You’re very welcome! You’ll want to check out this one as well before you buy your blind cord. RV BLIND (Day/Night Shade) PERMANENT REPAIR - No More ReStringing!! kzbin.info/www/bejne/gKXYmnuEhKtjmac
@pearlinelucas60589 күн бұрын
I weigh 340 lbs. Would I break the ladder if I used it to repair my awning like you did?
@EddieAtLarge6 күн бұрын
Unfortunately, this ladder is only rated for up to 250 lbs. However, there are a few other telescoping ladder brands out there that are rated for up to 400lbs, although I did not see any that were “A frame” like ours, only straight extension.
@larscarlson9218 күн бұрын
Thanks for the video. Did you get an additional sensor for your gray tank as you mentioned? If so, how is it working for the gray tank?
@EddieAtLarge14 күн бұрын
Hey Lars, yes, I did. They work ok, but, not as well as the fresh water tank sensor. The fresh water tank bottom is flat and the grey tank bottoms are sloped, so, it’s very difficult to find a level spot for the sensor. And, you’ll also need to place it near the lowest part of the tank which is close to the drain. Once again, our heater pads made that a challenge. They do give us insight on where we are with our levels, however, the readings are sometimes a little inconsistent. That being said, they are still working far better than the original tank sensors.
@duncan194522 күн бұрын
Thanks Eddie, I have the same problem, but now i will try your idea out tomorrow , Thanks for sharing your video. All the best Duncan, Cornwall UK.
@EddieAtLarge17 күн бұрын
You are most welcome Duncan! Were you able to get your issue resolved?
@duncan194517 күн бұрын
@@EddieAtLarge Hi Eddie, Unfortunately it wasn’t the answer but well worth the time checking. Thanks again as it may well have solved the problem. I don’t actually think the gas is getting through even to the pilot light. Ha ha ha the joys of motor homing 🤣 All the very best Duncan.
@EddieAtLarge17 күн бұрын
Ahhh, sorry to hear that it hasn’t worked out yet. Keep at it and I’m sure you’ll solve the issue with more persistence. And yes, we never get bored while maintaining our rigs! Safe travels. ✌🏻
@duncan194517 күн бұрын
@@EddieAtLarge 🙋♂️👍🏻
@Markpatrickrich24 күн бұрын
Do you know where I can find this product? I keep looking I can’t find it. I would really appreciate your help. You did a great job.
@EddieAtLarge22 күн бұрын
Hey Mark, We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.
@AndrewPettigrew-r7n28 күн бұрын
Hi Eddie - Well that was an important lesson. As soon as I put the Lippert legs in place it all fitted a treat. This was on a Keystone Cougar Sprinter 2021 - Thanks for for help
@EddieAtLarge24 күн бұрын
Awesome! Glad it all worked out. Safe travels!!
@tonymize531828 күн бұрын
Carpet in this video has been discontinued.
@EddieAtLarge24 күн бұрын
Have you tried Trekwood.com? It appears it is still available on their website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon
@Apetetrek28 күн бұрын
Great video,but i can see by the way some of the other hikers were behaving that they like taking risks,or they just dont realise how dangerous of a position their in.
@chuckerpower284129 күн бұрын
Yes! I've been there in January 2024 and there's people hiking in their sandals what a bunch of morons! The walkway you were just on was glare ice you've got to use yaktrax on my hiking because it was glare ice on the ledge before you get to the arch! Too many people with no common Sense hike to this Arch! It's beautiful in well worth the hike! But use your brain the good lord gave you to make smart decisions when hiking here it's only dangerous when you make it dangerous!!!
