i think the rubber hose trick is the little gem here, coupled with a glue gun, the back part comes out easily
@bunjicarlin125 күн бұрын
Is this just a😂n issue with the 6 Cylinder Macans? Do the 2.0/2.9 Cylinder suffer from this as well?
@MrDennisn1Ай бұрын
I can do the vent valve repair without removing anything but the engine cover and assembly itself.
@TonyBaumann-q2dАй бұрын
No reason to pull intake. I do them from the bottom without removing anything but the skid plate
@MrDennisn1Ай бұрын
I just did mine from the top. Didn’t remove anything but the engine cover.
@lenclayton1100Ай бұрын
isn't there a emission extended warranty on this problem for fault code P052E71 to 15 YEARS/150,000 MILES for about all Benz's with the 2.0L engine
@bertpainter8385Ай бұрын
Yes there is. I have a Metris same engine. Dealer said it's not covered for me. So I called main Customer Service and they asked me for my VIN # to see if my Metris was covered and also said NO. I talked with an customer service guy from my code reader app documentation which says it should be covered. He said the the dealers don't want to do the job because they have to go through a lot to get reimbursed by MB. After talking to 2 customer service reps on phone I gave up. So I'm going to try to replace the same part myself. My engine layout is different than this video, but still a royal pain to get to. But I think I can do something similar to what he did here. Also the guy from my code reader app said you got to really bother them at MB customer service and to go as far to ask for a supervisor and maybe that would help. I don't know why my MB Metris VIN # doesn't come up when they search. They mention a bunch of MB models that do though. So maybe yours will.
@AlundrahsАй бұрын
Can you use this on a Metris?
@bertpainter8385Ай бұрын
I'm going to try it today or tomorrow and see how it goes. I did look into it and move some parts aside to see if I could get to it more easily on the Metris, but that one hard plastic hose going underneath I guess to what he said in this video, is the intake manifold (I couldn't see down under there very well) would come off for me. It feels like a push on rubber connector (no clamp) like a spark plug has. I didn't want to go after it with much force because I was just inspecting the job to see what's involved on the Metris, so it might just pop off. If it does pop off I think it will be a much easier removal than what this video shows. Still have to adapt the new part to fit the existing connections. I'll repost here afterwards. I posted a message of the most recent post by lenclayton100 about calling MB customer service to see if it's covered under the extended warrantee MB had to oblige in 2023. They looked up my VIN # and said no, but I wouldn't be surprised if you got the right person on the phone it may actually be. It's the same damn engine as all the other models that are covered and it's an EPA infraction that made them put it under the warrantee in 23'. I was told you have to fight hard to get both the dealership and customer service to fix it under that newer extended warrantee.
@bertpainter8385Ай бұрын
Update after finished replacing part. It wasn't hard at all on the Metris. You don't have to move much except for the air filter bracket (3 screws) and the Coolant overflow container (2 screws). Both just have to be moved aside not disconnected. It's still tight to remove the same part he shows. The tube line he mentioned that is made of plastic and kinked on him is the part that was iffy. Only because I didn't know if I made that cut if I'd ruin the part if I was wrong. But now that it's done I could do it again in about 1 to 2 hours at most. An hour if I was young again. lol. I left the plastic line connect and reused that hose. I cut that hose just at the bib of the old part. Cut off the same plastic tube on the new part completely off right up until the barbed connection and used the rubber coupling connector that comes with the new part to splice them together. It's pretty simple once you know you aren't going to screw it up. There was an awful lot of oil on the electrical connection line. I believe that's the reason for why the part causes a code. I'm going to try to test the voltage and see if it what it does. Supposedly you can blow into it when activated it opens when no charge it's closed or maybe reversed. Have to read about that part again. I'll test before cleaning all the oil and then after trying to clean the oil on the old part just to see if it will work. I also watched a view videos with the MB C300, C350 etc. And the reason for all the oil seems to be due to the Oil drip pan and breather. one Video here but not for the Metris. Have to do more searching for the Metris repair. It's not in the same place that that I can see. kzbin.info/www/bejne/fWXJp2OflLSbhck
@ianhardin1148Ай бұрын
Awesome! I still need to figure our if I can fit into one!
@Wizzie-944Ай бұрын
Looks great
@ALFARWAN62 ай бұрын
Curious,why did not redo the old one and put it back
@ALFARWAN62 ай бұрын
❤
@Mastar04202 ай бұрын
Hi Jeff. Will this work on a 2016 cla250? And do you have a link that you trust to send you the right part?
