In the Alexa app, when I enable HomeAssistant it takes me to HomeAssistant Cloud, and to Naub Casa. What can I do to restore HomeAssistant?

I watched this to get off of skyconnect. I keep having things drop off the network so I am trying a dedicated device that runs off of POE so that I can keep it farther from my server.

I had the same idea but didn't install radar sensor bulb at last moment cuz gallery I was planning to put that bulb on has curtains that make false movement any solution?

Mkbhd

3 years later this was still a great guide to get Frigate setup. Thanks Lewis :) For those who are struggling to find the correct host name (@18:18) check under: Settings, Addons, Frigate, it shows the host name there. =)

Can we get someone to build one for us? Is that possible? Would like Luke Link or Everyone Smart Home to build me one.

Any updates for best hardware for HA server?

I love the LLM stuff. But I'll wait until I can integrate a locally run LLM. Idm using ChatGPT itself but I don't really want to give it access to my home like that

Could I have a panel/table for each zone

I have a SkyConnect, and I think it works with Zigbee2MQTT now officially. I'd like to switch over, and it seems like it's a painless process to migration the other way around. Excited to try MQTT. I'm not sure about ZHA compatibility with light strips 'n such, so I'm going to look into Z2M. I also think Z2M is really neat. Confusing and complex, but it adds so many things to improve the network like allowing multiple coordinators and remote coordinators, so I'm starting to think it's the better option for me in the future.

sir, your instructions are very great !

Thanks for this tutorial. I managed to do this with Comprefece because Deepstack is no longer suported. It works perfectly :) thanks Louis !

Great content, thumbs up for that. Looking to recreate the process for my bed and getting some issues. All the wiring and calibration is done and works like a charm (had to switch E+ and E- pins since I was getting negative values). But as soon as I upload Bed_Sensor.ino with modified config.h - I'm getting all kinds of weard readings. It works fine for few measurements and then: Exception (0): epc1=0x40223560 epc2=0x00000000 epc3=0x00000000 excvaddr=0x00000000 depc=0x00000000 I'm not strong on Arduino or C++, so can't make heads or tales of it. I'm using same hardware except WEMOS D1 mini Pro. Can you direct me to forum or help me with direction to get this thing working? Thanks in advance for any input.

Great video, thank you very much. Is it possible to operate the whole thing with a battery?

Wow, the newer videos are way better. I can tell you're reading a script here and not talking to me as a viewer. It's incredible how far you've come in just a few years!

Only real issue for me is that it will only work with 1 chime and we have needed 2 on other doorbells (2 storey home) Can this be overcome with Google home or Home Assistant?

3.5 years ago, Blueprinters were added and required YAML files rather than editing directly in Home Assistant. Today, it's the exact same. I wish I had an easier way of creating and testing these myself. Templating your Automations with Blueprints is super important. I have a lot of things that are very similar, and it'd be easy easier to make them all the exact same with a single place to edit them. I'm surprised Scripts have Fields as first-class UI citizens, but Blueprints are so difficult to add in. Lots of room for error and difficult to debug :(.

I followed your tutorial and it worked perfectly! Thanks for this video! Gonna subscribe :D

Do you expect the CM5 to be compatible with the current Yellow board when it’s released?

Can this replace a switch on the wall or do you have this in addition to a switch?

It’s way to large compared to competitor products

as someone very much opposed to openai's business model, I'm annoyed enough at integration, though understand the push. I'd be extremely pd and looking at other options if it was automatically enabled. I want to have zero things common with the likes of them. Also, it's not " we don't know what they do with the data". They sell, store and reference and essentially de-anonymise it.

I was considering this lock for a secondary door of mine (already have an August 4th gen with the Keypad working with the Yale BLE integration in HA on the front door), but hearing that it requires the hub is a deal-breaker. The rest of my switchbot kit works just fine using the Switchbot BLE integration and a few ESP32s being Bluetooth Proxies. I will likely just end up buying another August. :/

Would this work on a Mac using a Hikvision NVR and cameras?

The issue I ran into was I couldn't open my garage. We went on a walk, and it was getting dark, starting to rain, and extremely hot. So we were stuck out there waiting for MyQ. Had to call my parents to open the door for us.