@ronspears-tm8jsАй бұрын
I have a nice fifth wheel that we live in full time with these blinds. We have several blinds with broken strings. After watching this video I will be attempting to fix them. I will probably be tying a knot at the spring because I don’t have the patience or dexterity to reuse the clips. Thanks 👍🏼
@EddieAtLarge24 күн бұрын
Hi Ron, glad this was helpful! I do have an updated video where I have installed high strength fishing leader in lieu of the lift cord. The new lift cord kept breaking on me. I’ve now installed the fishing leader on all my blinds and it’s been great! RV BLIND (Day/Night Shade) PERMANENT REPAIR - No More ReStringing!! kzbin.info/www/bejne/gKXYmnuEhKtjmac
@AndrewPettigrew-r7nАй бұрын
Yes I ordered it from Amazon - it was meant to be compatible with Lippert - I will return as you suggest and get a new one
@EddieAtLargeАй бұрын
OK. If it is only compatible with Lippert and not actually the Lippert brand, I would recommend ordering the one that is the Lippert brand.
@AndrewPettigrew-r7nАй бұрын
Found your video very helpful - got all the way through to actually fitting the new leg. The distance I have for the supports is the same as in your video 15.5ins. When I put the leg in position the top support fits but the bottom one is some 1/16" out so it is not properly fitting and I cannot get the second lower screw to fit. I guess it comes down to welding tolerances - looks like I need to file the excess to get a proper fit. Thoughts ?
@EddieAtLargeАй бұрын
I just measured the bump outs on my leg outside outside and it measures exactly 15 1/2 inches. I then measured the welded brackets and they measure 15 3/8 inches outside outside. I knew there was some wiggle room there for when I installed the leg, which ends up being 1/8 inch. I would say that you will need to return the leg as you should have that extra 1/8 inch of room to play with. I’m thinking it would not be a good idea to try to file it down and force it to fit. Did you order this from Amazon? Is it the Lippert brand leg?
@DarrelVanderWelАй бұрын
Was there supports on 2 sides of the legs? Because in the video, when you installed the new leg the support was on the bolt side.
@EddieAtLargeАй бұрын
There are supports on both sides of the leg
@parksandpitchesАй бұрын
Can I do this in a Prime Time Avenger?
@EddieAtLargeАй бұрын
You should be able to install it in any type of RV. We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.
@528waterАй бұрын
What brand bike is that?
@EddieAtLargeАй бұрын
It’s a Surron.
@huntleando6791Ай бұрын
Good video..but how did u turn it on?? I heard clicking…😅😅
@EddieAtLargeАй бұрын
It’s magic! 🪄 😆
@mardieskitchenetteetcetera3380Ай бұрын
Wow, you’re the best, im gonna show this to my hubby so he can fix ours too! Thanks & God Bless!🎉👏👌😇
@EddieAtLargeАй бұрын
You’re very welcome! I did however find a better solution for the string replacement. Please see this updated video.
@EddieAtLargeАй бұрын
You’re very welcome! I did however find a better solution for the string replacement. Please see this updated video. RV BLIND (Day/Night Shade) PERMANENT REPAIR - No More ReStringing!! kzbin.info/www/bejne/gKXYmnuEhKtjmac
@mray1375Ай бұрын
People think of these National Parks as safe amusement parks. The will do incredibly stupid stunts.
@MarkpatrickrichАй бұрын
Cool video. Where can you find that product? I clicked your link and it took me to a site but I couldn’t seem to find it. Thank you for your help. Thank you for your tips and information.
@MarkpatrickrichАй бұрын
I noticed on the product you used it has a nice edge on it
@EddieAtLargeАй бұрын
We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.
@akiljones7660Ай бұрын
A well put together and very detailed presentation! Thank you for putting in the work for us!
@reygabrielgarcia3473Ай бұрын
do you think the puck system can be installed on 2006 F450 cab & Chassis with pickup bed?
@EddieAtLargeАй бұрын
Sorry, I’m not sure. You will need to speak to your local Ford dealers parts department to ensure you order the correct one for your truck’s year, make & model if it’s available.
@uknowjoe1Ай бұрын
How do you know if the issue is a jack or the landing gear motor?
@EddieAtLargeАй бұрын
I would always start with the jack. Had both left and right go bad on us in 4 years of full time travel. Thought the same that the motor may have been bad, so, bought an extra to carry with us in case it ever does. There’s also a gear box that attaches to the motor. Bought an extra one of those as well.
@uknowjoe1Ай бұрын
Can you just install a rebuild kit in the lead and follow leg?