@AsifAli-qr8pk2 ай бұрын
Thank you so much, sir, for making this beautiful video. It's really helpful that you have done it really well. I will be doing this job after watching your video. How long this job was and how much you think it should charge for this job? Much appreciated sir
@patlab2 ай бұрын
From Canada. I just contacted my dealer who knew nothing about this ''extended'' warranty so I contacted Mercedes Canada and well ... NO, there is nothing like this in Canada. If you have any information to the contrary, I'd love to hear from you.
@bertpainter8385Ай бұрын
What model to you have. Mine is a Metris and they told me a number of other models are covered but not my Metris. Was told you have to fight hard and get the right person on the phone at customer service from MB. The dealer will not say yes unless they are told by MB.
@patlabАй бұрын
@@bertpainter8385 Thank you for your comments. I have a GLA 250 and am from Canada. What I learned since is that here, it's only the C series that got an extension.
@bertpainter8385Ай бұрын
@@patlab That sucks. I don't get why the same engine on all these models aren't covered since they all seem to have the same problems at around 70K mi. Must have been some law suit that only mentions certain models that made the EPA make MB fix them. Idk. I did my repair yesterday. It was much easier to do on my Metris than what this video shows for his car. I could do it again in an hour now that I know. This video shows way more parts to be move than what I had to do. Still a tight area to work in but doable. Good luck. In case you're not aware. I believe it's the oil vapor that cause the PCV to go bad. Probably gets stuck from the oil buildup after years. There's another part called the "Oil drip pan/breather port" that the seals dry out and/or enlarge by the passenger side firewall that causes the oil to go to the PCV and should get replaced and checked every so often. Eventually if the oil builds up in the intake everything starts to go. My Metris is different and I'm having trouble finding more on how it's design, but it seems all the other models with this engine have those other 2 parts that are the main cause of the E0271 code/engine light issue.
@XX-rz9vw21 күн бұрын
@@patlab I am also from Canada. A few days ago, my 2017 GLC started having the same issue. Does GLC get the extension?
@malcolmfrazier80342 ай бұрын
You did diy god’s work, bless your heart ‼️… i am pretty sure we all will refer to your video to do the same 🫡
@evanlangley91302 ай бұрын
GREAT VIDEO THANK YOU SIR!
@Yo-dr2ux2 ай бұрын
Otra avería más a sumar a mi glc.... donde están los verdaderos mercedes?????
@johndao46603 ай бұрын
good trck remove broken bolt
@johndao46603 ай бұрын
i buy alot part and tool scanner from them
@darwincollado89933 ай бұрын
Thank you so much Jeff! great video! As I’m in the process of upgrading the dash to a 2019! I’m think is doable! I love how you go into detail of why something happened and how to fix it and how to prevent it! Loving my macan! You are the best
@aronpritchett99893 ай бұрын
Great easy to follow video and extremely valuable comment section. I just called my MB dealer and they said my 2016 glc300 is covered under the 15/150000 extended warranty for this repair. And to be clear my warranty has expired…so the repair is covered regardless of the warranty you originally purchased. I’m extremely thankful I watched this video and read the comments
@bertpainter8385Ай бұрын
I have a Metris with same exact engine both dealer and MB said my VIN# doesn't show up on the newer extended warrantee. But I was told to fight hard that it should be from a rep of my code reader app. He did say it may take a lot to get them to do it. So I'm just going to try. Metris seems to be less parts to move around to do what this video shows. I hope.
@porscheDIY3 ай бұрын
Ufff… that looks exhausting man! Great Job! I do however have an idea of what you just went through. About 14 years ago, I had to do the same with an Acura TL I had. The dashboard top cracked, bought one new and replaced it myself… I however didn’t have any screws left when I finished…😂. But… I lost one through one of the AC vents… 😂. Good thing that you don’t have to remove the steering column in the Macan (I had to do that in my Acura and it was the most difficult part of the job). In any case, it looks fantastic now. Thanks for sharing your experience and great job!
@jby20094 ай бұрын
im having the same issue with my cla250, i wish that i live near you, so i just pay you to fix it
@isavier3 ай бұрын
Same did you ever get it fixed
@jby20093 ай бұрын
@@isavier not yet
@jenkikat64953 ай бұрын
I have a CLA250 and having the same issue too! Wish there was a full step by step detail video showing how to fix the issue; not just saying remove part xyz; I need to see how its done so I can do it
@isavier3 ай бұрын
@@jenkikat6495 yup I’ve looked and can’t find a video
@isavier3 ай бұрын
@@jenkikat6495 haven’t Dive it for like a month since the check engine came on
@1000raulm4 ай бұрын
Bravo!! Excellent work. Thank you for making this video. It will definitely come handy for macan owners who need to remove their dash.
