REDIYPROJECT

Пікірлер

@chevyvantravel9735 2 күн бұрын

How tall is that lighthouse and where did you get the turning light?

@ADROZDOWICZ1 22 күн бұрын

What size planters did you use and where did you purchase them?

@leighpratt9826 Ай бұрын

For the idiots like me: make sure there’s no charge left in the battery before doing this. Something I touched near the battery made it turn on and the edge of the motor nicked my hand leaving a nice deep cut. Also couldn’t turn it back off so had to leave it running until it died.

@Jay-ft7ot 3 ай бұрын

How to open black and decker duster extreme to check battery

@mglax13 4 ай бұрын

Did I miss the "How to" part?

@markp1512 5 ай бұрын

what is the biggest branches you have put in it ? also would buy it again ? any problems with it ?

@markp9109 5 ай бұрын

What’s the biggest branches you have cut with it ? Are you still happy with it ? I like the orange efcut color better, but it seems to me that they are the same machine, and the S1 is much less on Amazon right now

@pinoybikernj3438 5 ай бұрын

I think they are same machine. Around 3in dia with no problem. It need the wood to ne straight if not its hard to load. Im looking for a good replacement blade

@markp9109 5 ай бұрын

@@pinoybikernj3438 thank you. Are you overall happy with it ?

@raagtop363 6 ай бұрын

I must have missed the part where you explained what you were doing. Someone previously asked for a dialog about the soldering process and what battery brand is used to replace. i agree.

@Bluetangg 8 ай бұрын

Too much knowledge I don’t have.

@richardburton9359 9 ай бұрын

Music is crap. How about commentary ?

@coloradostrong 10 ай бұрын

Mine melted at the top and caught on fire. I used an LED car headlight bulb rated at 100 watts. The rotation device fell off while burning, and burned the bushes and doghouse up next door. I made another lighthouse out of bricks and it works great. No more yapping dog to deal with now. The nasty thing got scared and ran off, and was hit by a truck.

@user-qg8xf1uz5c 10 ай бұрын

Would like dialog and discussion about the soldering process, battery tabs and what battery is being used and where to purchase

@wescat2 9 ай бұрын

Spent more time removing and replacing screws.

@raagtop363 6 ай бұрын

A few words, now and then, would have been most helpful.

@artie9403 11 ай бұрын

Thanks for the video! I’m trying to decide between the S1 and the S3. If you have any thoughts after using it for a while please post another video. Thanks again.

@rediyproject 11 ай бұрын

The S1 has 6 addational hammers plus the 2 knives. I like S1 better

@rediyproject 9 ай бұрын

i like S1 better but more pricey compare to S3. see my link on my descriptions

@gtlogic6023 Жыл бұрын

Would this work well to make pine park nuggets into pine back fines?

@proudtobeindian1092 Жыл бұрын

Give me contact number for this

@omarpopioco9997 Жыл бұрын

Dayum!! Genius! 🤯Great Build 😎👌👌👌

@Richard-nb4iv Жыл бұрын

Nice! I'm thinking of trying to build something like this!

@wendzbikerides3790 Жыл бұрын

Nice! Pa lechon ka na. 😊

@johnhe666 Жыл бұрын

WHAT IS MODEL OF BATTERY ?

@anarchisttutor7423 Жыл бұрын

I can't get mine to start, despite following the book's instructions and an online video. Anybody else get a dud? UPDATES: I put more oil in it and it started perfectly. My oil had been in the "acceptable" range according to the book, but it wasn't enough. Blades hit a rock or somehow came apart some other way. Damage to shell and flywheel. Trying to repair it.

@joannamiller33 Жыл бұрын

Mine won’t start either 😢

@billt913 Жыл бұрын

Is it possible to transport this in the back of an SUV? I plan to buy it and try at home, then transport it to some land I have to chip up a bunch of branches there. Maybe it would be necessary to take off the chute before loading into the SUV (4runner)? Thanks.

@rediyproject Жыл бұрын

Yes. U need to separate the motor to the holder slot. Just need to take out 4 screw bolt.

@hiboostsupra5965 Жыл бұрын

Ortur instructions say you need to cover acrylic in dark paper first, but it looks like you just used the acrylic clear and it was fine? Also, what speed and power did you go with? Thanks!

@rediyproject Жыл бұрын

If you like my Videos then Please Subscribe to my Channel and Press Bell 🔔 Icon for latest updates.🙂

@rediyproject Жыл бұрын

If you like my Videos then Please Subscribe to my Channel and Press Bell 🔔 Icon for latest updates.🙂

@intentionallyinpired Жыл бұрын

Can I get a tip on why mine will only run a minute or 2 then shut off. I haven't chipped anything yet ..helppp.. thanks

@pinoybikernj3438 Жыл бұрын

Check your manual. Last time it happen to me is my setting is not correct. Check yung choke and maybe got gasoline on your carburator just drain it. If its new and you usally setting...gasoline and oil...to much oil also causing problem.

