You had my respect at “I’m a horder I collect things”!!
@CharmleysChopShopКүн бұрын
So, could you do the flip kit, and a 2inch lift shackle to achieve a 4" drop? Hangers suck cause you gotta drop the tank. And it'll be easy to drop it to 5 or 6 in the future.
@differentgarageprojects565616 сағат бұрын
Yeah, it will be the same thing I did, in this video. Exactly that’s why we didn’t want to do drop hangers in case later on he wants to go lower. It’ll be much easier.
@thomasmoreno43142 күн бұрын
Hey bro where in Cali do you live at looking to do the same thing to my Tahoe what would you charge to do it thanks 🙏
@UnratedRetribution4 күн бұрын
Hey bro, I dont know if you are responding to comments in 2024 😅. My rear end is a posi track with 327 gearing with drums. I want to go to a 373 gearing with disc. What all would I need to make this work. I'm looking to find someone parting something out and pick up everything I need. Also, the hard brake lines and e-brake cables, will it matter if the two vehicle lengths are not the same? I guess will those things come in different lengths as well and possible not match up? I know that was a lot, and thank you for the video ether way👊
@differentgarageprojects56562 күн бұрын
@@UnratedRetribution as long as rear end is complete with everything needed to bolt up you should be good. Now as far as e brake cables you need to find the ones for you’re chassis For example if u have a Crewcab the e brake cables need to be off that
@cesarestrada17064 күн бұрын
big thank you brother
@DustinPope-h9c7 күн бұрын
Is your control arms touching the bump stop on top of
@differentgarageprojects56564 күн бұрын
No they didn’t
@raiderzilla459 күн бұрын
Do you know what center console will fit 07-13 Silverado , Tahoe , Denali , suburban
@chrisc763910 күн бұрын
Does it matter what volt kill switch
@markengle219917 күн бұрын
New to this sorta thing. You can tune within a dyno?
@longlivechina753819 күн бұрын
What is the radiator behind the tru cool do?
@brandonwiley748920 күн бұрын
Did you have issues getting an alignment? Doing the same thing but having issues getting alignment done.
@thomasmoreno431421 күн бұрын
2wd or 4x4
@davidmariopratt21 күн бұрын
Cool Video, and informative. I wish to do the opposite. take out the console and put in the 40/20/40 jump seat.
@DylanCaudle-p4v29 күн бұрын
did you use the factory control arms or the 2-4” upper control arms
@differentgarageprojects565628 күн бұрын
Factory
@chakaboyyy91Ай бұрын
How much u want for the stepside bro
@differentgarageprojects5656Ай бұрын
Its been sold
@B_HarTzАй бұрын
This video is pretty good…. JK it sucks
@differentgarageprojects5656Ай бұрын
Thabks for the comment 😉
@danielmachado7477Ай бұрын
appreciate it brotha
@bajafishtacoАй бұрын
Did you get it all done in 1 day? I still havnt installed my kit lol
@gustavomorales9154Ай бұрын
Has the ds18s been holding up well?
@differentgarageprojects5656Ай бұрын
Pretty good no issues with them
@Nonenone23Ай бұрын
Nice
@iowahill1Ай бұрын
Great how-to, and also great that you provided links to the additional parts needed for a professional install. Many thanks!
@differentgarageprojects5656Ай бұрын
You’re welcome thanks for watching
@jewllakeАй бұрын
Any new videos in the near future?
@yomer95372 ай бұрын
Great looking rig…enjoy it
@jxse_htx16982 ай бұрын
Man I’ve been lookin for you on Instagram I’ve been a fan of ur build for a long time ago idk if u got another instagram acc
@christianmedina47532 ай бұрын
Hey carnal bajas troca y vives en California ablame
@HectorGonzalez-ul3rt2 ай бұрын
I have a 2003 Suburban
@jesusestrada30052 ай бұрын
how low can you go and use it daily…is a 5/9 good for 06 crewcab?
@kevinmills97942 ай бұрын
Where is the proportion valve located is it the brake pump itself
@eddie82792 ай бұрын
THANK YOU!!!! I have been trying to figure out a way to remove mine without breaking them. good video!
@felixgallo16932 ай бұрын
How do you get it tuned, or where do u gotta take it
@differentgarageprojects56562 ай бұрын
Find a tuner in you’re area
@owenl_86783 ай бұрын
So I did this turned on for a few seconds then a heard a pop and my ac stopped working and the head unit won’t turn on. I hear the ac blowing but nothings coming out of the vents now. Any help?
@differentgarageprojects56563 ай бұрын
Check your fuses and also check your wiring again. Something must not be connected correctly. Sounds like somethings shorted out.
@JL-ru2bu3 ай бұрын
Front end question, are drop lower arms and drop spindles required? Your video along with a couple of others just use the drop spring, but my local shop says to use those listed above?
@differentgarageprojects56563 ай бұрын
How low are you trying to go in the front?