@kevingan5614 ай бұрын
hey where you located
@kevingan5614 ай бұрын
hey where you located i would love for you to work on my gla too
@DENTMAN-pdr4 ай бұрын
Does that part for the glc identical in part number for a 2016 mercedes metris? I have same code..p502E-71 Thx
@nguzidane41304 ай бұрын
Hello please I have similar issue with my Mercedes cla 250 can anyone help me out to fixed the crankcase
@jacobflorentin55204 ай бұрын
Great work! Congrats!
@jeffwagoner84374 ай бұрын
Thanks, Jacob!
@jeffwagoner84374 ай бұрын
Releasing the steering wheel airbag on a Porsche Macan requires pushing a lever via 2 access holes on the back of the steering wheel. I couldn’t find any holes in mine, then I realized the full leather interior meant that the holes were covered in leather. So, I poked around with a small screwdriver until I found them.
@justmyopinion83954 ай бұрын
There is a lot of mixed information in the comments. To be clear, Mercedes issued a 15year/150k mile extended warranty, which ever comes first. The requirement is that your check engine light needs to be on and showing a P052E fault code. It doesn’t matter if you have an extended warranty or not. It’s issued directly from Mercedes. Everyone with the 4 cylinder turbocharged engine found in various models from 2015 to 2020 is covered by this warranty. It doesn’t matter where you bought it from or if you’re the original owner or not. Take it to the dealer and they will repair it free under warranty. Scan the fault code first before you take it in to the dealer. Make sure you are specifically getting a P052E fault code because if it is something else, you will be charged $280 dollars just for the diagnostic. I hope this answers everyone’s questions and helps to clear everything up. Have a nice day.
@GlobalPath4 ай бұрын
This bulleting was issued in Canada in March. US had it for a year.
@nguzidane41304 ай бұрын
What if the car is a cla 2014 , please reply me
@octaviorenteria14044 ай бұрын
Thank you very much
@brandoncloud4 ай бұрын
@@GlobalPath Glad to see that. I got a glc300 2019 and just got this code. Could you kindly share with me where to find that bulletin?
@bertpainter83853 ай бұрын
Hopefully I will hear back from my post. I have the P052E code and a number of other recall notices for my 2016 Metris Cargo van. I scheduled the appointment for the recalls and to diagnose the PCV valve code. They told me it's not showing up as being covered for the P052E code. I told them their is an extended warrantee added for this code and that it should be covered now. He said to call this number for MB customer service and they'll check in more detail, but it's not showing up as covered in his system. After calling that number and giving my information the lady checking on coverage said my Metris is not covered. I've research online for extended warrantees for the crankcase ventilation system problem and haven't had much luck finding any absolute answers for my Van. I see some information that shows other MB vehicles but not for a Metris. When you contact this site and call them, BlueTecUpdate.mbusa.com with any questions, or contact us at 1-833-841-9362, the automated message mentions the MB Sprint having the problem warrantee coverage, but no mention of Metris. But I would imagine this is a problem across the board for all 4 cylinder turbocharged engines of those year models which is mine. Any guidance would be greatly appreciated. I've spent 20 hours watching videos to repair and researching warrantee info. I was hoping MB customer service would have a solution for me, but the woman on the phone sounds like she was going by a script as do most conversation by phone go these days.
@alekseygeyvandov13894 ай бұрын
You say easy??😂😂😂😂😂😂😂
@rolandbenko4 ай бұрын
Please make a cheap fix for p06DA code 🙏 this video is pricesless thank you so much !
@gsingh29475 ай бұрын
MBusa & MBcanada has extended emission warranty for certain model years. Here’s the official MB link - static.nhtsa.gov/odi/tsbs/2023/MC-10241531-0001.pdf
@OlehProtsiuk5 ай бұрын
Hey, where did you buy this part? Could you share a link?
@joekhoury99755 ай бұрын
At what milage do you suggest cleaning or changing the pcv valve. I have a cla 250 2014, 60k miles till now. I do not want to wait untill it is clogged or blocked, i will meither clean or change it. Please advice what milage to do so to prevent this from happening. I changed the serp belt and i had a squeaking noise, i still hear this every once in a while i donno if this pcv valve does this too, pushing the crankshaft seal to touch and make this sound...
@mistyday5 ай бұрын
I had to replace my air intake
@anthonydepoti71325 ай бұрын
the dealer said my 2019 GLC 300 vehicle needed a software update that should fix it. we shall see.
@dargamike6 ай бұрын
Would that part work for the 2017 E300? Thanks for posting this!
