanks in advance
@waynet83274 жыл бұрын
No base coat necessary? Also, can I duracoat the barrel?
@DuraCoatFirearmFinishes4 жыл бұрын
No basecoat is needed. Yes, you can coat the barrel.
@waynet83274 жыл бұрын
@@DuraCoatFirearmFinishes, thank you.
@andrews42764 жыл бұрын
Is it necessary to sand the surface? I want to duracoat an AR-15 and the anodizing is flawless but still textured on its own.
@DuraCoatFirearmFinishes4 жыл бұрын
You will need to sand the anodizing to open the pores for proper adhesion.
@wild87574 жыл бұрын
For a shotgun after you remove the trigger group do you have to take apart every single part of the trigger group or can you just clean the trigger group good and spray it if it’s already got some blueing on it?
@DuraCoatFirearmFinishes4 жыл бұрын
It is always best to disassemble as far as you can so you get the parts properly degreased. If you leave any parts together, oil could seep out from between the parts and cause adhesion issues.
@wild87574 жыл бұрын
DuraCoat Firearm Finishes Thanks, I completely dissembled everything including the trigger group, I degreased everything and will begin sanding piece by piece once the kit arrives at my home, hopefully going to make this 1947 Remington model 11 look new again, wish me luck thanks again
@1001Hobbies4 жыл бұрын
I see everyone else applying 3 or 4 light coats, opposed to your one time application. How is this?
@DuraCoatFirearmFinishes4 жыл бұрын
You do need to apply 3-4 layers. The video is not showing all the layers.
@123s453e56a6l4 жыл бұрын
would one can be enough for an AK rifle including both carrier and gas tube?
@The_Absurdistt4 жыл бұрын
bondo for firearms..........
@geromenavarro53714 жыл бұрын
How can i buy thid duracoat sir??
@DuraCoatFirearmFinishes4 жыл бұрын
Where are you from? You can order directly from us for shipment anywhere in the US and many international destinations.
@geromenavarro53714 жыл бұрын
Philippines sir
@lastboyscout11504 жыл бұрын
I see you state you can apply to any metal. So, just verifying, it can be used over a chrome plated part?
@adamhobbs57794 жыл бұрын
How long do you leave the black to dry before you started sanding?
@DuraCoatFirearmFinishes4 жыл бұрын
Several hours or overnight.
@jimjensen10964 жыл бұрын
Looking forward to using this. Looks awesome!
@jamal69jackson774 жыл бұрын
What sort of heat resistance does Duracoat have? Can it be used say on engine components or bbq grills?
@DuraCoatFirearmFinishes4 жыл бұрын
DuraCoat will withstand up to 600F. For items that will get above that temperature, use our DuraHeat 2.0 High Temperature coating.
@gitar1hero1qaz4 жыл бұрын
Can I duracoat raw 1018 steel after I sandblast the top layer of material off of it? Is this a bad idea should I just pay someone to blue it professionally?
@windwrightmage4 жыл бұрын
Sold! Where can I buy
@ra6863874 жыл бұрын
used i liked it so I am a believer
@TShep7044 жыл бұрын
does the layers of paint interfere with the tolerances and actions/fitment of the gun?
@DuraCoatFirearmFinishes4 жыл бұрын
DuraCoat should be applied between 0.5 and 1.5 mils so it will not affect the tolerances of the parts.
@TheLordReverend4 жыл бұрын
Well I know what I'm using on my next build
@timhallas42754 жыл бұрын
Only one problem with this type of paint in rattle can... Once you mix in the hardener, you have to use up the whole can. It has a very short shelf life.... like an hour or two. This brings up a question of cost efficiency. If you plan to do this more than one or two times.. you'd be better served by owning real spraying equipment and mixing up a the amount you need for each project. I'm betting it cost nearly as much to do this yourself as to have it done by a professional.
@DuraCoatFirearmFinishes4 жыл бұрын
Our cans last up to four weeks after activation so you have plenty of time to use it up.
@timhallas42754 жыл бұрын
@@DuraCoatFirearmFinishes So, after you paint a firearm it takes four weeks for the paint to cure? I have painted with enamels and epoxies that use a catalyst (hardener), they turn solid in a matter of hours. They cure on the finished object in the same amount of time. How long do I have to wait before I assemble my gun, if i paint it with your product?
@ElCineHefe4 жыл бұрын
How do you remove Duracoat to do a different color without spraying too many coats on the firearm?
@DuraCoatFirearmFinishes4 жыл бұрын
The best option would be to sandblast it. You do not have to completely remove it, just rough it up and remove some to prevent it from becoming too thick.
@ElCineHefe4 жыл бұрын
@@DuraCoatFirearmFinishes Thanks! It's time for a new color.
@markkerr8744 жыл бұрын
Where do I get the $34.95 price? I can't find it on the link you provided. Thank You.
@rmblwgn4 жыл бұрын
Anybody know what the standard black finish is on an AR 15 upper and lower and can I paint over it with durakote like seen in this video
@DuraCoatFirearmFinishes4 жыл бұрын
We recommend either Matte Black or Tactical Black depending on how much sheen you want. You can coat over the existing factory anodizing by degreasing and roughing it up.
@rmblwgn4 жыл бұрын
@@DuraCoatFirearmFinishes ok I want to paint it bronze. So sand it and degrease it? What is your closest color to burnt bronze
@sbattle764 жыл бұрын
what is the stick called that you are using to hold the slide? is it just something you made or can you buy those somewhere?
@DuraCoatFirearmFinishes4 жыл бұрын
We usually use wooden dowels with masking tape on the end to get a tight fit.
@sbattle764 жыл бұрын
DuraCoat Firearm Finishes that’s exactly what I did thank you.
@thomasgates81564 жыл бұрын
Does this cover Engravings on the gun or can they still be seen?
@DuraCoatFirearmFinishes4 жыл бұрын
DuraCoat is thin enough not to cover serial number and manufacturers markings.
@markpotter24854 жыл бұрын
I have a respirator. What filters do I need. Good video!
@thevillepeople4 жыл бұрын
What color is that?
@AndrewBarry654 жыл бұрын
Hi, can I use this to repair (paint over) scratches on my S&S exhaust can on my Harley? S&S told me the coating is Cerakote. thanks
@2wheeleddemon9994 жыл бұрын
Having a hard time deciding between duracoat and cerakote
@jacionemendes88274 жыл бұрын
Como faz pra comprar um quite desse aerosol
@DuraCoatFirearmFinishes4 жыл бұрын
We are able to ship to many countries. Where are you?
@CamaroRick4 жыл бұрын
Might have to try it on some fasteners
@TyrantExterminator17764 жыл бұрын
Could you use this as way to paint camo on a firearm rather then use spray paint over the already existing finish?
@DuraCoatFirearmFinishes4 жыл бұрын
Yes, DuraCoat can be layered to create camo patterns. You should rough up the existing finish with sandpaper.
@Dannyhuskey20114 жыл бұрын
What is the cure time before it is 100% cured? Thanks
@DuraCoatFirearmFinishes4 жыл бұрын
Items can be reassembled the next day but you should not use any harsh cleaners or put it through rough use for 3-4 weeks.
@gregfalde72504 жыл бұрын
I met this guy several years ago when he was shooting with his friends. Great group of guys. Didn't realize who he was at the time. Generous, friendly bunch. Gonna get some tactical green for a Ar15 build I'm doing.
@leerethamel32044 жыл бұрын
can the filler be brushed on?
@DuraCoatFirearmFinishes4 жыл бұрын
Yes, it can but it needs to be applied thin so that it dries quickly.