@intentionallyinpired Жыл бұрын

@@pinoybikernj3438 got it going.. thank you

@peterclark1069 Жыл бұрын

Awesome idea!!

@jeremyminns5627 Жыл бұрын

Where you get them bad boy hollow tines at man😲👍

@rediyproject Жыл бұрын

I purchased from ebay search AERATOR CORE TINES

@rediyproject 9 ай бұрын

See my link. Thanks

@RCLoversan Жыл бұрын

Great project! I believe I built a version of it which is slightly less bulkier. Please feel free to watch my tutorial on my channel.

@patriciamagatrator3843 Жыл бұрын

New Samsung/LG/Panasonic 18650 batteries are about $8 + shipping. Good for 10 years or 500 recharges, whichever comes first.

@robertharper3754 Жыл бұрын

Thank you so much!!!! My mom's handvac has the same battery pack and this vid will help me fix it!!

@pongagt Жыл бұрын

Thanks. The 14.4 volt one take 4 cells.

@EasyVideoMaking Жыл бұрын

where do i get the replacement blades ??? 😭

@rediyproject Жыл бұрын

Blades are selling in Amazon i think i post the link in the comment.

@EasyVideoMaking Жыл бұрын

@@rediyproject thank you, what tools are needed to remove the blades?

@DM-pe2iy Жыл бұрын

I used mine 4 days straight. Chipping up 5 years worth of cut brush. I was surprised it chipped old brush so well. Very impressed with the machine. I think I dulled the blades already though.

@DM-pe2iy Жыл бұрын

I bought the same machine. It works awesome. Your's sound like it is not revving high enough?

@rediyproject Жыл бұрын

Yes. When i do the video im not familiar with the setting and my throttle is not high enough and the choke is not fully open but i figured it out.

@rediyproject Жыл бұрын

Yes. When i do the video im not familiar with the setting and my throttle is not high enough and the choke is not fully open but i figured it out.

@bumblebimmer Жыл бұрын

I dont know if you know this but e100 is a kick to start.. probably why it didn't work on the bench .

@generichards8404 Жыл бұрын

Needs closeup and cleaner workbench! But thanks. And what are the sticky things you put on at 3:28?

@skullium Жыл бұрын

Hey Gene, those are just insulators, the entire body of an 18650 cell is negative up to the top (just the center flat bit is positive). These lower the chance of a short if something were to touch the positive top and negative rim.

@bruceatkinson5357 Жыл бұрын

Agree. Hard to see exactly what he was doing . I t looks like mine has the same 3 batter pack, How do I know what batteries to buy and reassemble it. Nice clear video though. .

@bruceatkinson5357 Жыл бұрын

Did you get an answer on this?

@user-wo5wn9bp4j Жыл бұрын

Can the mulch that’s created from the chipper be used in a garden bed?

@pinoybikernj3438 Жыл бұрын

Yes. I used it my garden

@BEASTNYC Жыл бұрын

hey, what replacement batteries did you use?

@rediyproject Жыл бұрын

3.7V 18650 Li-ion got mine from old laptop batteries.

@fallback8314 Жыл бұрын

just picked up a black and decker pivot. yesterday. i'm about to return it tomorrow due to AWFUL battery performance. could this work for it?

@BEASTNYC Жыл бұрын

thanks mate!

@adrienbastarache8096 2 жыл бұрын

You son of a bitch,people here make them ,don't buy them to unwrape them to show off,one big thumbs down ,tell my friend too.

@troywisdom5193 2 жыл бұрын

Can i ask where you got the led base for your clock? Nice execution!

@rediyproject 2 жыл бұрын

Search in ebay or amazon LED BASE

@sr8shoota 2 жыл бұрын

Would be nice to show more info on the rear wheel conversion. I am trying to see how you did it but I think the vid skips.

@mukeshchemistrygadhpatory6449 2 жыл бұрын

Price

@rediyproject 2 жыл бұрын

Around 105$ in amazon

@EricSocash 2 жыл бұрын

I just bought this same one off amazon.. I hope it works well like yours did in the video! Question? Since you have had it. How many yards of mulch have you made?

@rediyproject 2 жыл бұрын

For 10sqyrd maybe i got 4 full wheelbarrow. I like the specs of this machine the blade can be easy replace...i think the design is same in EFCUT wood chipper

@EasyVideoMaking 2 жыл бұрын

@@rediyproject i just bought the same one, wondering about replacement blades, are there part numbers?

@On_E_Garage 2 жыл бұрын

I just bought mine yesterday, about to use it for the first time. I thought about doing a review as well as I am trying to restart my own KZbin channel. I have done a utility cabinet review and I also work on vintage cars and trucks

@OgKeith111 2 жыл бұрын

@@On_E_Garage please do a review and explain how to start it because mine isn’t starting and this guy didn’t say one damn word

@On_E_Garage 2 жыл бұрын

@@OgKeith111 I will upload a vid real quick!