@akuamcilwain45796 ай бұрын
I need mine replaced on a 2018 GLA 250. Any of you do this work? I’ll travel reasonably but I live in Michigan.
@osami_-96415 ай бұрын
I can do it I live in Windsor but I can come to Michigan and do it for you
@Alpha_kicks4 ай бұрын
Were you able to fix it ? I started getting that code since last week
@akuamcilwain45794 ай бұрын
No I haven’t gotten it fixed yet. The person above stated they could fix it but they live in Canada so I don’t know if they have a shop or how much it would be.
@Alpha_kicks4 ай бұрын
You still driving with the light on ? I hope it’s not getting worse
@akuamcilwain45794 ай бұрын
@@Alpha_kicksyes…it only affects your emissions. BUT I was told that if something does go wrong with the engine you will not know because the light is on and you’re thinking it’s just the valve issue.
@grzegorzwadny51046 ай бұрын
Hi Problem solved? Regards
@pityordonez19036 ай бұрын
This kind of replacement, required to take the entire motor out of the bay and work with the motor free. This cost about 7-8K. A 2016 Macan Turbo 50K. But because Y got an extended warranty. Not the ones that cost $500.00 but 5K. Your mechanic will submit all the necessary changes that your unit needs and a certified porsche insurance tech. either recommend or not the payment. This is usually approved by goods honorable warranties. Now the other side of the story is that Porsche is putting together a "recall" to replace these 9 aluminum screws that can produce a catrastofic oil leak and damage the timing chain. I wasn't going to wait for Porsche, so I went to a certified boutique Porsche shop that only used genuine Porsche parts. It took 2 weeks to complete the job, along with changing brake pads and calipers painting. LRO
@georgefitter76566 ай бұрын
My 2015 C300 4Matic gave the same P052E code so I took it to my dealer in New Jersey. Service manager said that Mercedes Benz extended the warranty till 2029 to repair the issue. He said the part is back ordered but I’m on the list.
@jt-yf1kv6 ай бұрын
Said the same for me smh been waiting for two months.
@lixiaoyu10675 ай бұрын
been waiting for 3 months... wonder if you guys got it fixed?
@johnsonwu1266 ай бұрын
There are 2 others. It’s an at least 4 bolt fix. Pop the plastic engine cover and you will see them. One on each side. They shear the same way. The passenger side a bit tougher as the PCV valve hose is in the way. Yes the T30 bits love to disappear even if you pop the belly pan you won’t find them.
@the_first_resort9407 ай бұрын
I’m a benz tech, had no idea these come separate from the whole oil separator, this job pays 3-4 hrs warranty and I get them done in about a hour. Ac compressor doesn’t have to be removed just remove belt and all the bolts besides the bottom mounting screw for compressor then swing it out of the way to get the front bolts on the side of the cylinder case. Use a floor jack or at stand .. remove ds engine mount then engine leg. You can put a block of wood under the engine some where to hold it there if not it won’t sag much. Then after that you can get at the whole assembly. I’m happy to know you can just replace the valve because when we do it we have to replace the valve, intake pipe on the turbo and oil separator all as one which really isn’t necessary. I figure I can offer this cheaper repair that you do to customers on the side(I obviously can’t do this in the dealer unless approved by MB) this would really take me 10minutes
@mryz1234 ай бұрын
I'd happily pay you for this....
@nguzidane41304 ай бұрын
Hello please I have similar problem can you help out
@AlundrahsАй бұрын
Where are you located? I need this done on my Metris
@rookworst737 ай бұрын
Hello, you bought the wrong part for the GLA 250, the part number is A2700184600 and you can replace it in one piece, it is hard the reach the clamp under the thermostat, but you changed it to so it was easy, replaced mine two weaks ago 😊
@ryankelley850918 ай бұрын
I just went to the dealer and they confirmed this part is under a 15 year warranty from Mercedes Benz. So I am covered for 7 years. The light comes on every 18 months, so it might need repaired 4 more times under warranty. Crazy that they can't find a fix that will last.
@powayimports41758 ай бұрын
Mercedes has extended the whole repair for 15 years 150,000 miles. Save yourself the headache.
@badboy17pt7 ай бұрын
In what country
@akuamcilwain45796 ай бұрын
And this is not for the Gia 250. They are not offering the extended warrant for that car right?
@Alpha_kicks4 ай бұрын
@@akuamcilwain4579 yep it’s the same issue with other ones but they are covered but GLA250 is not
@azzazzello13688 ай бұрын
"easy"
@tacaterry52978 ай бұрын
Mine is showing circuit open
@DJ1708 ай бұрын
What the plug do on the PCV Vavle ? Heated or it is a motor ?