2004 Chevy Tahoe fog light install dual color changing yellow / white LED bulbs

We installed some new fog lights on my old tahoe new housing and dual color changing bulbs.
White and yellow color change
FOG LIGHT HOUSING
RP Remarkable Power, FL7076 - Silverado 1500 2500 3500/ Suburban/ Tahoe Clear Bumper Fog Lights www.amazon.com...
FOG LIGHT BULBS
CIIHON 881 880 LED Fog Light Bulb 3030SMD 35W Light Bulbs Not Headlight 1900LM Dual Color 6000K White 3000K Yellow 886 896 DRL Replacement Pack of 2 www.amazon.com...

[@FugaConManolo]

Thanks to you vid I changed all of my lights to LED. Good looking out!

[@jewllake]

I have LEDs in my fog lights also. Went with Eagle Eyes. Be careful with the LED bulbs, some are not 100% water tight through the heat sinks and water, splashed with high force through the front wheels when going over a big buddle, can be forced through the harness and heat sink. I learned the hard way and my new lenses got wet and water stained inside and had to buy a new set. It sucks how GM did not enclose the back side of the housing. I bought a different brand of LED and siliconed the wire harness well to avoid water intrusion.

[@differentgarageprojects5656]

Thanks for the heads up I never thought about that. Yeah GM did nothing to cover up the fog lights at all. And I know I just realized it lol. I’m a keep a close eye on them hopefully they stay dry 🤙🏼

[@lowboostedaccord4933]

It's the little things that count now it's got good lighting 💯

[@differentgarageprojects5656]

Yes sir. And they sure are. ⭐️

[@Trixtayt]

looks good to me thanks for the video .

[@ScottyP443]

There needs to be a mod that can have it stay white and flick yellow for the turn signal

[@deebrown8327]

We're did u get the fog light bulb from

[@desert07576]

Do you know if these fog lamps will fit the Z71 round style fog lamp? What is the bulb # thank you sir.

[@differentgarageprojects5656]

Don’t know if they will fit the z71 round style foglights but bulb size 880

[@chakaboyyy91]

How much u want for the stepside bro

[@differentgarageprojects5656]

Its been sold

[@ozxxz]

are you gonna drop the truck that needs a new cab?

[@differentgarageprojects5656]

Its already dropped on a 2/4 drop. But the plan is to go lower

[@ozxxz]

@@differentgarageprojects5656 what drop i was wondering if you go low eneugh can you show us how to cut the panels to have room to tuck wheeels like for a 10” drop

[@differentgarageprojects5656]

@@ozxxz Honestly I probably won’t be going that low may be a 4/6 at the most. That one I want it to be more of a race truck.

[@differentgarageprojects5656]

@@ozxxz I already have a video where I cut the bed out for the wheel tubs don’t know if that’s what you’re referring to

[@ozxxz]

@@differentgarageprojects5656 yea but is it the same process for stepside trucks i thought you could just cut the panel and now the bed. itself