@JL-ru2bu3 ай бұрын
@@differentgarageprojects5656 03 Silverado ext cab, wanting to go 3/5, with 22s, 285/35/22
@differentgarageprojects56563 ай бұрын
@@JL-ru2bu So for your drop, I would recommend a 3 inch lowering control arms by DJM Suspension. But if you’re on a budget, all you need is 3 inch drop springs in the front
@JL-ru2bu9 күн бұрын
@differentgarageprojects5656 got my rear end done a last week, and ppl keep telling me to keep that Cali lean. If I decide to keep the lean, is there anything I need to do or be concerned about(driving wise/alignment wise) I am replacing everything new regardless of what I decide to go with.
@Titian923 ай бұрын
The sensor is for the temperature gauge on the mirror.
@dlawson89933 ай бұрын
Do you have solid motor mounts? Mine idles like that and the engine looks like it wants to jump out of the car.
@differentgarageprojects56563 ай бұрын
No I don’t. I replaced my motor mounts when I did all this. But with stock mounts
@brandonmccall39293 ай бұрын
Do you need those shock extenders cause I didn't use them in the rear ?
@differentgarageprojects56563 ай бұрын
You would probably have a smoother ride If you use them, that way, your socks have more travel space
@PapiEsco1233 ай бұрын
Thank you for the video much needed 🤝
@Zack-smith4 ай бұрын
Are those z71 rims I been looking for a set for my Yukon and can’t seem to find them anywhere
@differentgarageprojects56564 ай бұрын
Yes they are
@Zack-smith4 ай бұрын
@@differentgarageprojects5656 what size tires are you running they look amazing
@differentgarageprojects56564 ай бұрын
@@Zack-smith 285/70/17
@yabdielcrespo4764 ай бұрын
Where can I get the trim pieces?!
@differentgarageprojects56564 ай бұрын
Junkyard
@jonathanmedina14244 ай бұрын
What spray gun did u use ? looks good man . Definitely motivated me to do my own 👍🏼
@adann56384 ай бұрын
I put a ss2 cam in my 6.0, I changed the springs but they where new stock ones, making a lil tapping sound. Went thru 3 sets of lifters and rods and still there, u think its cuz I'm not using these Pac 1218 springs?
@differentgarageprojects56564 ай бұрын
It can be the springs but it can also be a few different things like rods could be to long or to short. What brand lifter’s? Tapping could also be from a exhaust leak and sounds like a tap
@ItsAlexxC2 ай бұрын
I would get the pac 1218 springs. “Upgraded valve springs are required due to increased lift”
@adann56382 ай бұрын
@@ItsAlexxC yea I’m gonna get the springs next, I think tbh it’s because I put a cheap eBay china cam in. Ordered a Elgin stage 2 today. If that don’t work then those pac springs are next on the list
@bajafishtaco4 ай бұрын
I know this is mad old video but how hard is it to do that kit? I can flux core weld and cut and shit like you . Was it really hard ?
@differentgarageprojects56564 ай бұрын
If I was able to do it, I’m pretty sure you can bro just take your time with it. That way you don’t cut too much. I rather cut a little at a time.
@bajafishtaco4 ай бұрын
Ok thanks @differentgarageprojects5656
@bajafishtaco4 ай бұрын
Are those the reklez tubs in the front to? Did you have a video on those front tubs? I cant find it @differentgarageprojects5656
@differentgarageprojects56564 ай бұрын
@@bajafishtaco I did have a video on that but I guess it got deleted I tried looking for it. And no, they weren’t reckless. I made my own, although reckless, makes a clean set up
@revenanthopkins39214 ай бұрын
nice truck your tunner guy do othere peoples tunes aswel let me know please thank you
@differentgarageprojects56564 ай бұрын
Unfortunately, He’s no longer doing tunes
@adolph2894 ай бұрын
awesome
@anthonya.33914 ай бұрын
What welder u used bro ?
@differentgarageprojects56564 ай бұрын
Lincoln 180 240v
@robertmaloney29884 ай бұрын
Optimus
@kamaintshittt5 ай бұрын
if i got 2 in drop shackles on rn could i put 3 in blocks on and do the front for a 3/5 drop? and get a notch welded or should i just go flip kit and put the lift shackles on it?
@differentgarageprojects56565 ай бұрын
The 3 inch blocks will only lift your truck up at the moment unless you get a flip kit then install the 3 inch blocks. Because in order for the lowering blocks to work, your diff hasta be sitting on top of the leaf springs. And right now as you sit diff is sitting on the bottom of leafs
@kamaintshittt5 ай бұрын
@@differentgarageprojects5656ohh ok so the best route would just be to take the approach you did?
@differentgarageprojects56565 ай бұрын
@@kamaintshittt you can do that or you can also get drop hanger’s
@AbuSattam.com.5 ай бұрын
Helpful information I’m thinking the opposite 😅 i would like to remove the center console on my Escalade 2005 to just have space and replace it with refrigerator any thoughts ?
@bmack29385 ай бұрын
On my 21 sport 4x4 neither tie rod would drop. I beat on it quite a bit and no movement at all. I put some PB blaster and no help. I put a wood block on the bolt and still it wouldn’t come out either side. I had to put it all back together. I guess my mechanic is gonna have to do it.
@bryanescobar90715 ай бұрын
thanks man very helpful!!
@santiperalta19585 ай бұрын
For the swap do you need change out the bolster? Or can I use the one I have