@EddieAtLargeАй бұрын
Yes, you should be able to do that. They sell them on Amazon.
@rjkatka2319Ай бұрын
Okay, where do you order this? Because i've asked every dealer rv they give me the run around
@EddieAtLargeАй бұрын
We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.
@tonyasargent57Ай бұрын
Did you use staples to put in the vinyl? Where did you get the vinyl flooring?
@EddieAtLargeАй бұрын
The area under the booth seating is held down by the furniture that is screwed into the floor. We only put one screw (with a washer) in the back left corner behind the seats just to hold that in place until the recliners were reinstalled. The recliners are then secured to the slide floor with screws from underneath and that holds the flooring in place for that section. If your setup is different, I would recommend using small staples along the side and rear perimeter or you may want to glue it down along the edges and leave the remaining “floating” We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.
@tonyasargent57Ай бұрын
Thank you for all the information. @@EddieAtLarge
@RichbundАй бұрын
Excellent narration and video with clear audio. And appears to have been an authentic presentation with little or no shortcuts to illustrate all the steps to install the Ford puck system. Way to go Eddie...
@dancoleman1269Ай бұрын
Good one. Thanks!!
@vrsliderАй бұрын
does it matter if the meter is on top of the tank instead then the bottom?
@EddieAtLargeАй бұрын
Yes, it needs to be on the bottom of the tank for it to work.
@GoNSeetheWorld2Ай бұрын
Do you drive with the dishy on or take it down?
@EddieAtLargeАй бұрын
We take it down before we move. I did a permanent cable run so it is now very quick to install or remove the dish. Here’s a link to that video. STARLINK RV ROOF MOUNT PERMANENT CABLE INSTALLATION kzbin.info/www/bejne/eXzWlXeMYt6EsLM
@fog1359Ай бұрын
Just the video I needed. Saved me a couple hundred bucks for sure. Thank you.
@jkker052 ай бұрын
Great vid. Straight to the point.
@darlaballenger23572 ай бұрын
Just the video we needed. Thank you! I do have a question about the windows like those that go up and down. Mine are very had to open, please tell me there is an easy fix?
@EddieAtLargeАй бұрын
Glad this was helpful! I wish there was an easy fix for your hard to open windows. Fortunately for us, we’ve never had that issue, however, our friends do have the issue and they have not found an easy solution. The windows would most likely need to be removed and reset. If you happen to find an easier fix, please come back to let me know so we can inform our friends. Thanks!
@darlaballenger2357Ай бұрын
@@EddieAtLarge I sure will.
@whohastimeforthis2 ай бұрын
Poor Lady looks like "I'm not sure I signed up for this, but how do I get out of it?" LOL
@EddieAtLarge2 ай бұрын
😂
@DLO3222 ай бұрын
I love bishop’s castle
@henryjones86142 ай бұрын
My rv’s battery is also charged from the vehicles alternator when engine is running. The alternator is designed to charge lead acid batteries. Whats missing here?
@StephenEngdahl-mu9rr2 ай бұрын
Back in the 90s, a rave party was run out of Bishop's Castle by the county. The whole crowd migrated up Phantom Canyon to my property near Victor. It was somewhat unexpected and a train of cars, trucks and old school buses was not a usual sight up there. The transplanted rave went on for a couple of days (loud weird music annoying the mountain folks for miles around), and they kind of trashed the place. In the aftermath of that semi-unplanned fiasco, one man was walking around in the early morning with a plastic bag in his hand, cleaning up the trash the ravers had left behind. That man was Jim Bishop. He gave a shit what had happened to our place through no fault of his own. That is the kind of man I knew him to be. Great guy. Great castle. Don't forget it is also the resting place of his son, who was tragically lost during the construction of the castle.
@philipkrolikowski42482 ай бұрын
where is the woven vinyl replacement available ? what sizes is it available in ? thanks !!!
@EddieAtLarge2 ай бұрын
We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.
@5608Mjh2 ай бұрын
Where did you buy this product?