@EverythingSmartHome i had this stuff for a while now, extended openai conversation integration... and not all in wanky ways, my assistant can currently give me summaries of my working hours for the week( i use to check i got paid properly), i can tell it to download a movie, and it submits a request to ombi which sends it to radarr or sonarr and starts downloading almost instantly, it can check the status of media being downloaded, i gave it baseline stats which has lead to a really usefull set of features, such as yesterday when i asked it how everything is going(thats all i said) and it gave me a report detailing how my router has been losing wan connection intermittently so i asked it to check the routers logs and it correctly diagnosed my pos routers tables being jammed up and needing a reboot, which i then had my assistant do for me with a shell command which leads me to the best evolution of my assistant... now that it knows it can run shell commands, and has all my api keys and service logins for all my homelab gear. like i forgot to expose an entity to it, so it naturally replied i dont have any information, then i said you have all the information required to access my home assistant api, please get the information required from there, and the best way i could get command outputs back to it is with piping the output into a file and using a file sensor to let it access the results, but my voice assistant can indeed now communicate with my homelab apps and with the outside world through the command line, and i didnt even tell it how, all i gave it was api's logins and addresses in the prompt.

Hi If you please help me: I am still new to these. Is it possible to create controll center like Sonoff NSPannel Pro using Home Assistant on raspberry pi5.

Awesome walk-through 🙂 Thank you so much 🙂

Hi, this is so nice, can it also be a fall down sensor and present and heart beat sensor?

Sorry but there is no coordinator.json file in the backup ???

Mine didn't work with port on url i had to use url without port

I followed your tutorial yeeears ago and it saved my life. Sadly I tried to update the HyperHDR Version to the latest and now my lights wont work at all. Apparenly I need and ESP32 but I'm not finding any tutorials that explain well how the the connection is supposed to go. Please make an updated version of this toturial so people don't have to struggle since you explain everything so well! Help meeeeee! I just want to enjoy everything as I used to thanks to my lights :(

Lewis - when are your pro sensors coming out? thank you.

Great information. 👍

Could you review Nuki please?

i cant open homeasissent Webseite

I use Z2M.. in your instructions you do the backup with Z2M and then upload it to ZHA? Does that mean I have to do a migration at the same time? I would actually really like to stay with Z2M, is there a way to restore the backup in Z2M?

The worst doorbell period.

Weird thing happened to me. Thanks to Lewis, I was using this setup for more than 2.5 years. Then few days ago suddenly, for whatever weird reason, the URL stopped working. Then, when I started digging, I found out that the DuckDNS addon, had mysteriously uninstalled. I never uninstalled, it was just gone. Then, I re-followed this tutorial and I was up and running in less than 5 mins, but with a small issue. I could not login locally with the URL. And this time, the difference was I was using pfSense. So, back online searching for answer, but luckily I found the solution on the very first article. On pfsense under System/AdvancedFirewall & NAT try setting “Enable automatic outbound NAT for Reflection” to true and “NAT Reflection mode for port forwards " to NAT+ proxy”. That was it. Anyway, I can confirm that this still works like magic.

I know this video is old and maybe something changed but the last part about removing the header isn't working for me. The dashboard code is super simple, I'm not typing it wrong. But when I refresh nothing changes

It'd be nice if you started the video by saying where or how you access these cards. What's the point of showing us cards viewers don't know how to get?

Just don’t upgrade if you’re using an old iPad as a dashboard. It breaks Lovelace completely (as has happened before!). 2024.6.1 patch does not fix this. 😢

Thanks !!

Nice LTT shirt!

Does it work through 4G gsm network? for adding a new code for the keypad for example?

It even handles a sticky knob, nice. lol

enable the 2fa module as well.

Z Wifi kzbin.info/www/bejne/mqiok398qNd1iLcsi=5FodZ9XW9Hir6V5A

I'm trying to change from my rpi4 microsd based install to something "better" and turns out I have a Jetson TX2 lying around.. any chance I could run HA natively on this given one of my wants was to switch away from microSD and to sata or nvme

Great tutorial for a beginner. Appreciate the effort you have put in to ensure the right level of details are included and presented in a very cohesive manner.