@EddieAtLarge2 ай бұрын
We ordered ours through our RV dealer in Palm Desert, CA for $300 (including shipping &tax). Because the the newer model of our camper has this same material, we were able to get ours cut to the exact size & have the edge bound at the factory. You can however get this same material from Trekwood RV Parts & Supply online. When you order from Trekwood, you would order the size you need and then you would need to take it to an upholstery shop to bind the edge unless you know how to do that. I know Hobby Lobby sells binding material and other people have used industrial hot glue to adhere it to the edge, however, I've never tried that and I think I would prefer to have it sewn on. Here'a a link to the same material that we installed that's on Trekwood's website. www.trekwood.com/products/1472514/S-O-Carpet-48-x-186-JubilationSoulfulGrey-Yukon They do have other size (and maybe other color) options available. You may want to call them as their website isn't very easy to search and navigate. I used the keyword "jubilation" to search their site as that is the color that we have. Type that keyword in and click through the pages to find other size options. Feel free to let me know if you have any other questions.
@JamesK79112 ай бұрын
I broke so many of these when I was a little kid in my parents camper. That crooked shade look will always stay in my memories 😂
@EddieAtLarge2 ай бұрын
🤣
@christravels3602 ай бұрын
Great stuff here. It is a shame we must do prevention like this to have a piece of mind, but thieves ARE out there. Better safe than sorry. Triggered lights and cameras are a must, especially automatic off-site video storage. I also agree about having dogs. We travel with our "fur children", and they let us know about EVERYTHING that takes place outside. Thanks
@EddieAtLarge2 ай бұрын
We’ve been very fortunate. In 5 years of traveling, never an incident with us personally. Always good to be prepared though! ✌🏻
@christravels3602 ай бұрын
This video is absolute gold! Thanks
@EddieAtLarge2 ай бұрын
Thanks!! 🙏 😊
@BWSmithOnline2 ай бұрын
Do you do all this boondocking on that one 100 amph lithium battery?
@EddieAtLarge2 ай бұрын
We actually now have 3 batteries and 900 watts of solar.
@joemanpjg2 ай бұрын
Awesome video and detail, but if you have a true fear heights and try this hike GOOD LUCK!!!!! NO way you can do it...made it to the chains a few years ago ...would have loved to continue but fear of heights set in...but i got some great photos for my memories
@EddieAtLarge2 ай бұрын
At least you gave it your best shot! 👍🏻
@user-gi5kq4qs1e2 ай бұрын
Good point, thanks
@tommyseabaugh23542 ай бұрын
The dates of races, please would like to visit
@EddieAtLarge2 ай бұрын
I think they may only have the races in the winter when all the “Winter Texans” are there. You can call and ask them though. maps.app.goo.gl/VqffAkefUa2vu3MSA?g_st=ic
@lesliecurry44982 ай бұрын
Safety in numbers.. why not park in a circle like the old western wagon trains?
@EddieAtLarge2 ай бұрын
Stellar idea! We’ve actually seen some people position like this, however, i think it was more so they could hang out at their big fire pit in the center of the ring. 🔥
@tallen15962 ай бұрын
This just happened to our 2019 Cougar. Thank you for making this video!!!
@EddieAtLarge2 ай бұрын
You’re very welcome! Best of luck with your repair. 🤞🏻
@Wildersport2 ай бұрын
Glad to know I am not the only one that posts my screw ups in the videos... I was looking for input on the app. I am rebuilding a Class B motorhome and adding water tanks underslung instead of in the camper. These will really help...
@Sk8StGeorge2 ай бұрын
Our awning was getting little holes and micro tears...you could look up and see sun light poking through. I got a can of Flex Seal black spray and evenly sprayed it on the very top part that is exposed to the sun all day (I first used alcohol to clean the surface). I would NOT recommend this...a year later, the flex seal is chipping off. My next guess is the maybe get eternabond, like 6" or 8" width and run it across the whole area of the awning that is always exposed to the sun. Still debating.... Thanks for the info.
@EddieAtLarge2 ай бұрын
👍🏻 That sounds like a mess. Hope everything works out for your project. 🤞🏻